Supermicro Superserver MicroCloud 5038MA-H24TRF Bedienungsanleitung

SUPER

SUPERSERVER®

MicroCloud

5038MA-H24TRF

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: April 24, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 5038MA-H24TRF.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5038MA-H24TRF is a 24-node MicroCloud server system based

on the SC939HA-R1K63BP 3U chassis and 12A1SA2-2750F serverboards. Please

refer to our web site for an up-to-date list of supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

system and describes the main features of the Super A1SA2-2750F serverboard

and the SC939HA-R1K63BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the server into a rack and

check out the server conﬁguration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5038MA-H24TRF.

iii

Preface

SUPERSERVER 5038MA-H24TRF User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the A1SA2-2750F serverboard, includ-

ing the locations and functions of connectors, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when reconﬁg-

uring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC939HA-R1K63BP 3U server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SATA .............................................................................................................. 1-2

Front I/O Ports ................................................................................................ 1-2

IPMI.................................................................................................................1-2

1-3 Server Chassis Features ................................................................................1-4

System Power................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ...................................................................2-4

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Nodes.............................................................................................................. 3-1

Power Button/LED...........................................................................................3-1

Warning LEDs.................................................................................................3-1

UID LED.......................................................................................................... 3-2

KVM Switch LED.............................................................................................3-2

3-3 Power Supply Module.....................................................................................3-2

Power Module LED.........................................................................................3-2

SUPERSERVER 5038MA-H24TRF User's Manual

vii

Table of Contents

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies ..........................................................................4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard...............................................................................5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Serverboard Installation/Removal................................................................... 5-2

5-3 Connecting Cables..........................................................................................5-2

5-4 I/O Ports.......................................................................................................... 5-2

5-5 Onboard Processors and Heatsinks............................................................... 5-2

5-6 Installing Memory............................................................................................ 5-3

How to Install Memory.................................................................................... 5-3

Installing DIMM Memory Modules...................................................................5-3

Removing Memory Modules ...........................................................................5-4

Memory Support..............................................................................................5-4

Memory Population Guidelines....................................................................... 5-4

5-7 Serverboard Details ........................................................................................ 5-5

A1SA2-2750F Quick Reference...................................................................... 5-6

5-8 Connector........................................................................................................5-7

5-9 I/O Ports.......................................................................................................... 5-7

5-10 Jumper Settings.............................................................................................. 5-8

5-11 Onboard Indicators........................................................................................5-10

5-12 SATA Ports.....................................................................................................5-11

5-13 Installing Software.........................................................................................5-12

SuperDoctor® 5 ............................................................................................ 5-13

5-14 Onboard Battery............................................................................................5-14

viii

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Removing the Chassis Cover .........................................................................6-2

6-3 Corresponding Sleds and Fans ......................................................................6-3

6-4 Removing and Installing Sleds .......................................................................6-4

6-5 Installing/Removing Hard Drives..................................................................... 6-5

6-6 System Fans................................................................................................... 6-7

6-7 Power Supply.................................................................................................. 6-8

Power Supply Replacement............................................................................ 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data.........................................................7-1

How to Start the Setup Utility .........................................................................7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs....................................................................................................7-26

7-5 IPMI............................................................................................................... 7-28

7-6 Security Settings........................................................................................... 7-30

7-7 Boot Settings.................................................................................................7-33

7-8 Save & Exit ................................................................................................... 7-34

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSERVER 5038MA-H24TRF User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 5038MA-H24TRF is a MicroCloud server system comprised of

the SC939HA-R1K63BP 3U chassis and 12 A1SA2-2750F serverboards. Please

refer to our web site for information on operating systems that have been certiﬁed

for use with the 5038MA-H24TRF (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 5038MA-H24TRF, as listed below:

• Four chassis fans (FAN-0145L4)

• Twelve backplane add-on cards (AOM-BPN-MC24A-O-P)

• Twelve power distribution board add-on cards (AOM-PDB-MC24-O-P)

• One MicroCloud hot-swap backplane (BPN-SAS-939H)

• One rail kit (MCP-290-41803-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://super-dev/about/policies/safety_information.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5038MA-H24TRF User's Manual

1-2 Serverboard Features

The 5038MA-H24TRF includes a total of 12 A1SA2-2750F dual processor server-

boards. Each serverboard constitutes two nodes in the system. Below are the main

features of the A1SA2-2750F. (See Figure 1-1 for a block diagram.)

Processors

Each A1SA2-2750F supports two 64-bit, Intel®Atom™ C2750 Tri-Gate SoC

(System-on-a-Chip) processor based on low-power Silvermont microarchitecture

in a BGA 1283 package. Please refer to the serverboard description pages on our

web site for a complete listing of supported processors (www.supermicro.com).

Memory

Each A1SA2-2750F has eight memory slots that can support up to 64 GB of ECC

DDR3-1600 UDIMM (Unbuffered), VLP (Very Low Proﬁle) memory. This equates

to a maximum of 768 GB for the system. Memory modules of the same size and

speed should be used. See Chapter 5 for details.

SATA

A SATA controller integrated into the serverboard provides a four-port SATA 3.0

subsystem. Each sled supports either two or four 2.5” SATA 3.0 (or SSD) hard

drives (one or two drives per node).

Front I/O Ports

The front I/O panel on each serverboard includes one KVM connector, four Gb

Ethernet LAN ports (two for each node), one dedicated IPMI LAN port, a power

button and a node switch (for KVM).

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-

ﬁcation that provides remote access, monitoring and administration for Supermicro

server platforms. IPMI allows server administrators to view a server’s hardware

status remotely, receive an alarm automatically if a failure occurs, and power cycle

a system that is non-responsive. Each node features IPMI 2.0 with KVM over a

dedicated LAN port.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 2028BT-HTR+ Bedienungsanleitung

Supermicro

Supermicro 8028B-TR4F Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018R-TDTP Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028UX-TR4 Bedienungsanleitung

Supermicro

Supermicro SBI-7427R-S2L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018TR-T Bedienungsanleitung

Supermicro

Supermicro E100-9AP-IA Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-213A-N8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GP-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6035B-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 120C-TN10R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018A-MHN4 Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro SBI-7228R-T2F Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 4029GP-TVRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621H-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-421E-1T3N Bedienungsanleitung

Supermicro

Supermicro SuperServer 7088B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-120TP-DTTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6010H Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-WR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung