Supermicro SUPERSERVER 5018R-WR Bedienungsanleitung

SUPERSERVER®

5018R-WR

USER’S MANUAL

1.0b

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0b

Release Date: June 27, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5018R-WR.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018R-WR is a high-end server based on the SC815TQ-R500WB

chassis and the X10SRW-F motherboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10SRW-F motherboard and

the SC815TQ-R500WB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018R-WR

into a rack and check out the server conguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018R-WR.

SUPERSERVER 5018R-WR User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X10SRW-F motherboard, including

the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when recong-

uring the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-R500WB server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconguring drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

PCIe Expansion Slots ..................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

Rear I/O Ports................................................................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Inner Rails ................................................................................. 2-4

Installing the Outer Rails................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

SUPERSERVER 5018R-WR User's Manual

vii

UID .................................................................................................................. 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Information LED .............................................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA 2011 Processor................................................................... 5-4

Installing and Removing a Passive CPU Heatsink......................................... 5-6

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

DIMM Installation ............................................................................................ 5-8

Table of Contents

viii

SUPERSERVER 5018R-WR User's Manual

Memory Population Guidelines ....................................................................... 5-9

5-6 Adding PCIe Add-On Cards...........................................................................5-11

5-7 Motherboard Details...................................................................................... 5-12

X10SRW-F Quick Reference ........................................................................ 5-12

5-8 Connector Denitions ................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-20

5-10 Onboard Indicators........................................................................................ 5-22

5-11 SATA Ports .................................................................................................... 5-24

5-12 Installing Software......................................................................................... 5-25

SuperDoctor® 5 ............................................................................................ 5-26

5-13 Onboard Battery............................................................................................ 5-27

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Removing the Front Bezel .............................................................................. 6-4

Accessing the Drive Bays ............................................................................... 6-5

Hard Drive Installation..................................................................................... 6-6

DVD-ROM Drive Installation ........................................................................... 6-8

6-5 Power Supply.................................................................................................. 6-9

Power Supply Failure................................................................................. 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-33

7-5 IPMI............................................................................................................... 7-35

7-6 Security Settings ........................................................................................... 7-38

7-7 Boot Settings................................................................................................. 7-39

7-8 Save & Exit ................................................................................................... 7-41

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Chapter 1

Introduction

1-1 Overview

The SuperServer 5018R-WR is comprised of two main subsystems: the SC815TQ-

R500WB 1U chassis and the X10SRW-F motherboard. Please refer to our website

for information on operating systems that have been certied for use with the system

(www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5018R-WR, as listed below:

• One passive CPU heatsink (SNK-P0047PS)

• Four 8-cm fans (FAN-0086L4)

• One air shroud (MCP-310-19002-0N)

• SATA Accessories

One SATA backplane (BPN-SAS-815TQ-O-P)

Four drive carriers (MCP-220-00075-0B)

• Two riser cards (RSC-R1UW-2E16-O-P, RSC-R1UW-E8R-O-P)

• One rail kit consisting of one set each of outer rails (MCP-290-00101-0N), in-

ner rails (MCP-290-00105-0N) and inner rail extensions (MCP-290-00109-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: https://www.supermicro.com/wftp/driver

• Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

• If you have any questions, please contact our support team at:

[email protected]m

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5018R-WR User's Manual

1-2 Motherboard Features

The SuperServer 5018R-WR is built around the X10SRW-F, a single processor

motherboard based on the Intel®C612 Express chipset. Below are the main features

of the X10SRW-F. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The X10SRW-F supports a single Intel E5-2600/E5-1600 v3/v4 or E5-1600 v3/v4

Series processor in an LGA2011 socket (Socket R3). Please refer to the mother-

board description pages on our website for a complete listing of supported proces-

sors (www.supermicro.com).

Memory

The X10SRW-F has eight DIMM sockets that can support up to 1 TB of ECC 3DS

LRDIMM (Load-Reduced DIMM), 512 GB of ECC LRDIMM or 256 GB of ECC

RDIMM (Registered DIMM) DDR4-2400/2133/1866/1600 memory. See Chapter 5

for details.

PCIe Expansion Slots

Two riser cards (RSC-R1UW-2E16-O-P, RSC-R1UW-E8R-O-P) provided in the

server can support a total of two Gen 3 x16 full-height, full length and one Gen 3

x8 low-prole PCIe cards, respectively. See Chapter 5 Section 6 for details.

Serial ATA

A SATA controller is integrated into the chipset to provide ten SATA 3.0 (6/Gbps)

ports, which are RAID 0, 1, 5 and 10 supported (Windows only). The SATA drives

are hot-swappable units.

Note: two SATA DOM ports are also included on the motherboard.

Rear I/O Ports

Ports on the I/O backplane include a COM port, a VGA port, two USB 3.0 ports,

two USB 2.0 ports, two gigabit Ethernet ports and one dedicated IPMI port. A UID

(Unit Identier) button and LED are also included beside the VGA port.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro X5SS8-GM Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-2029P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-620P-ACR12H Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-C Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-72RF Bedienungsanleitung

Supermicro

Supermicro 1028-WTNR(T) Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022P-i Bedienungsanleitung

Supermicro

Supermicro SuperServer E50-9AP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2029BT-DNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-T2 Bedienungsanleitung

Supermicro

Supermicro SYS-521C-NR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5028TK-HTTR Bedienungsanleitung

Supermicro

Supermicro FatTwin F628G3-FT+ Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-610P-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019P-M Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung