Supermicro SBI-7127R-SH Bedienungsanleitung

SBI-7127R-SH

Blade Module

User’s Manual

Revison 1.0

SBI-7427R-T3 Blade Module User’s Manual

0-ii

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this product may expose you to lead, a

chemical known to the State of California to cause birth defects and other reproductive

harm.

Manual Revision 1.0

Release Date: December 03, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

0-iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of the Supermicro SuperBlade®system’s SBI-7127R-SH blade

module. Installation and maintenance should be performed by experienced

professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with

SBI-7127R-SH blade module and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing SBI-7127R-SH blade

module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBI-7127R-SH blade module into the

SuperBlade chassis. Other sections cover the installation and placement of memory

modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about SBI-7127R-SH blade

module. Included here are descriptions and information for mainboard components,

connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for SBI-7127R-SH blade module.

Appendix A: BIOS POST Codes

BIOS POST Codes for SBI-7127R-SH blade module are explained in this appendix.

SBI-7127R-SH Blade Module User’s Manual

0-iv

Notes

1-v

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Blade Module Features....................................................................1-2

Processors..............................................................................................1-2

Memory...................................................................................................1-2

Storage....................................................................................................1-3

RAID .......................................................................................................1-3

Density....................................................................................................1-3

1-4 Contacting Supermicro.....................................................................1-5

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements......................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area.......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning.........................................................................2-14

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing Blade Modules..................................................................3-1

Powering Up a Blade Unit.......................................................................3-1

Powering Down a Blade Unit ..................................................................3-1

Removing a Blade Unit from the Enclosure............................................3-2

Removing/Replacing the Blade Cover....................................................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Processor Installation.......................................................................3-4

SBI-7127R-SH Blade Module User’s Manual

1-vi

3-4 Onboard Battery Installation............................................................3-9

3-5 Memory Installation...........................................................................3-9

Populating Memory Slots........................................................................3-9

DIMM Installation ..................................................................................3-11

3-6 Hard Disk Drive Installation...........................................................3-12

3-7 Installing the PCI-E Add-on Card .................................................3-13

3-8 Installing the Operating System....................................................3-15

Installing with an External USB CD-ROM Drive....................................3-15

Installing via PXE Boot..........................................................................3-15

Installing via Virtual Media (Drive Redirection) .....................................3-16

3-9 Management Software...................................................................3-17

3-10 Configuring and Setting up RAID...............................................3-17

Chapter 4 Blade Module Features..............................................4-1

4-1 Control Panel.....................................................................................4-2

Power Button ..........................................................................................4-3

KVM Button.............................................................................................4-3

LED Indicators ........................................................................................4-3

KVM Connector.......................................................................................4-3

4-2 Mainboard...........................................................................................4-4

Jumpers..................................................................................................4-6

CMOS Clear............................................................................................4-6

4-3 Blade Unit Components...................................................................4-7

Memory Support .....................................................................................4-8

Hard Disk Drives.....................................................................................4-8

Chapter 5 BIOS.......................................................................................5-1

5-1 Introduction.........................................................................................5-1

System BIOS ..........................................................................................5-1

How To Change the Configuration Data .................................................5-1

Starting the Setup Utility..........................................................................5-1

5-2 BIOS Updates....................................................................................5-2

Flashing BIOS.........................................................................................5-2

5-3 Running Setup...................................................................................5-3

5-4 Main BIOS Setup...............................................................................5-4

5-5 Advanced Setup................................................................................5-6

5-6 Event Logs Setup............................................................................5-15

5-7 IPMI Setup........................................................................................5-16

1-vii

5-8 Boot...................................................................................................5-17

5-9 Security.............................................................................................5-17

5-10 Save & Exit.....................................................................................5-18

Appendix A AMI UEFI BIOS POST Codes..............................A-1

A-1 Checkpoint Ranges..........................................................................A-1

A-2 Standard Checkpoints......................................................................A-2

A-3 OEM-Reserved Checkpoint Ranges .............................................A-9

SBI-7127R-SH Blade Module User’s Manual

1-viii

Notes

1-1

Chapter 1

Introduction

1-1 Overview

This user’s manual covers the SBI-7127R-SH blade module. This blade module is a

compact self-contained server that connects into a pre-cabled enclosure that provides

power, cooling, management and networking functions. One enclosure for the

SBI-7127R-SH blade module can hold ten blade units.

In this manual, “blade system” refers to the entire system (including the enclosure and

blades units), “blade” or “blade unit” refers to a single blade module and “blade

enclosure” is the chassis that the blades, power supplies and modules are housed

within.

Please refer to our web site for information on operating systems that have been

certified for use with the SuperBlade (www.supermicro.com/products/superblade/).

Note: For your system to work properley, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

SMCI product manuals: http://www.supermicro.com/support/manuals/

Product drivers and utilities: ftp://ftp.supermicro.com

Product safety information: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

1-2 Product Checklist of Typical Components

Your blade module ships with its B9DRP mainboard already installed in its chassis.

Memory, hard disk drives and the CPU must all be installed by the user after shipment.

See Chapter 3: "Setup and Installation" on page 3-1 for details on installation of these

components.

Aside from the blade module unit itself, the following optional Mezzanine add-on cards

(with 10GbE or Infiniband Switch) may be ordered for your blade module:

• AOC-XEH-iN2

• AOC-IBH-XDD

• AOC-IBH-XQD

• AOC-IBH-XQS

• AOC-IBH-XDS

See the Supermicro website and the SuperBlade Network Modules User’s Manual on

your SuperBlade system’s CD-ROM for more details on these add-on cards.

SBI-7127R-SH Blade Module User’s Manual

1-2

1-3 Blade Module Features

Table 1-1 lists the main features of the SBI-7127R-SH blade module. See the

proceeding section for components typically included in a blade system and other

optional components. Specific details for the SBI-7127R-SH blade module are found in

Chapter 4: "Blade Module Features" on page 4-1.

Processors

The SBI-7127R-SH blade module supports dual 2011-pin Socket R (LGA 2011) E5-2600

series processors.

Refer to the Supermicro web site for a complete listing of supported processors (http://

www.supermicro.com/products/superblade). Please note that you will need to check the

detailed specifications of a particular blade module for a list of the CPUs it supports.

Details on installation of the processor into the SBI-7127R-SH blade module are found

in Chapter 3: "Setup and Installation" on page 3-1.

Memory

Both the SBI-7127R-SH blade module have sixteen (16) 240-pin DIMM sockets that can

support up to 512 GB RDIMM or 128 GB UDIMM of DDR3 1600/1333/1066/800 MHz

speed, 32GB, 16GB, 8GB, 4GB, 2GB and 1GB size SDRAM memory. Memory is

interleaved, which requires modules of the same size and speed to be installed in

groups (of two or three).

Please refer to the Supermicro web site for a list of supported memory

(www.supermicro.com/products/superblade). The detailed specifications for a blade

module will contain a link to a list of recommended memory sizes and manufacturers.

Table 1-1. SBI-7127R-SH Blade Module Specification Features

Mainboard B9DRP (proprietary form factor)

Chassis Dimensions (HxWxD): 11.32" x 1.67" x 18.9" (288mm x 42.4mm x

480mm)

Processors Eight/six/four core Intel™Xeon®E5-2600 series 2011-pin processors.

Please refer to our web site for a complete listing of supported processors.

FSB Speed QPI up to 8 GT/s

Chipset Intel C602J

Graphics Controller Integrated Matrox G200 Graphics

BIOS 16 MB SPI Flash EEPROM with AMI® BIOS

Memory Capacity Supports up to 512 GB of RDIMM and 128 GB UDIMM SDRAM memory of

DDR3 1600/1333/1066/800 MHz speed and 32GB, 16GB, 8GB, 4GB,2GB

and 1GB size in sixteen (16) 240-pin DIMM sockets

HDD Controller Mezzanine card slot supports controller card

Hard Drive Bays Includes two hot-swap drive bays for 2.5" SATA/SAS/SSD disk drives

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro SuperServer 110T-M Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E200-12D-10C Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-620P-1C3N Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-12C Bedienungsanleitung

Supermicro

Supermicro AS-1114CS-TNR Bedienungsanleitung

Supermicro

Supermicro A+ AS -2114GT-DNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8016B-TF Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SYS-521C-NR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019C-FHTN8 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBA-4119SG Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 6027TR-DTRF+ Bedienungsanleitung

Supermicro

Supermicro 7045B-3 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro Altus 1804i Kurzanleitung

Supermicro

Supermicro SUPERSERVER 2026T-DE2R24L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5014C-MF 5014C-MF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FN5T Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-T Bedienungsanleitung

Supermicro

Supermicro AS-1020A-8 Bedienungsanleitung

Supermicro

Supermicro 5018D-FN4T Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung