Supermicro SUPERSERVER 5018D-MTLN4F Bedienungsanleitung

SUPERSERVER®

5018D-MTLN4F

USER’S MANUAL

1.0a

Проконсультироваться икупить данное оборудование вы можете вкомпании «АНД-Системс»

адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: [email protected]

При обращении используйте промокод AND-PDF иполучите скидку.

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: October 7, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5018D-MTLN4F.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018D-MTLN4F is a high-end server based on the SC813MTQ-

350CB 1U rackmount chassis and the Super X10SLM+-LN4F single processor

motherboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10SLM+-LN4F motherboard

and the SC813MTQ-350CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018D-

MTLN4F into a rack and check out the server conguration prior to powering up the

system. If your server was ordered without processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018D-MTLN4F.

SUPERSERVER 5018D-MTLN4F User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X10SLM+-LN4F motherboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconguring the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC813MTQ-350CB server chas-

sis. You should follow the procedures given in this chapter when installing, removing

or reconguring SATA or peripheral drives and when replacing system power supply

modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

I/O Ports.......................................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Rear Inner Rails ........................................................................ 2-4

Installing the Rack Rails ................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

SUPERSERVER 5018D-MTLN4F User's Manual

vii

Table of Contents

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing an LGA1150 Processor.................................................................... 5-2

Installing a Passive CPU Heatsink ................................................................. 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-7

Connecting Data Cables ................................................................................. 5-7

Connecting Power Cables .............................................................................. 5-7

Connecting the Control Panel......................................................................... 5-7

5-4 I/O Ports.......................................................................................................... 5-8

5-5 Installing Memory............................................................................................ 5-9

viii

SUPERSERVER 5018D-MTLN4F User's Manual

Memory Population Guidelines ..................................................................... 5-10

5-6 Adding PCI Cards ..........................................................................................5-11

5-7 Motherboard Details...................................................................................... 5-12

X10SLM+-LN4F Quick Reference ................................................................ 5-12

5-8 Connector Denitions ................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-20

5-10 Onboard Indicators........................................................................................ 5-23

5-11 SATA Drive Connections ............................................................................... 5-24

5-12 Installing Software......................................................................................... 5-25

SuperDoctor III.............................................................................................. 5-26

5-13 Onboard Battery............................................................................................ 5-27

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-3

Removing the Front Bezel .............................................................................. 6-3

SATA Drive Installation.................................................................................... 6-4

Accessing the Drive Bays ............................................................................... 6-4

SATA Backplane.............................................................................................. 6-5

6-5 Power Supply.................................................................................................. 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-23

7-5 IPMI............................................................................................................... 7-25

7-6 Boot Settings................................................................................................. 7-28

7-7 Security Settings ........................................................................................... 7-30

7-8 Save & Exit ................................................................................................... 7-31

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Chapter 1

Introduction

1-1 Overview

The SuperServer 5018D-MTLN4F is a high-end server comprised of two main sub-

systems: the SC813MTQ-350CB 1U server chassis and the X10SLM+-LN4F single

processor motherboard. Please refer to our web site for information on operating

systems that have been certied for use with the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5018D-MTLN4F, as listed below:

• Four 4-cm fans (FAN-0065L4)

• One passive CPU heatsink (SNK-P0046P)

• One riser card for one PCI-E 3.0 x16 PCI add-on card (RSC-RR1U-E16)

• Four hard drive trays (MCP-220-00093-0B)

• One rackmount kit (CSE-PT52)

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5018D-MTLN4F User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 5018D-MTLN4F lies the X10SLM+-LN4F, a single

processor motherboard based on the Intel® C224 chipset. Below are the main

features of the X10SLM+-LN4F (see Figure 1-1 for a block diagram of the chipset).

Processors

The X10SLM+-LN4F supports a single Intel Xeon E3-1200 v3/v4 and 4th Generation

Core i3, Pentium, Celeron processors in an H3 (LGA1150) socket. Please refer to

the motherboard description pages on our web site for a complete listing of sup-

ported processors.

Memory

The X10SLM+-LN4F has four DIMM sockets that can support up to 32 GB of Un-

buffered ECC DDR3-1600/1333 memory. Please refer to Chapter 5 for installing

memory.

Serial ATA

An on-chip SATA controller is integrated into the X10SLM+-LN4F to provide four

SATA 3.0 (6 Gb/s) ports and two SATA 2.0 (3 Gb/s) ports.

I/O Ports

The rear I/O ports include one COM port, a VGA (monitor) port, four USB 2.0 ports,

and four gigabit Ethernet ports. A dedicated IPMI LAN port is also included.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SBI-7428R-C3 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER E102-9AP-L Bedienungsanleitung

Supermicro

Supermicro SuperServer E302 Series Bedienungsanleitung

Supermicro

Supermicro SSG-2029P-ACR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MD-H8TRF Bedienungsanleitung

Supermicro

Supermicro SC829TQ-R920LPB Bedienungsanleitung

Supermicro

Supermicro X13SET-G Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-421GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220HE-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018U-TR4+ Bedienungsanleitung

Supermicro

Supermicro SBI-7126T-SH Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN12RV-NEBS Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013A-T Bedienungsanleitung

Supermicro

Supermicro ASG-1014S-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014L-M4 Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem 6048R-E1CR45H Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer 6049P-E1CR45H Bedienungsanleitung

Supermicro

Supermicro SUPERO SuperServer 1018L-MP Bedienungsanleitung

Supermicro

Supermicro SC116AC2-R706WB Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GP-DNR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung