Supermicro SuperServer 5037C-i Bedienungsanleitung

SUPER

SuperServer 5037C-i

USER’S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: April 22, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 5037C-i. Instal-

lation and maintenance shall be performed by experienced technicians only.

The SuperServer 5037C-i is a single processor system based on the SC731i-300B

mini-tower chassis and the Super X9SCL motherboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

system and describes the main features of the Super X9SCL motherboard and the

SC731i-300B chassis.

Chapter 2: Installation

This chapter describes the steps necessary to setup the system. If your server was

ordered without the processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5037C-i.

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X9SCL motherboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

iii

Preface

when adding or removing processors or main memory and when reconﬁguring the

motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC731i-300B chassis. You should

follow the procedures given in this chapter when installing, removing or reconﬁgur-

ing Serial ATA or peripheral drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: POST Error Beep Codes

Appendix B: System Speciﬁcations

SUPERSERVER 5037C-i User's Manual

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA........................................................................................................1-2

I/O Ports..........................................................................................................1-2

Graphics Controller......................................................................................... 1-2

1-3 Chassis Features............................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Front Control Panel......................................................................................... 1-3

I/O Backplane.................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 System Setup

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Setting Up the System....................................................................................2-2

Checking the Motherboard Setup................................................................... 2-2

Checking the Drive Bay Setup........................................................................ 2-2

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Button....................................................................................... 3-1

POWER........................................................................................................... 3-1

3-3 Control Panel LEDs ........................................................................................3-1

HDD................................................................................................................. 3-1

NIC.................................................................................................................. 3-2

Overheat/Fan Fail ........................................................................................... 3-2

Power On........................................................................................................3-2

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

SUPERSERVER 5037C-i User's Manual

vii

Table of Contents

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Processor and Heatsink Installation................................................................5-2

Installing the LGA1155 Processor .................................................................5-2

Installing an Active Fan CPU Heatsink...........................................................5-5

Removing the Heatsink...................................................................................5-7

5-3 Connecting Cables.......................................................................................... 5-8

Connecting Data Cables.................................................................................5-8

Connecting Power Cables .............................................................................. 5-8

Connecting the Control Panel......................................................................... 5-8

5-4 I/O Ports..........................................................................................................5-9

5-5 Installing Memory.......................................................................................... 5-10

5-6 Adding PCI Cards......................................................................................... 5-12

5-7 Motherboard Details...................................................................................... 5-13

5-8 Connector Deﬁnitions ...................................................................................5-15

ATX Power Connector ............................................................................. 5-15

Processor Power Connector ....................................................................5-15

Power LED ..............................................................................................5-15

HDD LED.................................................................................................. 5-15

NIC1/NIC2 (LAN1/LAN2).......................................................................... 5-16

Overheat (OH)/Fan Fail/Front UID LED................................................... 5-16

Reset Button ...........................................................................................5-16

Power Button ........................................................................................... 5-16

Universal Serial Bus (USB)...................................................................... 5-17

Serial Ports............................................................................................... 5-17

Ethernet Ports .......................................................................................... 5-17

Fan Headers............................................................................................. 5-18

Chassis Intrusion ..................................................................................... 5-18

ATX PS/2 Keyboard and PS/2 Mouse Ports............................................5-18

External Speaker...................................................................................... 5-18

Trusted Platform Module Header............................................................. 5-19

Onboard Power LED................................................................................5-19

Power Supply I2C Connector....................................................................5-19

Wake-On-LAN .......................................................................................... 5-19

T-SGPIO 0/1 Headers..............................................................................5-20

DOM PWR Connector.............................................................................. 5-20

T-SGPIO 1/2 Headers..............................................................................5-20

viii

5-9 Jumper Settings............................................................................................ 5-21

Explanation of Jumpers............................................................................5-21

CMOS Clear............................................................................................. 5-21

VGA Enable/Disable................................................................................. 5-21

PCI Slot SMB Enable...............................................................................5-22

LAN Port Enable/Disable ......................................................................... 5-22

USB Wake-Up .........................................................................................5-22

BMC Enable/Disable................................................................................ 5-22

Watch Dog Enable ................................................................................... 5-22

5-10 Onboard Indicators........................................................................................5-23

LAN1/LAN2 LEDs.....................................................................................5-23

Onboard Standby Power LED ......................................................................................... 5-23

5-11 SATA Drive Connections...............................................................................5-23

SATA Ports ............................................................................................... 5-23

5-12 Installing Drivers............................................................................................ 5-24

Supero Doctor III........................................................................................... 5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Front Control Panel......................................................................................... 6-2

6-3 Front Bezel...................................................................................................... 6-4

6-4 Removing the Chassis Cover .........................................................................6-5

6-5 System Fans................................................................................................... 6-6

6-6 Drive Bay Installation...................................................................................... 6-7

SATA Drives .................................................................................................... 6-7

Installing Drives in the Optional Drive Bays ...................................................6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Event Logs....................................................................................................7-15

7-5 IPMI Conﬁguration (X9SCL-F/X9SCM-F Only).............................................7-16

7-6 Boot Settings .................................................................................................7-18

7-7 Security Settings........................................................................................... 7-19

7-8 Exit Options................................................................................................... 7-20

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

SUPERSERVER 5037C-i User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 5037C-i is a high-end server comprised of two main subsystems:

the SC731i-300B mini-tower chassis and the X9SCL motherboard. Please refer to

our web site for information on operating systems that have been certiﬁed for use

with the SuperServer 5037C-i (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the SuperServer 5037C-i, as listed below:

One 9-cm exhaust fan (FAN-0108L4)

•

Four 3.5" HDD carriers (MCP-220-73101-0B)•

One IDE cable for DVD-ROM drive (CBL-0139L)•

Four SATA cables (CBL-0044L)•

One SuperServer 5037C-i User's Manual•

Optional

One active heatsink (SNK-P0046A4)

•

One intake fan (FAN-0113L4)•

One 5.25" DVD-ROM drive (DVM-LITE-DVDRW-HBT)•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5037C-i User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 5017C-MF lies the X9SCL, a single processor

motherboard based on Intel's C202 chipset. Below are the main features of the

X9SCL (see Figure 1-1 for a block diagram of the chipset).

Processors

The X9SCL supports a single single Intel®Xeon®E3-1200 Series processor or

a CoreTM i3-2100 Series processor in an LGA1155 socket. Please refer to the

motherboard description pages on our web site for a complete listing of supported

processors.

Memory

The X9SCL has four DIMM sockets that can support up to 32 GB of unbuffered

DDR3-1333/1066 memory. Please refer to Chapter 5 for installing memory.

Serial ATA

An on-chip SATA controller is integrated into the X9SCL to provide a six-port, 3

Gb/sec Serial ATA subsystem, which is RAID 0, 1, 5 and 10 supported (RAID 5

supported with Windows OS only). The SATA drives are hot-swappable units. Note:

The operating system you use must have RAID support to enable the hot-swap

capability and RAID function of the SATA drives. Documentation on RAID setup

guidelines can be found on our web site.

I/O Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB

2.0 ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports.

Graphics Controller

The X9SCLfeatures an integratedATI video controller based on the Matrox G200eW

graphics chip, which has 16 MB of DDR2 memory.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 1029P-N32R Bedienungsanleitung

Supermicro

Supermicro AS-2114S-WN24RT Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN10RT Bedienungsanleitung

Supermicro

Supermicro SBI-7127RG-E Bedienungsanleitung

Supermicro

Supermicro FatTwin AS-F1114S-RNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022L-6 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6017R-WTRFTP Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-16C-IP Bedienungsanleitung

Supermicro

Supermicro S-1600 R4 Gebrauchs- und Pflegehandbuch

Supermicro

Supermicro SuperServer SYS-621C-TN12R Bedienungsanleitung

Supermicro

Supermicro SBI-7127R-SH Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220H-TN24R Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-640SP-DE2CR90 Bedienungsanleitung

Supermicro

Supermicro AS-3014TS-i Bedienungsanleitung

Supermicro

Supermicro ASG-1014S-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-3015A-I Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014V-T2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025C-UR Bedienungsanleitung

Supermicro

Supermicro SuperStorage Server SSG-6049P-E1CR60H Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-511R-M Bedienungsanleitung

Supermicro

Supermicro 5015M-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-TR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung