Supermicro SUPERSERVER 5018R-M Bedienungsanleitung

SUPERSERVER®

5018R-M

5018R-MR

USER’S MANUAL

1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: October 19, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 5018R-

M/5018R-MR. Installation and maintenance should be performed by experienced

technicians only.

The SuperServer 5018R-M/5018R-MR is a high-end server based on the

SC813MTQ-350CB/SC813MTQ-R400CB 1U rackmount chassis and the Super

X10SRi-F single processor motherboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10SRi-F motherboard and

the SC813MTQ-350CB/SC813MTQ-R400CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018R-

M/5018R-MR into a rack and check out the server conguration prior to powering

up the system. If your server was ordered without processor and memory compo-

nents, this chapter will refer you to the appropriate sections of the manual for their

installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018R-M/5018R-MR.

SUPERSERVER 5018R-M/5018R-MR User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X10SRi-F motherboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC813MTQ-350CB/SC813MTQ-

R400CB server chassis. You should follow the procedures given in this chapter when

installing, removing or reconguring SATA or peripheral drives and when replacing

system power supply modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

I/O Ports.......................................................................................................... 1-2

Graphics Controller ......................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Control Panel .................................................................................................. 1-3

Cooling Fans................................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Rear Inner Rails ........................................................................ 2-4

Installing the Rack Rails ................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

SUPERSERVER 5018R-M/5018R-MR User's Manual

vii

Table of Contents

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing an LGA2011 Processor.................................................................... 5-2

Installing a Passive CPU Heatsink ................................................................. 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel......................................................................... 5-6

5-4 I/O Ports.......................................................................................................... 5-7

viii

SUPERSERVER 5018R-M/5018R-MR User's Manual

5-5 Installing Memory............................................................................................ 5-8

5-6 Adding PCI Cards ......................................................................................... 5-10

5-7 Motherboard Details.......................................................................................5-11

X10SRi-F Quick Reference............................................................................5-11

5-8 Connector Denitions ................................................................................... 5-13

5-9 Jumper Settings ............................................................................................ 5-19

5-10 Onboard Indicators........................................................................................ 5-22

5-11 SATA Ports .................................................................................................... 5-23

5-12 Installing Software......................................................................................... 5-24

SuperDoctor® 5 ............................................................................................ 5-25

5-13 Onboard Battery............................................................................................ 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Accessing the System..................................................................................... 6-2

6-4 System Fans ................................................................................................... 6-3

6-5 Drive Bay Installation/Removal ....................................................................... 6-4

Accessing the Drive Bays ............................................................................... 6-4

SATA Drive Installation.................................................................................... 6-5

SATA Backplane.............................................................................................. 6-5

6-6 Power Supply.................................................................................................. 6-8

5018R-M Power .............................................................................................. 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-33

7-5 IPMI............................................................................................................... 7-35

7-6 Security Settings ........................................................................................... 7-38

7-7 Boot Settings................................................................................................. 7-39

7-8 Save & Exit ................................................................................................... 7-41

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Chapter 1

Introduction

1-1 Overview

The SuperServer 5018R-M/5018R-MR is a high-end server comprised of two

main subsystems: the SC813MTQ-350CB/SC813MTQ-R400CB 1U server chassis

and the X10SRi-F single processor motherboard. Please refer to our web site for

information on operating systems that have been certied for use with the system

(www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 5018R-M/5018R-MR, as listed below:

• Four 4-cm fans (FAN-0065L4)

• One passive CPU heatsink (SNK-P0047PS)

• One air shroud (MCP-310-19007-0N)

• One riser card for one PCI-E 3.0 x16 PCI add-on card in a PCI-E 3.0 x16 slot

(RSC-RR1U-E16)

• One rackmount kit (CSE-PT52)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info: http://www.supermicro.com/about/policies/safety_informa-

tion.cfm

• If you have any questions, please contact our support team at:

[email protected]

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5018R-M/5018R-MR User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 5018R-M/5018R-MR lies the X10SRi-F, a single

processor motherboard based on the Intel® C612 Express chipset. Below are the

main features of the X10SRi-F (see Figure 1-1 for a block diagram of the chipset).

Processors

The X10SRi-F supports a single Intel® Xeon® processor E5-2600 v3/v4 or E5-1600

v3/v4 family in an LGA2011 socket. Please refer to the motherboard description

pages on our website for a complete listing of supported processors.

Memory

The X10SRi-F has eight DIMM sockets that can support up to 1 TB of ECC 3DS

LRDIMM (Load-Reduced DIMM), 512 GB of ECC LRDIMM or 256 GB of ECC

RDIMM (Registered DIMMs) DDR4-2400/2133/1866/1600 memory. Please refer to

Chapter 5 for installing memory.

Serial ATA

A SATA controller is integrated into the C612 chipset to support ten SATA 3.0 (6

Gb/s) ports. RAID 0, 1, 5 and 10 levels supported.

I/O Ports

The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports,

two USB 2.0 ports, and two gigabit Ethernet ports. A dedicated IPMI LAN port is

also included.

Graphics Controller

The X10SRi-F features an integrated AST 2400 graphics controller.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-511R-ML Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221P-C9R Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12TRF Bedienungsanleitung

Supermicro

Supermicro 8050 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-TN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN12RV Bedienungsanleitung

Supermicro

Supermicro SERIES3800/S120T Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-MN4 Bedienungsanleitung

Supermicro

Supermicro 7048GR-TR Betriebsanleitung

Supermicro

Supermicro AS-511E-WR Montageanleitung

Supermicro

Supermicro 7043P-8R Bedienungsanleitung

Supermicro

Supermicro AS-1023US-TR4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 120U-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015V-M3 Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-8D Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-510P-M Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220HE-TNR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-611E-1C2N Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521R-T Bedienungsanleitung

Supermicro

Supermicro SuperBlade IBS-001 Bedienungsanleitung

Supermicro

Supermicro 6028R-WTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung