Supermicro Supero SUPERSERVER 5086B-TRF Bedienungsanleitung

SUPERSERVER

5086B-TRF

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: July 26, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 5086B-TRF. Instal-

lation and maintainance should be performed by experienced technicians only.

The SuperServer 5086B-TRF is a high-density, 5U 8-way server solution housed

in the SC758 rackmount chassis. It is built around one X8OBN-F baseboard, four

processor (CPU) boards (X8OBN-CPU) and two bridge boards (X8OBN-BR1).

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X8OBN-F and the SC758

chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5086B-TRF

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panels on the chassis as well the HDD carrier

LEDs.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5086B-TRF.

SUPERSERVER 5086B-TRF User's Manual

Chapter 5: Advanced Setup

Chapter 5 provides detailed information on the X8OBN-F baseboard as well as

the CPU boards (X8OBN-CPU) and bridge boards (X8OBN-BR1, and includes the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC758 server chassis. You

should follow the procedures given in this chapter when installing, removing or

reconﬁguring SATA or peripheral drives and when replacing system power supply

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Baseboard and CPU Board Features ............................................................. 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SATA .............................................................................................................. 1-2

PCI Expansion Slots ....................................................................................... 1-2

Rear Chassis Ports ......................................................................................... 1-2

Graphics Controller ......................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-4

System Power ................................................................................................. 1-4

Hard Drives ..................................................................................................... 1-4

Front Control Panel......................................................................................... 1-4

Cooling System ............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails..................................................... 2-4

Locking Tabs ................................................................................................... 2-5

Releasing the Inner Rail ................................................................................. 2-5

Installing The Inner Rails on the Chassis....................................................... 2-6

Installing the Outer Rails on the Rack............................................................ 2-7

Optional Quick Installation Method ................................................................. 2-9

SUPERSERVER 5086B-TRF User's Manual

vii

2-5 Checking the Conﬁguration........................................................................... 2-10

2-6 Checking the Drive Bay Setup.......................................................................2-11

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-1

Power Fail ....................................................................................................... 3-2

Overheat/Fan Fail: .......................................................................................... 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Setup

5-1 Handling the Baseboard ................................................................................. 5-1

Precautions ..................................................................................................... 5-1

5-2 Component Installation ................................................................................... 5-2

Removing a Bridge Module from the Chassis ................................................ 5-2

Removing a CPU Module from the Chassis................................................... 5-2

Removing an Air Shroud from a CPU Module................................................ 5-3

Installing a CPU Heatsink to the CPU............................................................ 5-4

Installing a CPU to the CPU Board ................................................................ 5-4

Installing Memory on the CPU Board ............................................................. 5-5

Memory Support......................................................................................... 5-5

Installing a CPU Board to the Baseboard....................................................... 5-7

Installing a Bridge Module .............................................................................. 5-8

5-3 Installing PCI Add-On Cards........................................................................... 5-9

5-4 Baseboard Details......................................................................................... 5-10

5-5 Connector Deﬁnitions ................................................................................... 5-12

Front Control Panel....................................................................................... 5-12

5-6 Jumper Settings ............................................................................................ 5-17

Table of Contents

viii

5-7 Onboard Indicators........................................................................................ 5-20

5-8 I/O Ports ........................................................................................................ 5-21

5-9 Serial ATA Connections................................................................................. 5-21

5-10 Installing Software......................................................................................... 5-22

SuperDoctor III .............................................................................................. 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Installing the Baseboard into the Chassis ...................................................... 6-3

Tools Needed .................................................................................................. 6-3

6-4 System Fans ................................................................................................... 6-4

Replacing Fans ............................................................................................... 6-4

6-5 Drive Bay Installation/Removal ....................................................................... 6-6

Accessing the Drive Bays ............................................................................... 6-6

Hard Drive Midplane ....................................................................................... 6-6

SATA Drive Installation.................................................................................... 6-6

6-6 Power Supply .................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Replacing the Power Supply........................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conﬁguration Data ......................................................... 7-1

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup ...................................................................................................... 7-2

7-3 Advanced Setup Conﬁguration ....................................................................... 7-4

7-4 Chipset .......................................................................................................... 7-18

7-5 Server Management...................................................................................... 7-25

7-6 iSCSI ............................................................................................................. 7-27

7-7 Boot Conﬁguration ........................................................................................ 7-28

7-8 Security ......................................................................................................... 7-29

7-9 Save & Exit ................................................................................................... 7-30

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSERVER 5086B-TRF User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 5086B-TRF is a high-density SuperServer comprised of several

subsystems: the SC758 chassis, one X8OBN-F baseboard, four X8OBN-CPU pro-

cessor boards and two X8OBN-BR1 bridge boards. Please refer to our web site for

information on operating systems that have been certiﬁed for use with the system

(www.supermicro.com).

Below is a list of the main hardware components included with the 5086B-TRF:

Eight passive CPU heatsinks (SNK-P0044P+)

•

Four air shrouds (MCP-310-75801-0N)•

Four 9-cm system fans (FAN-0121L4)•

Two 9-cm exhaust fans (FAN-0122L4)•

SATA Accessories•

One HDD backplane (BPN-SAS-I28A)

Sixteen 2.5" hard drive carriers (MCP-220-97301-0B)

One set of rackmount hardware (MCP-290-00057-0N)

•

One CD containing drivers and utilities•

5086B-TRF User's Manual•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5086B-TRF User's Manual

1-2 Baseboard and CPU Board Features

The 5086B-TRF is built around an X8OBN-F baseboard. Four X8OBN-CPU pro-

cessor boards (linked together with two X8OBN-BR1 bridge boards) plug into the

X8OBN-F baseboard. The X8OBN-F is based on the Intel® 7500 chipset (+ ICH10).

Below are the main features of the X8OBN-F. (See Figure 1-1 for a block diagram

of the chipset.)

Processors

Each X8OBN-CPU processor board supports single or dual Intel® Xeon 7500 Series

8-core processors and next generation Xeon E7 8800 family 10-core processors.

Please refer to the product page on our web site for a complete listing of supported

processors (www.supermicro.com).

Memory

The four X8OBN-CPU boards in the system have a total of 64 DIMM slots that

can support up to 2 TB of ECC registered DDR3-1333/1066/978/800 SDRAM. See

Chapter 5 for details.

SATA

The ICH10R portion of the chipset provides 3 Gbps SATA support over six ports. A

total of 16 SAS hot-swap drives are supported. Notes: The operating system you

use must have RAID support to enable the hot-swap capability and RAID func-

tion of the SAS drives. RAID 0, 1, 5 and 10 are supported (RAID 5 supported in

Windows only).

PCI Expansion Slots

The X8OBN-F can support four PCI-E 2.0 x16 and two PCI-E 2.0 x8 (in x16 slots)

or 10 PCI-E 2.0 x8 standard size add-on cards.

Rear Chassis Ports

The rear of the chassis includes one keyboard and mouse ports, two USB ports, a

COM port, a VGA port and three 1 Ethernet (LAN) ports.

Graphics Controller

The X8OBN-F features an integrated Matrox G200eW video controller. The G200eW

is a 2D/3D/video accelerator chip with a 128-bit core.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperBlade SBI-621E-1C3N Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2048U-RTR4 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7125W-S6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029UZ-TN20R25M Bedienungsanleitung

Supermicro

Supermicro SuperServer 621H-TN12R Bedienungsanleitung

Supermicro

Supermicro 1012A-MTF Bedienungsanleitung

Supermicro

Supermicro SBA-7121M-T1 Handbuch

Supermicro

Supermicro SYS-F629P3-RTB Betriebsanleitung

Supermicro

Supermicro SuperServer 5019C-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 610U-TNR Bedienungsanleitung

Supermicro

Supermicro AS-2114S-WN24RT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 5037C-i Bedienungsanleitung

Supermicro

Supermicro 7045B-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019S-M2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6036ST-6LR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5028TK-HTTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019P-WT Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8C Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8045C-3R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-NT Bedienungsanleitung

Supermicro

Supermicro AS-1011M-T2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1028GR-TR Bedienungsanleitung

Supermicro

Supermicro AS-2113S-WN24RT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung