Supermicro SuperServer 6026TT-HTRF Bedienungsanleitung

SUPER

USER'S MANUAL

Revision 1.0d

SuperServer 6026TT-HTF

SuperServer 6026TT-HTRF

SuperServer 6026TT-HIBXF

SuperServer 6026TT-HIBXRF

SuperServer 6026TT-HIBQF

SuperServer 6026TT-HIBQRF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0d

Release Date: May 08, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F. Installation and maintenance should be

performed by experienced technicians only.

The SuperServer 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F is a 2U Twin2(four

serverboards/nodesina2Uchassis)rackmountserverbasedontheSC827H-(R)1400B

server chassis and six serverboards (Super X8DTT-H(F)/HIBX(F)/HIBQ(F)) An

optional redundant power supply may be added to the system (indicated by the

"(R)" in the product name). The "(H)" in the product name indicates that the system

is cableless.

The main differences between the various serverboards, and the servers they are

in, is shown in the table below:

Model Variations (Differences between X8DTT-H models)

X8DTT-H /-HF /-HIBX /-HIBXF /-HIBQ /HIBQF

IPMI 2.0 w/ KVM

Over LAN No Yes No Yes No Yes

InﬁniBand

Connection No No Yes Yes Yes Yes

DDR IB No No Yes Yes No No

QDR IB No No No No Yes Yes

Manual Organization

Chapter 1: Introduction

Theﬁrst chapterprovidesa checklistof themaincomponents includedwiththe server

system and describes the main features of the Super X8DTT-H(F)/HIBX(F)/HIBQ(F)

serverboard and the SC827H-(R)1400B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F into a rack and check out the server

conﬁguration prior to powering up the system. If your server was ordered without

the processor and memory components, this chapter will refer you to the appropriate

sections of the manual for their installation.

iii

Preface

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F User's Manual

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTT-H(F)/HIBX(F)/HIBQ(F)

serverboard, including the locations and functions of connectors, headers and

jumpers. Refer to this chapter when adding or removing processors or main memory

and when reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC827H-(R)1400B 2U rackmount

server chassis. You should follow the procedures given in this chapter when

installing, removing or reconﬁguring SATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots....................................................................................... 1-2

Ethernet Ports................................................................................................. 1-3

Onboard Controllers/Ports ..............................................................................1-3

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................ 1-3

InﬁniBand ........................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................1-5

System Power................................................................................................. 1-5

SATA Subsystem.............................................................................................1-5

Control Panel ..................................................................................................1-5

Rear I/O Panel................................................................................................ 1-5

Cooling System............................................................................................... 1-5

1-4 Advanced Power Management (for -F Models Only)..................................... 1-6

Intel® Intelligent Power Node Manager (NM)................................................. 1-6

Manageability Engine (ME).............................................................................1-6

1-5 Contacting Supermicro....................................................................................1-7

1-6 2U Twin2: System Notes ................................................................................. 1-8

Nodes.............................................................................................................. 1-8

System Power................................................................................................. 1-8

SATA Backplane/Drives...................................................................................1-8

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

vii

Table of Contents

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ...................................................................................2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground .........................................................................................2-4

Removing the Protective Film.........................................................................2-4

2-5 Rack Mounting Instructions............................................................................. 2-5

Separating the Sections of the Rack Rails..................................................... 2-5

Installing the Inner Rail Extensions ................................................................ 2-6

Outer Rack Rails.............................................................................................2-7

2-6 Checking the Serverboard Setup.................................................................... 2-9

2-7 Preparing to Power On................................................................................. 2-10

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons.....................................................................................3-1

Power.............................................................................................................. 3-1

UID.................................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Alert................................................................................................................. 3-2

NIC.................................................................................................................. 3-2

3-4 SATA Drive Carrier LEDs................................................................................ 3-2

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ......................................................................4-18

viii

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard...............................................................................5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-2

Connecting Data Cables.................................................................................5-3

Connecting Power Cables ..............................................................................5-3

Connecting the Control Panel.........................................................................5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Processor and Heatsink Installation................................................................5-5

Installing LGA1366 Processors....................................................................... 5-5

Installing a CPU Heatsink...............................................................................5-7

Removing the Heatsink...................................................................................5-8

5-6 Installing Memory............................................................................................ 5-9

Memory Support.............................................................................................. 5-9

5-7 Adding PCI Cards......................................................................................... 5-12

5-8 Serverboard Details ......................................................................................5-13

5-9 Connector Deﬁnitions....................................................................................5-15

5-10 Jumper Settings............................................................................................ 5-21

5-11 Onboard Indicators........................................................................................ 5-23

5-12 Serial ATA Connections.................................................................................5-24

5-13 Installing Drivers............................................................................................ 5-25

Supero Doctor III...........................................................................................5-26

5-14 Serverboard Battery......................................................................................5-28

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel ..................................................................................................6-2

6-3 System Fans................................................................................................... 6-2

Fan Conﬁguration............................................................................................ 6-3

System Fan Failure.........................................................................................6-3

6-4 Hard Drive Installation/Removal......................................................................6-4

Overview ......................................................................................................... 6-4

Installing and Removing Hard Drives .............................................................6-4

6-5 Node Installation/Removal.............................................................................. 6-7

6-6 Installing the Air Shrouds................................................................................ 6-9

Air Shrouds ..................................................................................................... 6-9

6-7 Power Supply.................................................................................................. 6-9

Power Supply Failure: Single Power Supply Module..................................... 6-9

Power Supply Failure: Redundant Power (Two Modules)............................6-10

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-24

7-5 Boot Conﬁguration ........................................................................................ 7-25

7-6 Exit Options...................................................................................................7-26

7-7 BIOS Recovery .............................................................................................7-28

How to Recover the AMIBIOS Image (-the Main BIOS Block).....................7-28

Boot Sector Recovery from a USB Device.............................................. 7-28

Boot Sector Recovery from an IDE CD-ROM.......................................... 7-29

Boot Sector Recovery from a Serial Port ("Serial Flash")....................... 7-29

Appendix A BIOS Error Beep Codes

A-1 BIOS Error Beep Codes .................................................................................A-1

Appendix B System Speciﬁcations

Table of Contents

Notes

SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6011H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018TR-T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510T-WTR-EU Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620U-TNR Bedienungsanleitung

Supermicro

Supermicro A+ AS-2013S-C0R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 7088B-TR4FT Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1028GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer 4029GP-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028BT-HTR+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028R-TDWNR Bedienungsanleitung

Supermicro

Supermicro AS-1024US-TRT Bedienungsanleitung

Supermicro

Supermicro SYS-F629P3-RTB Betriebsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FTN10P Bedienungsanleitung

Supermicro

Supermicro SuperServer 4027GR-TR Bedienungsanleitung

Supermicro

Supermicro 4048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029TR-HTR Bedienungsanleitung

Supermicro

Supermicro SuperServe 1019D-FHN13TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 120C-TR Bedienungsanleitung

Supermicro

Supermicro 8050 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN12RV-NEBS Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung