Supermicro SUPER SUPERSERVER 6027PR-HTR Bedienungsanleitung

SUPER ®

USER’S MANUAL

Revision 1.0

SUPERSERVER®

6027PR-HTR

6027PR-HTTR

6027PR-HTFR

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: November 18, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the server. Installation and

maintainance should be performed by experienced technicians only.

Please refer to the server specications page on our Web site for updates on

supported memory, processors and operating systems (http://www.supermicro.

com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 6027PR-HT(R/TR/FR) Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SATA................................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-3

Onboard Controllers........................................................................................ 1-3

Input/Output Ports .......................................................................................... 1-3

InniBand (6027PR-HTFR only) ..................................................................... 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

SATA Subsystem............................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

Cooling System............................................................................................... 1-4

Air Shrouds ..................................................................................................... 1-4

Mounting Rails ................................................................................................ 1-4

1-4 Advanced Power Management....................................................................... 1-5

Intel Intelligent Power Node Manager ........................................................... 1-5

Manageability Engine (ME)............................................................................. 1-5

1-5 2U Twin2: System Notes ................................................................................. 1-7

Nodes.............................................................................................................. 1-7

System Power................................................................................................. 1-7

SATA Backplane/Drives................................................................................... 1-7

1-6 Contacting Supermicro.................................................................................... 1-8

Chapter 2 Rack Installation......................................................................2-1

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

General Server Precautions............................................................................ 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Sufcient Airow ......................................................................................... 2-3

Preface

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack .................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing the Inner Rails on the Chassis ........................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Chapter 3 System Interface......................................................................3-1

3-1 Overview ........................................................................................................ 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems ............ 4-1

About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup ................................................5-1

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

5-3 Rear I/O Ports................................................................................................. 5-2

SUPERSERVER 6027PR-HT(R/TR/FR) Manual

5-4 Installing the Processor and Heatsink ............................................................ 5-3

Installing an LGA 2011 Processor................................................................... 5-3

Installing a CPU Heatsink ............................................................................... 5-6

Removing the Heatsink .................................................................................. 5-6

5-5 Installing Memory............................................................................................ 5-7

Memory Support.............................................................................................. 5-7

Maximum Memory........................................................................................... 5-8

5-6 Adding PCI Expansion Cards ........................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

5-8 Connector Denitions.................................................................................... 5-15

5-9 Jumper Settings ............................................................................................ 5-19

Explanation of Jumpers ................................................................................ 5-19

5-10 Onboard Indicators........................................................................................ 5-22

5-11 PCI-Express and Serial ATA Connections .................................................... 5-24

5-12 Installing Software......................................................................................... 5-25

SuperDoctor 5............................................................................................... 5-26

5-13 Serverboard Battery...................................................................................... 5-28

Chapter 6 Advanced Chassis Setup........................................................6-1

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Chassis Cover................................................................................................. 6-3

6-4 Air Shrouds ..................................................................................................... 6-4

6-5 Checking the Airow ....................................................................................... 6-5

6-6 System Fans ................................................................................................... 6-5

Optional Fan Congurations ........................................................................... 6-5

6-7 Removing and Installing the Backplane.......................................................... 6-8

Removing the Backplane ................................................................................ 6-8

Installing the Backplane................................................................................ 6-10

6-8 Installing the Serverboard ..............................................................................6-11

I/O Shield .......................................................................................................6-11

Permanent and Optional Standoffs................................................................6-11

6-9 Adapter Card Replacement........................................................................... 6-12

6-10 Expansion Slot Setup.................................................................................... 6-14

6-11 Drive Bay Installation/Removal ..................................................................... 6-15

Accessing the Drive Bays ............................................................................. 6-15

6-12 Power Supply................................................................................................ 6-19

Power Supply Replacement.......................................................................... 6-19

Preface

Chapter 7 BIOS .........................................................................................7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

Starting the Setup Utility ................................................................................. 7-2

7-1 Main Setup...................................................................................................... 7-2

7-2 Advanced Setup Congurations...................................................................... 7-4

7-3 Event Logs .................................................................................................... 7-28

7-4 IPMI............................................................................................................... 7-30

7-5 Boot............................................................................................................... 7-32

7-6 Security......................................................................................................... 7-34

7-7 Save & Exit ................................................................................................... 7-35

Appendix A BIOS Error Beep Codes ..................................................... A-1

Appendix B System Specications ........................................................ B-1

SUPERSERVER 6027PR-HT(R/TR/FR) Manual

Notes

Chapter 1

Introduction

1-1 Overview

The SuperServer 6027PR-HT(R/TR/FR) is a high-end server comprised of two main

subsystems: the SC827HQ+-R2K02B 2U server chassis and a X9DRT-P/PT/PIBF

dual processor serverboard in each of four hot-swap computing nodes. Refer to

our web site for information on operating systems that have been certied for use

with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components are

included, as listed below:

•Heat Sinks

Four (4) 1U passive front CPU heat sinks CPU (SNK-P0047PSM)

Four (4) 1U passive CPU heat sinks with narrow ILM MB(SNK-P0057PS)

•Four (4) mylar air shrouds (MCP-310-21702-0B)

•Four (4) 80x80x38mm cooling fans (FAN-0136L4)

•SATA/SAS Backplane

Four (4) SAS3 HD expansion cards (BPN-ADP-S3008L-L6IP)

One (1) SAS Backplane for 12 3.5" HDD (BPN-SAS3-827HQ)

Twelve (12) hot-swap 3.5" HDD trays (MCP-220-00075-0B)

•Four (4) Riser cards (RSC-R1UTP-E16R)

•One (1) Rails set (MCP-290-00053-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety information:

http://super-dev/about/policies/safety_information.cfm

If you have any questions, contact [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6027PR-HT(R/TR/FR) USER'S MANUAL

1-2 Serverboard Features

In each of the four computing nodes lies an X9DRT-P/PT/PIBF, a dual processor

serverboard based on the Intel C602 chipset and designed to provide maximum

performance.

•The 6027PR-HTR uses the X9DRT-P serverboard with 1Gb network speed.

•The 6027PR-HTTR uses the X9DRT-PT serverboard with 10Gb network speed.

•The 6027PR-HTFR uses the X9DRT-PIBF serverboard with Inniband.

The sections below cover the main features. Refer to the Supermicro web site for

updated specications and details. (see Figure 1-1 for a block diagram).

Processors

Each serverboard supports single or dual Intel Xeon E5-2600 series processors

(Socket R LGA 2011).

Memory

Each serverboard has sixteen DIMM slots.

•Up to 1TB DDR3 ECC LRDIMM

•Up to 512GB DDR3 ECC RDIMM

•Up to 128GB DDR3 ECC/non-ECC UDIMM

Supported memory types are1866/1600/1333/1066/800MHz* ECC SDRAM 72-bit,

240-pin gold-plated DIMMs. Accepted sizes are 32GB, 16GB, 8GB, 4GB, 2GB,

1GB, and 64GB LRDIMM.

SATA

For each serverboard supports SATA3 (6Gbps) or SATA2 (3Gbps). RAID 0, 1 or 10

are supported and the drives are hot-swappable.

Note: Your operating system must have RAID support to enable the hotswap

capability and RAID function of the drives.

PCI Expansion Slots

Each node offers one PCI-E 3.0 x16 low-prole slot, and one Zero Slot expansion

position, for a 10 Gb LAN card.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer ARS-110M-NR Bedienungsanleitung

Supermicro

Supermicro 6027AX-TRF-HFT2 Bedienungsanleitung

Supermicro

Supermicro ASG-1115S-NE316R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-530MT-H8TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5025M-UR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741GE-TNRT Bedienungsanleitung

Supermicro

Supermicro AS-1023US-TR4 Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NEL32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5017R-iHDP Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2015CS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FTN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6026TT-HTRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029U-TR25M Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110A-16C-RN10SP Bedienungsanleitung

Supermicro

Supermicro SYS-521C-NR Bedienungsanleitung

Supermicro

Supermicro 6028R-WTR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-4MU32JBF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8016B-TLF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung