Symbol LS1902-T Betriebsanleitung

BARCODE SCANNER

Programming the LS1902-T & LS2208 for use with

StarShip

These instructions are for the Symbol LS1902-T & LS2208 Barcode scanner

ONLY!

The following instructions will allow the user to scan a bar-coded

Invoice\Order number into Starship and automatically “press” the Enter key.

Repetitive keystrokes such as SAVE, DEFER, REPEAT, and NEXT can

also be programmed. These repetitive keystrokes can be scanned using the

preprinted Barcodes at the end of these instructions.

You must tell the scanner what kind of keyboard connection you are using

by scanning the appropriate Barcode on the following page. Connect the

scanner to the PC and Keyboard while the PC is on (see page 1-6 of the

Online Manual for connection instructions). IMPORTANT: The keyboard

will be disabled until you scan one of the Barcodes on the next page.

The “ENTER” command must be programmed before any of the other

commands are entered. To program a command, “scan” each barcode in

order on that page. If you do not hear a beep or series of beeps, the scanner

did not read the barcode. Try scanning the barcode at different angles until

you hear the beep(s). If you make a mistake, scan the last barcode on that

page and start at the beginning of that page again. To reset the scanner back

to Factory Defaults scan this barcode:

“ENTER” Command

Scan these barcodes FIRST in order 1 through 10. If you make a mistake

just scan number 10 and start over at number 1. This command allows you to

scan an Invoice/Order number with an “Enter” command at the end.

IMPORTANT: Do not program an “Enter” command into your

Invoice\Order number Barcode.

SAVE

Scan these barcodes in order 1 through 11. If you make a mistake, scan the

last barcode and start again. The “SAVE” Barcode allows you to scan the

“SAVE” command in without using the keyboard or mouse. The “SAVE”

barcode can be found at the end of these instructions and should be posted in

a convenient place

DEFER

Scan these barcodes in order 1 through 12. If you make a mistake, scan the

last barcode and start again. The “DEFER” Barcode allows you to scan the

Defer command without using the keyboard or mouse. The “DEFER”

Barcode can be found on the last page of these instructions.

NEXT

Scan these barcodes in order 1 through 12. If you make a mistake, scan the

last barcode and start again. The “NEXT” Barcode allows you to enter

multiple packages without clicking on the Next button in Starship. The

“NEXT” Barcode can be found on the last page of these instructions.

REPEAT

13)

Scan these barcodes in order 1 through 13. If you make a mistake, scan the

last barcode and start over. The “REPEAT” barcode allows you to repeat the

package “x” amount of times (x being the number of packages) The

“REPEAT” barcode can be found on the last page of these instructions.

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Symbol Barcode-Lesegerät Handbücher

Symbol

Symbol Phaser P460 Bedienungsanleitung

Symbol

Symbol SYMBOL MS120XFZY Bedienungsanleitung

Symbol

Symbol P360 Bedienungsanleitung

Symbol

Symbol LS 2104 Betriebsanleitung

Symbol

Symbol LS 4208 Bedienungsanleitung

Symbol

Symbol LS 3070 Installations- und Betriebshandbuch

Symbol

Symbol Keychain Barcode Scanner Bedienungsanleitung

Symbol

Symbol LS 7708 Bedienungsanleitung

Symbol

Symbol SE955 Kurzanleitung zur Einrichtung

Symbol

Symbol DS3408-SF20005R Bedienungsanleitung

Symbol

Symbol LL 425 Bedienungsanleitung

Symbol

Symbol LS 1006 Installations- und Betriebshandbuch

Symbol

Symbol MC9090-G RFID Bedienungsanleitung

Symbol

Symbol LS4000P Series Installations- und Betriebshandbuch

Symbol

Symbol SYMBOL DS6707 Installations- und Betriebshandbuch

Symbol

Symbol LS 4208 Bedienungsanleitung

Symbol

Symbol LS1203 Bedienungsanleitung

Symbol

Symbol P 470 RF Bedienungsanleitung

Symbol

Symbol Cyclone M2004-I200 Bedienungsanleitung

Symbol

Symbol LS 4208 Bedienungsanleitung

Symbol

Symbol Symbol DS6708 Bedienungsanleitung

Symbol

Symbol LS 9208 Handbuch

Symbol

Symbol LS3578-FZ - Symbol - Wireless Portable Barcode... Bedienungsanleitung

Symbol

Symbol MicroKiosk MK1000 Installations- und Betriebshandbuch

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung