Supermicro SUPERSERVER 1015B-M3 Bedienungsanleitung

SUPER

USER’S MANUAL

Revision 1.0

SUPERSERVER 1015B-M3

Manual Revision 1.0

Release Date: September 26, 2008

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDINGTHE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 1015B-M3. Instal-

lation and maintainance should be performed by experienced technicians only.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7SB3 motherboard

and the SC113MTS-560C chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 1015B-M3 into

a rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1015B-M3.

iii

Preface

SUPERSERVER 1015B-M3 User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X7SB3 motherboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC113MTS-560C 1U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring SAS/SATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: POST Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

SUPERSERVER 1015B-M3 User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processor........................................................................................................1-2

Memory ...........................................................................................................1-2

Onboard SAS..................................................................................................1-2

Onboard SATA................................................................................................. 1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power.................................................................................................1-4

SAS/SATA Subsystem.....................................................................................1-4

Control Panel .................................................................................................. 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................ 2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Inner Rails.......................................................................................................2-5

Outer Rails......................................................................................................2-6

Installing the Server into a Telco Rack...........................................................2-9

2-5 Checking the Serverboard Setup.................................................................. 2-10

vii

Table of Contents

2-6 Checking the Drive Bay Setup.......................................................................2-11

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset...............................................................................................................3-1

Power..............................................................................................................3-1

UID..................................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Universal Information LED.............................................................................. 3-2

NIC2................................................................................................................3-3

NIC1................................................................................................................3-3

HDD................................................................................................................. 3-3

Power..............................................................................................................3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-4

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions.............................................................................................4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports..........................................................................................................5-4

5-5 Installing the Processors and Heatsinks.........................................................5-5

5-6 Installing Memory............................................................................................5-8

Memory Support..............................................................................................5-8

5-7 PCI Expansion Cards.................................................................................... 5-10

5-8 Serverboard Details .......................................................................................5-11

X7SB3 Quick Reference............................................................................... 5-12

5-9 Connector Deﬁnitions ...................................................................................5-13

Main ATX Power Supply Connector......................................................... 5-13

Secondary Power Connector ...................................................................5-13

viii

SUPERSERVER 1015B-M3 User's Manual

Power Button............................................................................................ 5-13

Reset Button............................................................................................. 5-13

Power Fail LED .......................................................................................5-13

Overheat/Fan Fail LED (OH)....................................................................5-14

NIC2 (JLAN2) LED................................................................................... 5-14

NIC1 (JLAN1) LED................................................................................... 5-14

HDD LED.................................................................................................. 5-14

Power On LED......................................................................................... 5-14

NMI Button ............................................................................................... 5-15

Fan Headers............................................................................................. 5-15

ATX PS/2 Keyboard and PS/2 Mouse Ports............................................ 5-15

Serial Ports............................................................................................... 5-15

Chassis Intrusion...................................................................................... 5-16

Wake-On-LAN .......................................................................................... 5-16

Wake-On-Ring..........................................................................................5-16

External Speaker/Internal Buzzer.............................................................5-16

LAN1/2 (Ethernet Ports) ..........................................................................5-16

Universal Serial Bus (USB)...................................................................... 5-17

SGPIO Headers ....................................................................................... 5-17

Power Supply SMBus Header..................................................................5-17

Onboard Power LED................................................................................ 5-17

Redundant Power Supply Fail ................................................................. 5-18

Alarm Reset.............................................................................................. 5-18

I-Button.....................................................................................................5-18

5-10 Jumper Settings............................................................................................ 5-19

Explanation of Jumpers............................................................................5-19

CMOS Clear.............................................................................................5-19

VGA Enable/Disable................................................................................. 5-19

LAN1/2 Enable/Disable ........................................................................... 5-20

Watch Dog Enable/Disable ...................................................................... 5-20

USB Wake-Up .........................................................................................5-20

SMBus to PCI Slots .................................................................................5-21

SAS Enable/Disable................................................................................. 5-21

SAS RAID Mode Select...........................................................................5-21

Power Force On....................................................................................... 5-21

5-11 Onboard Indicators........................................................................................5-22

LAN1/2 LEDs............................................................................................ 5-22

Onboard Power LED (LE1)...................................................................... 5-22

SAS Activity LED .....................................................................................5-22

SAS Heartbeat LED ................................................................................ 5-22

5-12 Floppy, SATA and SAS Ports........................................................................ 5-23

Floppy Drive Connector ...........................................................................5-23

SATA Ports ............................................................................................... 5-23

SAS Ports................................................................................................. 5-23

5-13 Installing Software......................................................................................... 5-24

Supero Doctor III........................................................................................... 5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Cooling...............................................................................................6-2

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-4

Accessing the Drive Bays............................................................................... 6-4

Hard Drive Installation.....................................................................................6-4

DVD Drive Installation..................................................................................... 6-6

6-5 Power Supply..................................................................................................6-7

Power Supply Failure...................................................................................... 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

System BIOS................................................................................................... 7-1

How To Change the Conﬁguration Data.........................................................7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup............................................................................................ 7-2

Main BIOS Setup Menu.................................................................................. 7-3

Main Setup Features..................................................................................7-3

7-4 Advanced Setup..............................................................................................7-6

7-5 Security Settings........................................................................................... 7-20

7-6 Boot Settings................................................................................................. 7-21

7-7 Exit ................................................................................................................ 7-22

Appendix A POST Error Beep Codes

Appendix B System Speciﬁcations

Table of Contents

Notes

SUPERSERVER 1015B-M3 User's Manual

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro TwinPro 1029TP-DTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-FTN10P Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029P-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022P-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 4029GP-TVRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 110T-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 620BT-DNTR Bedienungsanleitung

Supermicro

Supermicro AS-511E-WR Montageanleitung

Supermicro

Supermicro 2028UT-BC1NRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-4CN10P Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9C Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221HE-FTNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029GP-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221GE-NR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019S-WR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung