Tab T9-Pro Betriebshandbuch

Model:

T9-Pro

Product User Manual

Please read this manual carefully before use

The company reserves the right to interpret the manual

The appearance of the product is subject to the real product

Please keep it properly with the invoice after reading it

In case of product technology or software upgrade, there shall not be prior notice

Packing list

Ground cleanser x1

（Be suitable for cleaning

all kinds of ground stains）

Cleaning tool x1

（Be suitable for cleaning residual stains in

dirty-water tank of floor scrubber

and hair wound by the rolling brush）

Rolling brush x2 Adaptor x1

Main unit x1

Filter x1 Screwdriver x1

Charging base assembly A x1

Charging base assembly B x1

Screw x4

Accessories of main unit

Before using this product, please check whether the package contains the following items.

Please contact our customer service for any missing.

The pictures are for reference only. Please refer to the real product received.

Contents

Safety instruction　　　　　　　　　　　　　1

Product Introduction　　　　　　　　　　3

Product Installation　　　　　　　　　　　4

How to Use　　　　　　　　　　　　　7

Product Maintenance　　　　　　　　　 11

Product Parameters/Description

of hazardous substances in the product　 13

Failure Recovery　　 14

Warranty Card/Warranty Terms　　　 15

Safety instruction

1. This product is only used on indoor surfaces. It is forbidden to install, charge and use

this product outdoors, in bathrooms and around swimming pools.

2.This product may not be used by people with physical, sensory or intellectual disabilities

and people without relevant experience and knowledge (including children), unless there

is a guardian’s care or guidance to ensure that they can use this product safely.

3. Please do not let children use this product as a toy.

4. Please do not touch the plug or any live parts of the product with wet hands to avoid

electric shock.

5. Please do not move this product from the power cord or other cables, otherwise it may

cause danger.

6. If the charger or plug is damaged, please stop using it. Please call the professional

maintenance personnel of our company to replace it, so as to avoid harm.

7. When using, if leakage or excessive motor temperature and abnormal sound are found,

such as overheating of the unit, abnormal sound, peculiar smell and weak suction, please

immediately stop using it and call our professional maintenance personnel.

8. When charging, please use the charger specially designed by our company for

charging. Other types of chargers may cause battery failure or extreme thermal effect.

9. If this product is not used for a long time, please turn off the power supply and unplug

the charging socket.

10. Please do not use this product near or on the surface of inflammable and explosive

objects, which may lead to fire and explosion.

11. Please do not use this product near the working fireplace or heater to prevent the

machine shell from being deformed.

12. Please do not use this product to absorb high-temperature substances (unlit cigarette

butts, matches or hot ashes, etc.), superfine substances (such as lime, cement, wood

chips, gypsum powder, ashes and carbon powder, etc.), sharp fragments (such as glass,

nails and pins, etc.), dangerous goods (such as solvents and detergents, etc.), chemical

substances (such as acid substances and detergents, etc.), flammable and explosive

liquids (gasoline, alcoholic products) and other substances with uncertain physical

characteristics.

13. Shoe polish, paint, pigment and other stains with strong grease, strong stickiness or

strong dyeability are not within the scope of use of this product.

Safety instruction

14. Please clean according to the instructions of the detergent. If a large amount of clean-

ing solution is added, more foam will be generated during use, which may penetrate into

the motor and cause danger. It is recommended to use the detergent produced by our

company and the manufacturer approved by our company, and it must not contain acid,

alkali solution or substances harmful to the environment.

15. Please keep the detergent out of the reach of children. If the cleaning solution

accidentally enters the eyes, rinse thoroughly with clean water; if you accidentally eat, you

should seek medical attention immediately.

16. Please do not disassemble the closed machine by yourself. There are no parts in the

machine that customers can repair by themselves, and do not try to change the perfor-

mance of the machine, otherwise it will lead to danger.

17. Please do not use the voltage that does not correspond to the specifications of this

product, otherwise it will damage the motor, and it is more likely to hurt the users.

18. Please do not shake the machine up and down or collide violently, and do not tilt the

machine to one side or lay flat to prevent sewage from flowing into the motor.

19. The main body and floor brush of this product contain electrical components, which

should not be soaked in water or washed, otherwise fire and electric shock accidents may

occur due to short circuit of the machine.

20. It is forbidden to use this product without installing the rolling brush, clean-water tank,

dirty-water tank and filter element.

21. Please make sure to replace the rolling brush after turning off the machine.

22. After using the machine, please clean up the dirty-water tank in time to keep the

ventilation path unblocked, so as to avoid the suction drop and motor heating caused by

blockage, thus affecting the service life of the machine.

23. After using the machine, please keep it in a dry place. Humid places will affect the

insulation and service life of electrical appliances.

24. In order to prevent tripping, the machine should be placed against the wall after use.

25. Please check the smoothness of the suction nozzle regularly. If there is any blockage,

please clear it in time, so as to avoid the decrease of suction caused by blockage and

affect the service performance of the machine.

26. When the machine breaks down, please do not repair it yourself. Please call the

after-sales department of our company for help.

Product Introduction

Main unit

ON/OFF button

Display screen

Self-cleaning button

Dirty-water tank

release button

Dirty-water tank

Dirty-water tank handle

Front rolling brush cover

Front rolling brush

cover release button

Front rolling brush

Rear rolling brush cover

Rear rolling brush

Rear rolling brush cover

release button

Clean-water tank

release button

Clean-water tank

Tube

Mode button

Voice button

Clean-water tank handle

1.Handle installation and disassembly

1.1 Installation：

Insert the end of the handle assembly

vertically into the port on the top of the

body according to the direction shown in

the figure, and the it is successfully.

1.2 Disassembly：

Firstly take down the clean-water tank,

then put a pen-like hard object into the

hole on the back of the body to press

the shrapnel, and pull out the handle of

the main unit upwards at the same.

2. Installation of charging base:

Insert the charging base assembly B into the card slot of the charging base assembly

A, and fix it with 4 screws on the back of the assembly A; if it is needed to disassemble,

please unscrew the screw to separate the upper and lower parts.

Product Installation

Click

Product Installation

3. Clean-water tank installation and disassembly

3.2 Disassembly：

Hold the machine body with one hand

and press the button of the clean-water

tank with the other hand, and then pull it

out to take out the tank..

3.1 Installation：

Firstly, put the bottom of the clean-water

tank into the opening support position of the

machine body, then gently push the

clean-water tank, and it is successfully

installed after hearing the click sound.

Click

4.Dirty-water tank installation and disassembly

4.2 Disassembly：

Hold the machine body with one hand

and press the button of the dirty-water

tank with the other hand, and then pull it

out to take out the tank.

4.1 Installation：

Firstly, put the bottom of the dirty-water tank

into the opening support position of the

machine body, then gently push the

dirty-water tank, and it is successfully

installed after hearing the click sound.

Product Installation

5.Installation and disassembly of rolling brush cover

5.1 Installation of the rolling brush cover: press down the protrusion corresponding to

the notch of the rolling brush cover and it is successfully installed after hearing the click

sound (as shown in Figure 1).

5.2 Disassembly of the rolling brush cover: press the center of the button on the front

rolling brush cover, the rolling brush cover will automatically pop up and take out the

rolling brush cover (as shown in Figure 2).

5.3 The installation and disassembly of the front and rear covers of the rolling brush are

consistent.

6.Installation and disassembly of rolling brush assembly

6.1 Installation of rolling brush assembly: hold the handle of the rolling brush by hand,

firstly align the right end of the rolling brush with the rolling brush shaft, then put the left

handle of the rolling brush into the groove, and then install the rolling brush cover (as

shown in Figure 1).

6.2 Disassembly of rolling brush assembly: firstly remove the rolling brush cover, then

pull up the left rolling brush handle by hand, and then pull it out to the left to remove it

(as shown in Figure 2).

6.3 The installation and disassembly of the rolling brush are consistent.

6.4 Rolling brush A is correspondingly installed to the letter A side of the floor brush,

and rolling brush B is correspondingly installed to the letter B side of the floor brush.

Click

1.Water injection of clean-water tank

1.1 Hold down the disassembly button of the clean-water tank and remove the

clean-water tank (as shown in Figure 1).

1.2 Turn the bottom of the clean-water tank upward, open the clean-water tank cover,

and inject clean water. Different water levels can be selected according to the clean

area. If deep cleaning is required, it is recommended to add the specified cleanser in

proportion (as shown in Figure 2).

1.3 Cover the clean-water tank cover and make sure it is in place (as shown in Figure

3).

1.4 Tilt the clean-water tank, firstly put the bottom in place, and then push it inward to

ensure that it is installed in place (as shown in Figure 4).

How to Use

Click

12 3 4

Note:

·Please do not add non-designated cleanser or disinfectant to avoid corrosion of the

machine.

·Please add special cleanser according to the specified proportion, and do not add too

much.

·Please do not add hot water over 60℃ to avoid deformation of the clean-water tank.

* Tip: Please try to complete a complete charging and discharging process before using

the product to ensure the accuracy of the electric quantity program.

Inhaltsverzeichnis

Andere Tab Staubsauger Handbücher

Tab

Tab T6-Pro Betriebshandbuch

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung