Supermicro SUPERSERVER 2028TR-HTR Bedienungsanleitung

USER’S MANUAL

1.0b

SUPERSERVER®

2028TR-HTR

2028TR-HTFR

2028TR-H72R

2028TR-H72FR

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: May 7, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

2028TR-HTR/HTFR/H72R/H72FR. Installation and maintainance should be

performed by experienced technicians only.

The SuperServer 2028TR-HTR/HTFR/H72R/H72FR is a high-end server based

on the SC217HQ-R1K68BP 2U rackmount chassis and the dual processor

X10DRT-H/HIBF serverboard. All models have four serverboard nodes with six

hot-swap Hard Disk Drives (HDDs) each per node.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRT-H/HIBF serverboard

and the SC217HQ-R1K68BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

2028TR-HTR/HTFR/H72R/H72FR into a rack and check out the server conguration

prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 2028TR-HTR/HTFR/H72R/H72FR.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRT-H/HIBF serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconguring the serverboard.

SUPERSERVER 2028TR-HTR/HTFR/H72R/H72FR User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC217HQ-R1K68BP server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconguring SATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processor ........................................................................................................ 1-2

Memory ........................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

Cooling System............................................................................................... 1-4

Air Shrouds ..................................................................................................... 1-4

Mounting Rails ................................................................................................ 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

1-6 2U Twin2: System Notes ................................................................................. 1-6

Nodes.............................................................................................................. 1-6

System Power................................................................................................. 1-6

Hard Drive Backplane/Drives.......................................................................... 1-6

Adapter Cards................................................................................................. 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Locking Tabs ................................................................................................... 2-5

Releasing the Inner Rail ................................................................................. 2-5

SUPERSERVER 2028TR-HTR/HTFR/H72R/H72FR User's Manual

vii

Installing The Inner Rails on the Chassis....................................................... 2-6

Installing the Outer Rails on the Rack............................................................ 2-7

Standard Chassis Installation ......................................................................... 2-8

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button....................................................................................... 3-2

Power .............................................................................................................. 3-2

UID .................................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Alert................................................................................................................. 3-2

NIC .................................................................................................................. 3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Processor and Heatsink Installation................................................................ 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink................................................................................... 5-8

5-5 Installing Memory............................................................................................ 5-9

Memory Support.............................................................................................. 5-9

5-6 Adding PCI Expansion Cards ........................................................................5-11

Table of Contents

viii

5-7 Serverboard Details ...................................................................................... 5-12

X10DRT-H/HIBF Quick Reference................................................................ 5-12

5-8 Connector Denitions.................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-17

Explanation of Jumpers ................................................................................ 5-17

5-10 Onboard Indicators........................................................................................ 5-20

5-11 PCI-Express and SATA Connections ............................................................ 5-22

5-12 Installing Software......................................................................................... 5-23

SuperDoctor® 5 ............................................................................................ 5-24

5-13 Onboard Battery............................................................................................ 5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Front and Rear Views ..................................................................................... 6-2

6-3 Chassis Cover................................................................................................. 6-3

6-4 Air Shrouds ..................................................................................................... 6-4

6-5 System Fans ................................................................................................... 6-5

Checking the Airow ....................................................................................... 6-6

6-6 Replacing the Backplane ................................................................................ 6-7

Removing the Backplane ................................................................................ 6-7

Installing the Backplane.................................................................................. 6-9

6-7 Installing the Serverboard ............................................................................. 6-10

I/O Shield ...................................................................................................... 6-10

Permanent and Optional Standoffs............................................................... 6-10

Installing the Adapter Card ........................................................................... 6-12

6-8 Adding Expansion Cards .............................................................................. 6-13

6-9 Installing and Removing Hard Drives ........................................................... 6-15

6-10 Power Supply................................................................................................ 6-18

Power Supply Replacement.......................................................................... 6-18

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-30

7-5 IPMI............................................................................................................... 7-32

SUPERSERVER 2028TR-HTR/HTFR/H72R/H72FR User's Manual

7-6 Security Settings ........................................................................................... 7-34

7-7 Boot Settings................................................................................................. 7-35

7-8 Save & Exit ................................................................................................... 7-37

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Table of Contents

Notes

SUPERSERVER 2028TR-HTR/HTFR/H72R/H72FR User's Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6028TP-HC0R Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer 1029P-NES32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510P-M Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029UX-LL1-S16 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1018R-WR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7125B-T1 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 5086B-TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-6029U-T Series Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-110D-4C-FRAN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NEL32R Bedienungsanleitung

Supermicro

Supermicro SERIES3800/S120T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-TDW Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-MT Bedienungsanleitung

Supermicro

Supermicro 5018D2-AR12L Bedienungsanleitung

Supermicro

Supermicro 6018R-WTR Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2015HS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015A-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-FRN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN10RT Bedienungsanleitung

Supermicro

Supermicro 2028UT-BC1NRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620TP-HC8TR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung