Supermicro FatTwin F617H6-FTL+ Bedienungsanleitung

SUPER

USER'S MANUAL

Revision 1.1a

FatTwin

F617H6-FTL+

F617H6-FTPTL+

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Revision 1.1a

Release Date: January 23, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

ThismanualiswrittenforprofessionalsystemintegratorsandPCtechnicians.Itprovides

information for the installation and use of the FatTwin™ F617H6-FTL+/FTPTL+.

Installation and maintainance should be performed by experienced technicians only.

The FatTwin F617H6-FTL+/FTPTL+ is a high-end server based on the

F414IS-R1K62B 4U rackmount chassis and a dual processor X9DRFF-7G+/7TG+

serverboard. All models have four serverboard nodes each with an IPMI LAN port

and twelve (12) 3.5" ﬁxed HDD drives and two (2) 2.5" optional ﬁxed HHD drives

each per node. The F617H6-FTPTL+ server uses 10-Gigabit LAN ports whereas

the F617H6-FTL+ server uses Gigabit LAN ports.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with

the server system and describes the main features of the X9DRFF-7G+/7TG+

serverboards and the F414IS-R1K62B chassis.

Chapter 2: Server Installation

ThischapterdescribesthestepsnecessarytoinstalltheFatTwinF617H6-FTL+/FTPTL+

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

FatTwin F617H6-FTL+/FTPTL+.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRFF-7G+/7TG+ serverboards,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

FatTwin F617H6-FTL+/FTPTL+ User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the F414IS-R1K62B server chassis.

You should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

FatTwin F617H6-FTL+/FTPTL+ User's Manual

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Onboard SAS..................................................................................................1-2

Onboard Serial ATA ........................................................................................ 1-3

PCI Expansion Slots....................................................................................... 1-3

I/O Ports.......................................................................................................... 1-3

Graphics Controller......................................................................................... 1-3

Nuvoton WPCM450 Controller .......................................................................1-3

WPCM450R DDR2 Memory Interface ....................................................... 1-4

WPCM450R PCI System Interface............................................................ 1-4

Other Features Supported by the WPCM BMC Controller........................1-4

SATA Drive Power...........................................................................................1-5

Super I/O.........................................................................................................1-5

1-3 Server Chassis Features ................................................................................ 1-5

System Power.................................................................................................1-5

SAS/SATA Subsystem.....................................................................................1-5

I/O Ports.......................................................................................................... 1-5

Cooling System...............................................................................................1-6

Air Shrouds ..................................................................................................... 1-6

Mounting Rails ................................................................................................ 1-6

1-4 Advanced Power Management....................................................................... 1-6

Intel® Intelligent Power Node Manager (NM).................................................1-6

Manageability Engine (ME).............................................................................1-6

1-5 Contacting Supermicro....................................................................................1-8

1-6 Fat Twin: System Notes..................................................................................1-9

Nodes.............................................................................................................. 1-9

System Power.................................................................................................1-9

SAS/SATA Backplane/Drives ..........................................................................1-9

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup......................................................................................... 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

FatTwin F617H6-FTL+/FTPTL+ User's Manual

vii

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-4

2-5 Rack Mounting Instructions............................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Adjusting the Rails.......................................................................................... 2-4

Locking Tabs................................................................................................... 2-5

Installing the Rails on a Rack.........................................................................2-6

Chassis Installation......................................................................................... 2-7

2-6 Checking the Serverboard Setup.................................................................... 2-8

2-7 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-3 F414IS Front I/O Control Panel......................................................................3-1

3-4 Control Panel LEDs ........................................................................................3-2

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Table of Contents

viii

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting SATA Power Cables.....................................................................5-2

Connecting Data Cables................................................................................. 5-2

5-3 Control Panel Connectors and I/O Ports........................................................ 5-2

5-4 Processor and Heatsink Installation................................................................5-3

Installing a CPU Heatsink............................................................................... 5-7

Removing the Heatsink...................................................................................5-7

5-5 Installing Memory............................................................................................ 5-8

Removing Memory Modules ...........................................................................5-9

Memory Support..............................................................................................5-9

5-6 Serverboard Details ...................................................................................... 5-16

5-7 Connector Deﬁnitions.................................................................................... 5-19

5-8 Jumper Settings............................................................................................ 5-23

Explanation of Jumpers ................................................................................ 5-23

5-9 Onboard Indicators........................................................................................5-25

5-10 Serial ATA Connections................................................................................. 5-27

5-11 Installing Drivers............................................................................................ 5-28

SuperDoctor III.............................................................................................. 5-29

5-12 Serverboard Battery...................................................................................... 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Power Cord.............................................................................. 6-3

6-4 Removing Nodes from the Chassis................................................................ 6-3

6-5 Removing the Node Cover..............................................................................6-4

6-6 Installing and Removing Hard Drives .............................................................6-5

Replacing Fixed 3.5" Hard Drives...................................................................6-6

6-7 Node Conﬁguration......................................................................................... 6-7

6-8 Removing and Installing the Backplane.......................................................... 6-8

Removing the Backplane................................................................................ 6-8

6-9 Power Adapter Board Replacement..............................................................6-10

6-10 Installing the Motherboard ............................................................................6-11

Compatible Motherboards..............................................................................6-11

FatTwin F617H6-FTL+/FTPTL+ User's Manual

Permanent and Optional Standoffs................................................................6-11

6-11 Installing Expansion Cards ........................................................................... 6-13

PCIE Slot Setup............................................................................................ 6-13

Installing a Low-Proﬁle Expansion Card....................................................... 6-14

Installation Complete.....................................................................................6-15

6-12 Replacing Exhaust Fans............................................................................... 6-16

6-13 Replacing the Power Supply......................................................................... 6-18

Power Supply Replacement.......................................................................... 6-19

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data.........................................................7-2

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-3

7-4 Event Logs.................................................................................................... 7-23

7-5 IPMI............................................................................................................... 7-25

7-6 Boot............................................................................................................... 7-27

7-7 Security......................................................................................................... 7-28

7-8 Save & Exit................................................................................................... 7-29

Appendix A System Speciﬁcations

Table of Contents

Notes

FatTwin F617H6-FTL+/FTPTL+ User's Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperBlade SBI-621E-1C3N Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-631E-E1CR16H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER E102-9AP-L Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FTN10P Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperStorage L-Serie Bedienungsanleitung

Supermicro

Supermicro 8060 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E302-12A-4C Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7125W-S6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN5TP Bedienungsanleitung

Supermicro

Supermicro SuperStorage 5049P-E1CR45L Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NEL32R Bedienungsanleitung

Supermicro

Supermicro AS-2114S-WN24RT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 5049A-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-M Bedienungsanleitung

Supermicro

Supermicro SBI-7127RG-E Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1R Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-E301-9D-8CN4 Bedienungsanleitung

Supermicro

Supermicro AS -5019D-FTN4 Bedienungsanleitung

Supermicro

Supermicro 2027R-E1R24L Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-4CN10P Bedienungsanleitung

Supermicro

Supermicro SuperServer 220BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6027TR-DTRF+ Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung