Supermicro 8028B-TR4F Bedienungsanleitung

SUPERSERVER®

8028B-TR4F

8028B-C0R4FT

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: June 28, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

8028B-TR4F/C0R4FT Installation and maintenance should be performed by

experienced technicians only.

The SuperServer 8028B-TR4F/C0R4FT is a high-end server based on the

SC828TS-R1K43LPB 2U rackmount chassis and the X10QBL-4(CT) quad

processor serverboard. The only difference between the two server models is that

the 8028B-TR4F server only has SATA connections and 1G LAN ports, while the

8028B-C0R4FT server contains both SATA and SAS connections and 10G LAN

ports..

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10QBL-4(CT) serverboard

and the SC828TS-R1K43LPB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

8028B-TR4F/C0R4FT into a rack and check out the server conﬁguration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8028B-TR4F/C0R4FT.

SUPERSERVER 8028B-TR4F/C0R4FT User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10QBL-4(CT) serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC828TS-R1K43LPB server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring SAS/SATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed

information on running the CMOS Setup Utility for the X10QBL-4(CT) serverboard.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

SAS (8028B-C0R4FT Server Only) ................................................................ 1-2

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller ......................................................................................... 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-4

PCI Expansion Slots ....................................................................................... 1-4

Front Control Panel......................................................................................... 1-4

I/O System ...................................................................................................... 1-4

Cooling System ............................................................................................... 1-4

1-4 Advanced Power Management....................................................................... 1-5

Intel® Intelligent Power Node Manager (NM)................................................. 1-5

Manageability Engine (ME)............................................................................. 1-5

1-5 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Cautions! ......................................................................................................... 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-4

SUPERSERVER 8028B-TR4F/C0R4FT User's Manual

vii

2-5 Rack Mounting Instructions............................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Locking Tabs ................................................................................................... 2-5

Releasing the Inner Rail ................................................................................. 2-6

Installing The Inner Rails on the Chassis....................................................... 2-7

Installing the Outer Rails on the Rack............................................................ 2-8

Standard Chassis Installation ......................................................................... 2-9

Optional Quick Installation Method ............................................................... 2-10

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Power .............................................................................................................. 3-1

Reset............................................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power LED...................................................................................................... 3-2

Universal Information LED .............................................................................. 3-2

HDD LED ........................................................................................................ 3-2

NIC2 LED........................................................................................................ 3-3

NIC1 LED........................................................................................................ 3-3

Power Fail LED............................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal ........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Table of Contents

viii

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-4

5-4 Installing the Processor and Heatsink ............................................................ 5-5

Installing the Intel E7-8800 v3/v4 or E7-4800 v3/v4 series Processor ......... 5-5

Installing a Passive CPU Heatsink ................................................................. 5-9

Removing the Heatsink................................................................................. 5-10

5-5 Installing Memory...........................................................................................5-11

Removing Memory Modules ......................................................................... 5-12

Memory Support for the X10QBL-4(CT) Motherboard............................. 5-12

RDIMM/3DS LRDIMM DDR4 ECC in Performance Mode (2:1) ............. 5-13

5-6 Adding PCI-E Add-On Cards ........................................................................ 5-14

RDIMM/3DS LRDIMM DDR4 ECC in Lockstep Mode (1:1) ................... 5-14

5-7 Serverboard Details ...................................................................................... 5-15

5-8 Connector Deﬁnitions ................................................................................... 5-18

5-9 Jumper Settings ............................................................................................ 5-25

Explanation of Jumpers ................................................................................ 5-25

5-10 Onboard Indicators........................................................................................ 5-28

5-11 SAS/SATA Ports............................................................................................ 5-30

5-12 Installing Software......................................................................................... 5-31

SuperDoctor 5 ............................................................................................... 5-32

5-13 Serverboard Battery ...................................................................................... 5-34

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-2

6-4 Removing and Installing Chassis Fans........................................................... 6-4

6-5 Installing the Air Shroud.................................................................................. 6-6

6-6 Expansion Slot Setup...................................................................................... 6-7

6-7 Removing the Hard Drive Tray and Installing a Hard Drive ........................... 6-8

6-8 Power Supply ................................................................................................ 6-10

SUPERSERVER 8028B-TR4F/C0R4FT User's Manual

Removing the Power Supply..........................................................................6-11

Installing the Power Supply .......................................................................... 6-12

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting the Setup Utility ................................................................................. 7-1

4-2 Main Setup...................................................................................................... 7-2

4-3 Advanced Setup Conﬁgurations...................................................................... 7-4

4-4 Event Logs .................................................................................................... 7-33

4-5 IPMI............................................................................................................... 7-35

4-6 Security......................................................................................................... 7-37

4-7 Boot............................................................................................................... 7-38

4-8 Save & Exit ................................................................................................... 7-40

Appendix A BIOS Error Beep Codes

A-1 BIOS Error Beep Codes .................................................................................A-1

Appendix B System Speciﬁcations

Table of Contents

SUPERSERVER 8028B-TR4F/C0R4FT User's Manual

Notes

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 8016B-TLF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6049P-E1CR45H Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-E Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-M2 Bedienungsanleitung

Supermicro

Supermicro 8025C-3R Bedienungsanleitung

Supermicro

Supermicro SBI-7128R-C6 Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 5086B-TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6029BT-DNC0R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039C-I Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741P-TR Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1115CS-TNR Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro 5018D2-AR12L Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TR Bedienungsanleitung

Supermicro

Supermicro 8048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SC-830W Bedienungsanleitung

Supermicro

Supermicro SuperStorage 5049P-E1CR45L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-72RF Bedienungsanleitung

Supermicro

Supermicro SuperStorage Server 2028R-NR48N Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN12RV Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung