Supermicro SuperServer 5017R-iHDP Bedienungsanleitung

SUPER

SUPERSERVER

5017R-iHDP

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: May 28, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5017R-iHDP.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5017R-iHDP is a 1U rackmount server based on the SC816LTS-

655BP server chassis and the Super X9SCFF-F motherboard. Please refer to our

web site for updates on supported processors.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X9SCFF-F motherboard

and the SC816LTS-655BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5017R-iHDP

into a rack and check out the server conguration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5017R-iHDP.

iii

Preface

SUPERSERVER 5017R-iHDP User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X9SCFF-F motherboard, including

the locations and functions of connectors, headers and jumpers. Refer to this chap-

ter when adding or removing processors or main memory and when reconguring

the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC816LTS-655BP chassis. You

should follow the procedures given in this chapter when installing, removing or

reconguring Serial ATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: POST Error Beep Codes

Appendix B: System Specications

Preface

Notes

SUPERSERVER 5017R-iHDP User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SATA .............................................................................................................. 1-2

PCI Expansion Slots ....................................................................................... 1-2

I/O Ports.......................................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-2

System Power................................................................................................. 1-2

SATA Subsystem............................................................................................. 1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Rear Inner Rails ........................................................................ 2-4

2-5 Rack Mounting Instructions............................................................................. 2-4

Identifying the Inner Rail and Inner Rail Extension ........................................ 2-4

Locking Tabs ................................................................................................... 2-4

vii

Table of Contents

Attaching the Inner Rail .................................................................................. 2-5

Installing the Outer Rails to the Rack............................................................. 2-6

Chassis Installation ......................................................................................... 2-8

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button....................................................................................... 3-1

Power .............................................................................................................. 3-1

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Motherboard Installation.................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

5-4 I/O Ports.......................................................................................................... 5-4

5-5 Processor and Heatsink Installation................................................................ 5-5

Installing an LGA1155 Processor .................................................................. 5-5

Installing a Heatsink........................................................................................ 5-7

5-6 Installing Memory............................................................................................ 5-8

Installing & Removing DIMMs......................................................................... 5-8

Memory Support......................................................................................... 5-9

Populating Memory Slots ........................................................................... 5-9

viii

SUPERSERVER 5017R-iHDP User's Manual

5-8 Motherboard Details...................................................................................... 5-10

X9SCFF-F Quick Reference Table ................................................................5-11

5-9 Connector Denitions ................................................................................... 5-12

Power Headers (JPWR1,JPWR2,J3)....................................................... 5-12

Serial Link Headers (6-SGPIO)................................................................ 5-12

SATA DOM Power (JSD1)........................................................................ 5-12

Chassis Intrusion (JL1) ............................................................................ 5-12

Universal Serial Bus (USB)...................................................................... 5-13

Fan Headers (FAN) .................................................................................. 5-13

Serial Port (COM1)................................................................................... 5-13

Power Supply I2C (JPI2C1) ..................................................................... 5-13

TPM Header (JTPM1) .............................................................................. 5-14

HDD Power (JP1,JP2) ............................................................................. 5-14

RT3 (J31) ................................................................................................. 5-14

5-10 Jumper Settings ............................................................................................ 5-15

Explanation of Jumpers ................................................................................ 5-15

CMOS Clear............................................................................................. 5-15

BMC Enable/Disable (JPB1) .................................................................... 5-15

VGA Enable/Disable................................................................................. 5-16

Watch Dog................................................................................................ 5-16

SMB Bus to PCI Slots.............................................................................. 5-16

ME Recovery............................................................................................ 5-16

ME Manufacturing Mode .......................................................................... 5-17

LAN1/LAN2 Enable/Disable ..................................................................... 5-17

System Type............................................................................................. 5-17

5-11 Onboard Indicators........................................................................................ 5-18

IPMI Dedicated LAN Port......................................................................... 5-18

LAN LEDs................................................................................................. 5-18

IPMI Heartbeat ......................................................................................... 5-18

Overheat/Fan Fail/PWR Fail LED ............................................................ 5-18

Unit ID LED .............................................................................................. 5-18

5-12 SATA Ports .................................................................................................... 5-19

I-SATA Ports ............................................................................................. 5-19

5-13 Installing Software......................................................................................... 5-20

SuperDoctor III.............................................................................................. 5-21

5-14 Onboard Battery............................................................................................ 5-22

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Table of Contents

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Removing the Covers ..................................................................................... 6-2

6-3 System Fans ................................................................................................... 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-5

Replacing Hard Drives .................................................................................... 6-5

6-5 Installing Expansion Cards ............................................................................. 6-7

6-6 Replacing the Power Supply........................................................................... 6-8

Power Supply Replacement............................................................................ 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-16

7-5 IPMI Conguration ........................................................................................ 7-17

7-6 Boot Settings .................................................................................................7-19

7-7 Security Settings ........................................................................................... 7-20

7-8 Exit Options................................................................................................... 7-21

Appendix A POST Error Beep Codes

Appendix B System Specications

Notes

SUPERSERVER 5017R-iHDP User's Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 6010L Bedienungsanleitung

Supermicro

Supermicro Superserver MicroCloud 5038MA-H24TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer ARS-210ME-FNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WT Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 5013G-6 Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TNR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBA-4119S-C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-MTNRV Bedienungsanleitung

Supermicro

Supermicro AS -1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6010H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-i Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-MT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-12TN4 Bedienungsanleitung

Supermicro

Supermicro FatTwin F619H6-FT Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9C Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 610U-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-511R-ML Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBS-820H-420P Bedienungsanleitung

Supermicro

Supermicro SuperServer 5038MR-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 540A-TR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung