Supermicro 2028UT-BC1NRT Bedienungsanleitung

SUPER

SUPERSERVER

2028UT-BC1NRT

2028UT-BTNRT

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: November 4, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and maintenance which should be performed

by experienced technicians only.

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 2028UT-BTNRT/BC1NRT User's Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features .................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

Expansion Slots .............................................................................................. 1-2

Input/Output Ports........................................................................................... 1-2

IPMI................................................................................................................. 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Drive Bays....................................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-2

Ambient Operating Temperature ................................................................ 2-2

Airow......................................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-3 Installing the System into a Rack .................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing the Inner Rails on the Chassis ........................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Preface

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

Overheat Temperature Setting ................................................................... 3-3

Responses.................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

Warning Denition........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Installing the Processor and Heatsink ............................................................ 5-2

Installing an LGA 2011 Processor................................................................... 5-2

Installing a CPU Heatsink ............................................................................... 5-5

Removing the Heatsink .................................................................................. 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-9

Processor & Memory Module Population Conguration ............................ 5-9

Fully-Populated Conguration .................................................................... 5-9

Half-Populated Conguration ..................................................................... 5-9

SUPERSERVER 2028UT-BTNRT/BC1NRT User's Manual

RDIMM/LRDIMM DDR3 ECC in Performance Mode (2:1) ..................... 5-10

RDIMM/LRDIMM DDR3 ECC in Lockstep Mode (1:1) ........................... 5-10

5-6 Serverboard Details .......................................................................................5-11

Quick Reference ........................................................................................... 5-12

5-7 Connector Denitions.................................................................................... 5-14

5-8 Jumper Settings ............................................................................................ 5-16

5-9 Onboard Indicators........................................................................................ 5-19

5-10 SATA Ports .................................................................................................... 5-20

5-11 Installing Software......................................................................................... 5-21

SuperDoctor®5 ............................................................................................. 5-22

5-12 Onboard Battery............................................................................................ 5-24

Chapter 6 Advanced Chassis Setup

6-1 Removing the Power....................................................................................... 6-1

6-2 Chassis Cover................................................................................................. 6-2

6-3 Installing Drives............................................................................................... 6-3

6-4 Expansion Card Setup ................................................................................... 6-6

6-5 System Cooling............................................................................................... 6-7

System Fan Failure......................................................................................... 6-7

Air Shroud ....................................................................................................... 6-9

6-6 Power Supply................................................................................................ 6-10

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Event Logs ....................................................................................................7-46

7-5 IPMI............................................................................................................... 7-48

7-6 Security......................................................................................................... 7-50

7-7 Boot............................................................................................................... 7-51

7-8 Save & Exit ................................................................................................... 7-53

Appendix A BIOS POST Error Codes .................................................... A-1

Appendix B System Specications ........................................................ B-1

Chapter 1

Introduction

1-1 Overview

This chapter provides a brief outline of the functions and features of the

2028UT-BTNRT/BC1NRT. The server is two independent computing nodes, each

based on the X10DBT-T serverboard, all in the SC227HD-R1K28 chassis. The

2028UT-BC1NRT model includes the LSI SAS3108 12Gb/s SAS RAID-on-Chip.

In addition to the serverboards and chassis, several important parts that are included

with the system are listed below.

•Backplanes:

•Supports sixteen 2.5" SAS/SATA drives and four PCIe SSD drive (BPN-

SAS3-227HD-N2)

•Two PBF Right 1U adapter cards for EX DP 2U, 8x PCIe gen3 lanes (BPN-

ADP-8PCIE3-1UBR)

•For 2028UT-BC1NRT only, two EX DP 2U, SAS 3108 daughter cards (BPN-

ADP-8S3108-1UBL)

•For 2028UT-BTNRT only, two PBF Left 1U adapter cards for EX DP 2U, 8x

SATA3 ports (BPN-ADP-8SATA3-1UBL)

•Riser card (RSC-R1UW-2E16)

•Air shroud (MCP-310-22701)

•Heat sink (SNK-P0057PS)

•One rail set (MCP-290-00053, MCP-290-00060)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety information:

http://super-dev/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 2028UT-BTNRT/BC1NRT User's Manual

1-2 Serverboard Features

At the heart of each node is the X10DBT-T, a dual processor serverboard based

on the Intel C602 chipset. Below are the main features of the serverboard. See

Figure 1-1 for a block diagram.

Processors

The serverboard supports two Intel Xeon E7-8800 v2/E7-4800 v2/E7-2800 v2

processors in LGA 2011 sockets (Socket R1). Please refer to the serverboard

description pages on our web site for a complete listing of supported processors

(www.supermicro.com).

Memory

The serverboard has 32 DIMM slots that can support up to 1TB registered

(RDIMM) or up to 2TB of load reduced (LRDIMM) memory. Memory Type is

1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

Modules of the same size and speed are recommended. See Chapter 5 for details.

Serial ATA

The serverboard supports eight SATA ports, that is two SATA3 and six SATA2. These

allow RAID 0, 1, 5, 10. The SATA drives are hot-swappable. Additional SATA ports

are available with a PCIe expansion card.

Expansion Slots

Each node has:

•Two PCI Express x16 slots for full height, half length expansion cards

•One PCIe x8 microLP card

•Two solid-state drive (SSD) slots for non-volatile memory express (NVMe) drives

with Windows 8 support

Input/Output Ports

The rear I/O ports for each node include two 10Gbase-T Ethernet LAN ports, two

USB 2.0 ports, one dedicated IPMI LAN port, a VGA (monitor) port, one serial

COM port.

1-3

Chapter 1: Introduction

IPMI

IPMI (Intelligent Platform Management Interface) is a hardware-level interface

specication that provides remote access, monitoring and administration for

Supermicro server platforms. IPMI allows server administrators to view a server’s

hardware status remotely, receive an alarm automatically if a failure occurs, and

power cycle a system that is non-responsive.

1-3 Server Chassis Features

Some features of the SC227HD-R1K28 chassis are listed below.

System Power

The system features two high-efciency, hot-plug, 80 Plus Platinum level, digital

1280W redundant power supplies. One power module may be removed without

shutting down the system. See Chapter 6 for details.

Drive Bays

The chassis includes twenty 2.5" drive bays and four dummy bays to allow for

cooling. Each node can control eight hot-swappable SATA or SAS drives and two

NVMe (Non Volatile Memory Express) drives. .

Front Control Panel

Two control panels provide on the front of the chassis a system monitoring and

control interface for each computing node. LEDs indicate network activity, system

overheat, UID and power supply failure. A main power button and a UID button

are also included.

Cooling System

The chassis has an innovative cooling design that includes four 4-cm PWM (Pulse

Width Modulated) fans and an air shroud to focus airow where it is needed. The

power supply module also includes a cooling fan. All fans operate continuously.

The CPU and chassis fan speeds are controlled by IPMI Thermal Management. A

thermal control sensor monitors the CPU temperature in real time and controls fan.

The chassis thermal circuitry monitors the overall system temperature and alerts

when the chassis temperature is too high.

1-4

SUPERSERVER 2028UT-BTNRT/BC1NRT User's Manual

PCI-E x8 GEN3

CPU1

CPU2

PE0 PE1 DMI

DDR3 DIMM

PCI-32bit

164E/164H

SPI FLASH

LPC

DDR3 DIMM

PCIe Gen3 x8 (0-7)

PCIe Gen3 x8 (8-15)

SXB1

PCIe Gen3 x16

SXB4

TPM Header

USB

LAN

I350 /

X540

2 ports

RJ45RJ45

UM56

PCIe Gen3 x16

DMI Gen2 x4

PROCESSOR

QPI

U3G1

UMB1

PCIe Gen3 x16

SXB2

SSB

QPI

DMI

VGA BMC

VGA CONN

AST2400

DDR2

PHY1

LAN

RTL8211E

SPI

Left Socket

Right Socket

PCIe Gen3 x16

MicroLP

PCIe Gen3 x8 (0-7)

PCIe Gen3 x8 (8-15)

PCI-E x16 Gen 3

DDR3 DIMM

#2 B

DDR3 DIMM

#2 #1

DDR3 DIMM

#2 A

PCI-E x16 Gen 3

DDR3 DIMM

P1M1CD

DDR3 DIMM

Combine with SATA/SAS interface

PCI-E x8 GEN3

3/1.5 Gb/s

6 Gb/s for Port 0,1

3/1.5 Gb/s

SATA2 #4 DOM

SATA2 #5 DOM

SATA3 #0

SATA3 #1

SATA2 #3

SATA2 #0

SATA2 #1

SATA2 #3

SATA2 #2

USB 2.0

REAR

MicroLP

0,1 4,5

USB Type-A

SMI2

CH1

COM1

CONN

COM1

SXB3

NVMe8

SXBP

SCU

SATA

BIOS 16MB

CH0

SMI2 CH3

SMI2

CH2

SMI2

CH3

SMI2

CH2

SMI2

CH0

SMI2

CH1

SMI2

C102

P1M1AB P2M2CD P2M2AB

PE1 PE0 DMI

P1M2AB P1M2CD P2M1AB P2M1CD

Intel C102

Intel

C102

Intel

C102

Intel

C102

Intel

C102

Intel

Figure 1-1. General System Block Diagram

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 510T-ML Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-421GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014P-32 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-C1R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211SE-31A Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNMR2 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-6119R-C3N Bedienungsanleitung

Supermicro

Supermicro SERIES3800/S120T Bedienungsanleitung

Supermicro

Supermicro SuperServer 8049U-E1CR4T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-T2 Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TNR Bedienungsanleitung

Supermicro

Supermicro X13SRA-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-ACR16H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1015B-3 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018R-M Bedienungsanleitung

Supermicro

Supermicro E100-9AP-IA Bedienungsanleitung

Supermicro

Supermicro superserver 2028TP-VRL Serie Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5025M-UR Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-8Q Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-C Bedienungsanleitung

Supermicro

Supermicro 8048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-311A-1C2 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung