Supermicro SuperServer 6016T-MT Bedienungsanleitung

SUPER

SUPERSERVER 6016T-MT

USER’S MANUAL

Revision 1.0a

Manual Revision 1.0a

Release Date: December 22, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDINGTHE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6016T-MT. In-

stallation and maintenance should be performed by experienced technicians only.

The SuperServer 6016T-MT is a 1U rackmount server based on the SC813MTQ-

520CB server chassis and the Super X8DTL-i serverboard. Please refer to our web

site for updates on supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X8DTL-i serverboard

and the SC813MTQ-520CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6016T-MTinto

a rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

iii

Preface

SUPERSERVER 6016T-MT User's Manual

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6016T-MT.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTL-i serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC813MTQ-520CB chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring Serial ATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Error Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 6016T-MT User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processor........................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots....................................................................................... 1-2

Backpanel Ports..............................................................................................1-2

1-3 Server Chassis Features ................................................................................ 1-4

System Power.................................................................................................1-4

Serial ATA Subsystem.....................................................................................1-4

Control Panel .................................................................................................. 1-4

Rear I/O Panel................................................................................................ 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations.......................................................................2-3

Ambient Operating Temperature................................................................ 2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Rear Inner Rails ........................................................................2-4

Installing the Rack Rails .................................................................................2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack........................................................... 2-7

2-5 Checking the Motherboard Setup...................................................................2-8

vii

Table of Contents

2-6 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2................................................................................................................3-2

NIC1................................................................................................................3-2

HDD................................................................................................................. 3-2

Power..............................................................................................................3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions.............................................................................................4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 Serverboard Installation.................................................................................. 5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 Rear I/O Ports.................................................................................................5-4

5-5 Installing the Processor and Heatsink ............................................................5-5

Installing an LGA1366 Processor ...................................................................5-5

Installing a Passive CPU Heatsink .................................................................5-7

Removing the Heatsink................................................................................... 5-8

5-6 Installing Memory Modules.............................................................................5-9

Installing & Removing DIMMs......................................................................... 5-9

Memory Support.......................................................................................5-10

Populating DIMMs.................................................................................... 5-10

5-7 Adding PCI Cards..........................................................................................5-11

5-8 Serverboard Details ...................................................................................... 5-12

viii

SUPERSERVER 6016T-MT User's Manual

Serverboard Layout.......................................................................................5-12

X8DTL-i Quick Reference............................................................................. 5-13

5-9 Connector Deﬁnitions ...................................................................................5-14

ATX Power Connector..............................................................................5-14

Processor Power Connector ...................................................................5-14

PW_ON Connector...................................................................................5-14

Reset Connector ...................................................................................... 5-14

Power Fail LED........................................................................................ 5-15

Overheat LED (OH)..................................................................................5-15

NIC2 (LAN2) LED.....................................................................................5-15

NIC1 (LAN1) LED.....................................................................................5-15

HDD LED.................................................................................................. 5-15

Power On LED......................................................................................... 5-16

NMI Button ............................................................................................... 5-16

Fan Headers............................................................................................. 5-16

ATX PS/2 Keyboard and PS/2 Mouse Ports............................................ 5-16

Chassis Intrusion......................................................................................5-16

Universal Serial Bus (USB)...................................................................... 5-17

Serial Ports...............................................................................................5-17

Wake-On-LAN .......................................................................................... 5-17

Onboard Speaker (SP1)........................................................................... 5-18

Power LED/Speaker................................................................................. 5-18

SGPIO Headers ....................................................................................... 5-18

I-Button..................................................................................................... 5-18

LAN1/2 (Ethernet Ports)........................................................................... 5-19

Power SMB (I2C) Header.........................................................................5-19

IPMB.........................................................................................................5-19

Overheat LED/Fan Fail (JOH1)................................................................ 5-19

Unit Identiﬁer Button................................................................................. 5-19

5-10 Jumper Settings............................................................................................ 5-20

Explanation of Jumpers ................................................................................5-20

CMOS Clear.............................................................................................5-20

VGA Enable/Disable................................................................................. 5-20

LAN1/LAN2 Enable/Disable.....................................................................5-21

Watch Dog................................................................................................ 5-21

I2C Bus to PCI/PCI-Exp. Slots................................................................. 5-21

5-11 Onboard Indicators........................................................................................5-22

LAN1/LAN2 LEDs.....................................................................................5-22

Onboard Power LED ............................................................................... 5-22

Table of Contents

Rear UID LED .........................................................................................5-22

5-12 SATA Ports.................................................................................................... 5-23

SATA Ports ............................................................................................... 5-23

5-13 Installing Software.........................................................................................5-24

Supero Doctor III...........................................................................................5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-3

Removing the Front Bezel..............................................................................6-3

SATA Drive Installation....................................................................................6-4

Accessing the Drive Bays............................................................................... 6-4

SATA Backplane.............................................................................................. 6-5

6-5 Power Supply..................................................................................................6-7

Power Supply Failure...................................................................................... 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-23

7-5 Boot Conﬁguration ........................................................................................ 7-24

7-6 Exit Options...................................................................................................7-26

Appendix A BIOS Post Error Codes

Appendix B Installing Windows

Appendix C System Speciﬁcations

Notes

SUPERSERVER 6016T-MT User's Manual

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer E301-9D-8CN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-2021A-T2R+F Bedienungsanleitung

Supermicro

Supermicro AS-8125GS-TNHR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029P-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2026T-DE2R24L Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 1028R-WTR Series Bedienungsanleitung

Supermicro

Supermicro SuperServer AS -1015A-MT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022P-i Bedienungsanleitung

Supermicro

Supermicro SBA-7141A-T Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7125W-S6 Bedienungsanleitung

Supermicro

Supermicro 6018R-WTR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8CN8 Bedienungsanleitung

Supermicro

Supermicro SUPERO 6027TR-D71RF SUPERSERVER Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-DE1CR90 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-M4L Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221GE-NR Bedienungsanleitung

Supermicro

Supermicro SC847 CHASSIS SERIES Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-N32R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1018R-WR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TR-HTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-421E-1T3N Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung