Supermicro 5018D2-AR12L Bedienungsanleitung

SUPER STORAGE SYSTEM

5018D2-AR12L

5018D4-AR12L

5018D8-AR12L

USER’S MANUAL

1.0b

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0b

Release Date: August 3, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperStorage Server

5018D2-AR12L/5018D4-AR12L/5018D8-AR12L. Installation and maintainance

should be performed by experienced technicians only.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10SDV-2C-7TP4F/X10S-

DV-4C-7TP4F/X10SDV-7TP4F motherboard and the SC801LTS-R406P chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperStorage Server

5018D2-AR12L/5018D4-AR12L/5018D8-AR12L into a rack and check out the server

conguration prior to powering up the system.

Chapter 3: Standardized Warning Statements

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardzed Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperStorage Server 5018D2-AR12L/5018D4-AR12L/5018D8-AR12L.

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X10SDV-2C-7TP4F/X10SDV-4C-

7TP4F/X10SDV-7TP4F motherboard, including the locations and functions of

connections, headers and jumpers. Refer to this chapter when adding or removing

processors or main memory and when reconguring the motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC801LTS-R406P server chassis.

You should follow the procedures given in this chapter when installing, removing

or reconguring SATA drives and when replacing system power supply units and

cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

SUPERSTORAGESYSTEM 5018D2-AR12L/D4-AR12L/D8-AR12L User's Manual

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS/SATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Rear I/O Ports................................................................................................. 1-2

Graphics Controller ......................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

System Fans ................................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Installing the Chassis into a Standard Rack................................................... 2-4

Assembling the Outer Rails ............................................................................ 2-5

Installing the Outer Rails onto the Rack......................................................... 2-6

Sliding the Chassis onto the Rack.................................................................. 2-7

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

SUPERSTORAGESYSTEM 5018D2-AR12L/D4-AR12L/D8-AR12L User's Manual

vii

Power .............................................................................................................. 3-2

Reset............................................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

UID LED.......................................................................................................... 3-2

NIC .................................................................................................................. 3-2

HDD................................................................................................................. 3-3

3-4 Power Supply LEDs ........................................................................................ 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 Installing Memory............................................................................................ 5-4

5-5 Adding PCI Expansion Cards ......................................................................... 5-5

5-6 Motherboard Details........................................................................................ 5-6

X10SDV Series Quick Reference ................................................................... 5-7

5-7 Connector Denitions ..................................................................................... 5-9

5-8 Jumper Settings ............................................................................................ 5-16

5-9 Onboard Indicators........................................................................................ 5-19

5-10 SATA/SAS Ports............................................................................................ 5-21

5-11 Installing Drivers............................................................................................ 5-22

Table of Contents

viii

SuperDoctor® 5 ............................................................................................ 5-23

5-13 Onboard Battery............................................................................................ 5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing Power from the System ................................................................. 6-2

6-4 Removing the Chassis Cover ......................................................................... 6-3

6-5 Installing and Replacing Hard Drives.............................................................. 6-4

6-6 System Fans ................................................................................................... 6-5

6-6 Installing an Expansion Card .......................................................................... 6-6

6-7 Power Supply.................................................................................................. 6-8

Replacing the Power Supply........................................................................... 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-28

7-5 IPMI............................................................................................................... 7-30

7-6 Security Settings ........................................................................................... 7-33

7-7 Boot Settings................................................................................................. 7-36

7-8 Save & Exit ................................................................................................... 7-38

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSTORAGESYSTEM 5018D2-AR12L/D4-AR12L/D8-AR12L User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperStorage 5018D2-AR12L/5018D4-AR12L/5018D8-AR12L is a storage

system comprised of two main subsystems: the SC801LTS-R406P 1U chassis

and the X10SDV-2C-7TP4F/X10SDV-4C-7TP4F/X10SDV-7TP4F single processor

motherboard. Please refer to our website for information on operating systems that

have been certied for use with the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5018D2-AR12L/5018D4-AR12L/5018D8-AR12L, as listed

below:

• Six 4-cm PWM fans (FAN-0154L4)

• One riser card (RSC-RR1U-E8)

• SATA accessories:

Two HDD backplanes (BPN-SAS-801T-A2)

Two HDD backplanes (BPN-SAS-801T-A4)

Twelve xed 3.5" HDD brackets (MCP-220-00134-0N)

Optional: two brackets for single/dual 2.5" drives (MCP-220-00137-0N)

• One rack rail kit (MCP-290-00066-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSTORAGESYSTEM 5018D2-AR12L/D4-AR12L/D8-AR12L User's Manual

1-2 Motherboard Features

The SuperStorage Server 5018D2-AR12L/5018D4-AR12L/5018D8-AR12L is built

around the X10SDV-2C-7TP4F/X10SDV-4C-7TP4F/X10SDV-7TP4F, a single

processor motherboard. Below are the main features of the X10SDV-2C-7TP4F/

X10SDV-4C-7TP4F/X10SDV-7TP4F. See Section 5-6 for a layout and cariances of

the three motherboards.

Processors

The X10SDV-2C-7TP4F/X10SDV-4C-7TP4F/X10SDV-7TP4F supports a single

Intel® Xeon/Pentium® D-1500 Family SoC embedded processor (SoC = System

on a Chip).

Memory

The X10SDV-2C-7TP4F/X10SDV-4C-7TP4F/X10SDV-7TP4F has four DIMM slots

that can support up to 128 GB of ECC RDIMM (Registered DIMM) or 64 GB of

ECC/non-ECC UDIMM (Unregistered DIMM) DDR4-2133/1866/1600 memory. See

Chapter 5 for details.

SAS/SATA

A SATA controller is integrated into the chipset to provide six SATA 3.0 (6/Gbps)

ports. In addition, an LSI 2116 controller is included on the motherboard to provide

sixteen SAS2.0 ports.

PCI Expansion Slots

The X10SDV-2C-7TP4F/X10SDV-4C-7TP4F/X10SDV-7TP4F has one M.2 PCI-E

3.0 x4 slot, an M Key for 2242/2280/22110 SSDs and one mini PCI-E 2.0 x1 slot

with mSATA support (Mux with I-SATA5).

Rear I/O Ports

The rear I/O ports include a VGA port, two USB 3.0 ports, two Gb Ethernet (RJ45)

LAN ports, a dedicated IPMI LAN port and two 10 Gb (SPF+) Ethernet LAN ports

Graphics Controller

The X10SDV-2C-7TP4F/X10SDV-4C-7TP4F/X10SDV-7TP4F features an integrated

AST 2400 graphics controller.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro Superserver Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620H-TN12R Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6049P-E1CR45H Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-511R-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 2026GT-TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8016B-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-520P-WTR Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 1028R-WTR Series Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN12RV Bedienungsanleitung

Supermicro

Supermicro 8050 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-421GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-821GE-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer E200-8D Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-121E-NES24R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211SE-31A Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2026T-DE2R24L Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-E1CR90 Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GP-TNAR Bedienungsanleitung

Supermicro

Supermicro AS-1023US-TR4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung