Supermicro SUPERSERVER 6036ST-6LR Bedienungsanleitung

SUPERSERVER 6036ST-6LR

SUPER

USER’S MANUAL

1.0c

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harm-

ful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0c

Release Date: January 2, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6036ST-6LR.

Installation and maintainance should be performed by experienced technicians

only.

The SuperServer 6036ST-6LR is a high-end storage server solution based on the

SC937 3U rackmount chassis and the X8DTS-F dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X8DTS-F serverboard and

the SC937ETS-R1200NDBP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6036ST-6LR

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panels on the chassis as well the HDD carrier

LEDs.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6036ST-6LR.

SUPERSERVER 6036ST-6LR User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTS-F serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC937 server chassis. You should

follow the procedures given in this chapter when installing, removing or reconﬁgur-

ing SAS/SATA or peripheral drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................ 1-2

SATA .............................................................................................................. 1-2

PCI Expansion Slots ....................................................................................... 1-2

Rear Chassis Ports ......................................................................................... 1-3

Graphics Controller ......................................................................................... 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

SAS/SATA Subsystem..................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System ............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

1-5 SBB: Storage Bridge Bay ............................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Installing the Inner Rack Rails ........................................................................ 2-4

Installing the Outer Rack Rails ....................................................................... 2-5

SUPERSERVER 6036ST-6LR User's Manual

vii

Installing the Chassis into a Rack................................................................... 2-6

2-5 Checking the Serverboard Setup.................................................................... 2-7

2-6 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button....................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................ 3-1

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal ........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Cable and Device Connectiions...................................................................... 5-2

Power Connections .................................................................................... 5-2

Fan Cabling................................................................................................ 5-2

Control Panels............................................................................................ 5-2

SSB Connections ....................................................................................... 5-2

5-3 Installing the Processor and Heatsink ............................................................ 5-3

Installing an LGA1366 Processor ................................................................... 5-3

Installing the Heatsink..................................................................................... 5-5

Removing the Heatsink................................................................................... 5-5

5-4 Installing Memory ............................................................................................ 5-6

Memory Support.............................................................................................. 5-6

Table of Contents

viii

DIMM Installation ............................................................................................ 5-6

5-5 Installing PCI Add-On Cards........................................................................... 5-8

5-6 Serverboard Details ...................................................................................... 5-10

X8DTS-F Quick Reference ............................................................................5-11

5-7 Connector Deﬁnitions ................................................................................... 5-12

5-8 Jumper Settings ............................................................................................ 5-14

5-9 Onboard Indicators........................................................................................ 5-16

5-10 Installing Software......................................................................................... 5-17

SuperDoctor III.............................................................................................. 5-18

5-11 Onboard Battery............................................................................................ 5-20

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-5

Accessing the Drive Bays ............................................................................... 6-5

Hard Drive Midplane ....................................................................................... 6-5

SAS 2.0 Controller .......................................................................................... 6-5

SAS/SATA Drive Installation............................................................................ 6-5

6-5 Midplane.......................................................................................................... 6-8

6-6 Power Supply .................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Replacing the Power Supply........................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations...................................................................... 7-4

7-4 Security Settings ........................................................................................... 7-24

7-5 Boot Conﬁguration ........................................................................................ 7-25

7-6 Exit Options................................................................................................... 7-26

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSERVER 6036ST-6LR User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 6036ST-6LR is a high-end Super Storage Bridge Bay (SBB) sys-

tem comprised of two main subsystems: the SC937 chassis and two X8DTS-F dual

processor serverboards. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6036ST-6LR, as listed below:

• Four passive CPU heatsinks (SNK-P0037P)

• Twelve 4-cm fans (FAN-0088L4)

• Two KVM cables (CBL-0218L)

• SAS/SATA Accessories

One SAS midplane (BPN-SAS-937-O-P)

Sixteen hard drive carriers (MCP-220-97301-0B)

SATA interposer add-on cards (optional, AOC-LSISS9252)

• Two riser cards for PCI-Express x16 expansion cards (RSC-R2UT-2E4E8R)

• Two SAS controller mezzanine cards (AOM-SAS2-L8)

• One set of rackmount hardware (MCP-290-00053-ON)

• One CD containing drivers and utilities

• SuperServer 6036ST-6LR User's Manual

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6036ST-6LR User's Manual

1-2 Serverboard Features

The SuperServer 6036ST-6LR is built around two X8DTS-F serverboards for a

dual-node system. The X8DTS-F is a dual processor serverboard based on the

Intel® 5520 chipset (5520/IOH-36D + ICH10). Below are the main features of the

X8DTS-F. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X8DTS-F supports single or dual Intel® Xeon 5500/5600 Series processors in

LGA1366 type sockets. Two X8DTS-F boards are included in the storage system.

Please refer to the serverboard description pages on our web site for a complete

listing of supported processors (www.supermicro.com).

Memory

Each X8DTS-F has six DIMM slots that can support up to 48 GB of ECC regis-

tered DDR3-1333/1066/800 or up to 24 GB of ECC/non-ECC unbuffered DDR3-

1333/1066/800 SDRAM. See Chapter 5 for details.

SAS

SAS 2.0 support with a x36 expander is provided with an LSI 2008 SAS control-

ler option on a mezzanine card (p/n AOM-SAS2-L8). A total of 16 SAS hot-swap

drives are supported.

Notes: The operating system you use must have RAID support to enable the

hot-swap capability and RAID function of the SAS drives. LSI 2008 supports

RAID 0, 1, 10 and 1E modes. Refer to the following ftp site for setup guidelines:

<ftp://ftp.supermicro.com/driver/SAS/LSI/LSI_SAS_EmbMRAID_SWUG.pdf> and

Supermicro's web site for additional inmformation < http://www.supermicro.com/

support/manuals/> (RAID is supported by third-party software.)

SATA

Special add-on cards installed in the drive carriers provide support for SATA drives.

Each carrier must have one AOC-LSISS9252 card installed to support a SATA drive.

See Chapter 6 for details.

PCI Expansion Slots

Each X8DTS-F can support two PCI-E x4 and one PCI-E x8 add-on cards with the

use of a RSC-R2UT-2E4E8R riser card (included).

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 1029P-WTR Bedienungsanleitung

Supermicro

Supermicro AS-1041M-82 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-4C-FN8TP Bedienungsanleitung

Supermicro

Supermicro GEM002 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015X-8 Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F2014S-RNTR Bedienungsanleitung

Supermicro

Supermicro AS-1020A-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-M2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-T Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-E Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-WTR Bedienungsanleitung

Supermicro

Supermicro TwinPro 1029TP-DTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6035B-8 Bedienungsanleitung

Supermicro

Supermicro AS-1020P-8R Bedienungsanleitung

Supermicro

Supermicro BPN-NVMe3-116UN Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021i Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E302-12A-4C Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028UX-CR-LL1 Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510P-M Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6013L-8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung