Technoline WS 9032 Bedienungsanleitung

Stand

LCD Display

Function keys

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of

innovative design and uality piece of engineering. Providing radio controlled time, date,

calendar, Moon phase, indoor and outdoor temperature, indoor and outdoor relative

humidity, and air pressure history information. This unit will never keep you guessing on

current and future weather conditions. Operation of this product is simple and

straightforward. By reading this operating manual, the user will receive a better

understanding of the Weather Station together with the optimum benefit of all its features.

FEATURES:

The Weather Station

• DCF Radio controlled time with manual setting option

• Time reception ON/OFF (user selectable)

• 12/24 hour time display

• Time zone option ±12 hours

Battery

compartment

Hanging hole

« Instant Transmission » is the up and coming state-of-the-art new wireless

transmission technology, exclusively designed and developed by LA

CROSSE TECHNOLOGY.

“IT ” offers you an immediate update of all your outdoor data measured

from the transmitters: follow your climatic variations in real-time!

• Weekday and day calendar display (year and month only in setting mode)

• Alarm setting with snooze function

• Display 12 Moon phases throughout the year

• Weather forecasting with weather tendency indicator

• Indoor comfort indicator

• Temperature display in ºC/ºF

• Indoor and outdoor temperature display with MIN/MAX records and time of reception

• Humidity data display as RH%

• Indoor and outdoor humidity display with MIN/MAX records

• Relative air pressure hPa/ inHg with adjustable reference value

• Weather icon sensitivity setting

• Relative air pressure history for the past 24 hours (electronic barometer with

barometric pressure trend)

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• LCD contrast selectable

• LED back light

• Low battery indicator

• Table standing or wall mounting

Thermo-Hygro Transmitter

• Remote transmission of outdoor temperature and humidity to

weather station by 868 MHz signals

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. To

install and replace the batteries, please follow the steps

below:

1. Insert finger or other solid object in the space at the

bottom center of the battery compartment and lift up to

remove the cover.

2. Insert batteries observing the correct polarity (see

marking).

3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO

TRANSMITTER

The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6, 1.5V batteries. To

install and replace the batteries, please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery cover.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following

the setting up procedures. This is due to a random security code assigned by the transmitter

at start-up. This code must be received and stored by the Weather Station in the first 3

minutes of power being supplied to the transmitter.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum

accuracy of these units.

Please participate in the preservation of the environment. Return used

batteries to an authorized depot.

SETTING UP

1. First, insert the batteries to the transmitter (see “How to install and replace batteries

in the Temperature transmitter” below).

2. Within 2 minutes of powering up the transmitter, insert the batteries to the Weather

station (see “How to install and replace batteries in the Weather station” below).

Once the batteries are in place, all segments of the LCD will light up briefly. Then the

indoor temperature and humidity, the time as 0:00 the date as SA.1., the weather icons

(sun and clouds) will be displayed. If the indoor temperature and humidity are not

displayed after 15 seconds, remove the batteries and wait for at least 1 minute before

reinserting them. Once the indoor data is displayed proceed to next step.

3. After the batteries are inserted, the Weather station will start receiving data signal from

the transmitter. The outdoor temperature and humidity should then be displayed on the

weather station. If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

Weather station and the transmitter (see notes on “Positioning” and “868 MHz

Reception”).

Note: This weather station will receive one outdoor transmitter only.

RESETTING

The Weather Station and the Thermo-hygro transmitter need to be reset when one of the

following conditions occur:

•

Unsuccessful 868MHz signal reception.

•

Malfunction on the units.

•

Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1 minute before powering

up the Weather station again. Proceed from step 1 in “Setting Up”.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by the

Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less

than one second in one million years. The time is coded and transmitted from Mainflingen

near Frankfurt via fre uency signal DCF-77 (77.5 kHz) and has a transmitting range of

approximately 1,500 km. Your radio-controlled Weather Station receives this signal and

converts it to show the precise time in summer or wintertime.

The uality of the reception depends greatly on the geographic location. In normal cases,

there should be no reception problems within a 1500km radius of Frankfurt.

IN key OUT/+ key

ALM/DATE key

SET key

SNOOZE/CH key

DCF reception is done twice daily at 02:00 and 03:00 am. If the reception is not successful at

03:00 am, then the next reception takes place the next hour and so on until 06:00am, or until

the reception is successful. If the reception is not successful at 06:00 am, then the next

attempt will take place the next day at 02:00 am.

Once the outdoor data reception test period is completed, the DCF tower icon in the clock

display will start flashing in the upper left corner. This indicates that the clock has detected

that there is a radio signal present and is trying to receive it. When the time code is received,

the DCF tower becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,

then please take note of the following:

• Recommended distance to any interfering sources like computer monitors or TV sets is

a minimum of 1.5 - 2 meters.

• Within ferro-concrete rooms (basements, superstructures), the received signal is

naturally weakened. In extreme cases, please place the unit close to a window and/ or

point its front or back towards the Frankfurt transmitter.

• During nighttime, the atmospheric disturbances are usually less severe and reception

is possible in most cases. A single daily reception is ade uate to keep the accuracy

deviation below 1 second.

FUNCTION KEYS:

Weather Station:

The Weather Station has 5 easy to use function keys:

SET key

• Press and hold the key to enter manual setting modes: LCD contrast, time zone, time

reception ON/OFF, 12/24 hour display, manual time setting, calendar, temperature

°C/°F, pressure hPa/inHg, relative pressure value, and weather icon sensitivity setting

• Reset all MIN/MAX records

• Stop the alarm during alarm ringing

• Stop snooze mode

• Back-light on

ALM/DATE key

• Press and hold key for 3 seconds to enter the alarm setting mode

• Active/de-active the alarm time

• Stop the alarm during alarm ringing

• Stop snooze mode

• Display date

• Back-light on

IN key

• Press to toggle between MAX/MIN and current indoor temperature/humidity data

• Press to set the alarm hour (inside alarm setting mode)

• Decrease relative pressure value (within manual set mode)

• Stop the alarm during alarm ringing

• Stop snooze mode

• Back-light on

OUT/ key

• Press shortly to toggle between MAX/MIN and current outdoor temperature/humidity

data

• Increase, change, toggle all values in manual set mode

• Press to set the alarm minute (inside alarm setting mode)

• Stop the alarm during alarm ringing

• Stop snooze mode

• Back-light on

SNOOZE/CH key

• Active snooze function during alarm ringing

• Exit the manual set mode and alarm setting mode

• Back-light on

LCD SCREEN

The LCD screen is split into 4 sections displaying the information for

time/calendar/alarm/moon phase, indoor data, weather forecast and outdoor data.

* When the signal is successfully received by the Weather Station, the outdoor transmission

icon will be switched on. (If not successful, the icon will not be shown on LCD). The user can

then easily see whether the last reception was successful (icon on) or not (icon off). On the

other hand, the short blinking of the icon shows that a reception is currently taking place.

MANUAL SETTINGS:

The following manual settings can be changed when pressing the SET key for:

• LCD contrast setting

• Time zone setting

• Time reception ON/OFF setting

• 12/24-hour format setting

• Manual time setting

• Calendar setting

• °C/°F temperature setting

• hPa / inHg pressure setting

• Relative air pressure setting

• Weather forecasting icon sensitivity setting

LCD CONTRAST SETTING:

Last digit flashing

Moon phase icon

Weather tendency

indicator

Calendar or alarm time

Indoor relative

humidity in RH%

Time reception icon

(for DCF time)

Indoor temperature

in ºC/ ºF

Weather forecast icon

Outdoor data signal

reception indicator*

Outdoor temperature

in ºC/ ºF

Outdoor relative

humidity in RH%

Comfort indicator icon

Relative air pressure

history bar graph

Relative air pressure

in hPa / inHg

Time

Low battery

indicator

The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 4):

1. Press and hold the SET key until the digit starts flashing.

2. Use the OUT/+ key to view all levels of contrast.

3. Select the desired LCD contrast. Confirm with the SET key and enter in the Time Zone

setting.

TIME ZONE SETTING:

The time zone default of the Weather Station is “0”. To set a different time zone:

1. The current time zone value starts flashing.

2. Use the OUT/+ key to set the time zone. The range runs from 0 to -12 and then runs

from +12 back to 0 in consecutive 1-hour intervals.

3. Confirm with the SET key and enter the Time reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

In area where reception of the DCF time is not possible, the DCF time reception function can

be turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).

1. The digit “ON” will start flashing on the LCD.

2. Use the OUT/+ key to turn OFF the time reception function.

3. Confirm with the SET key and enter the 12/24-hour format setting.

Note:

If the Time Reception function is turn OFF manually, the clock will not attempt any

reception of the DCF time as long as the Time Reception OFF function is activated.

The time reception icon and the “DCF” icon will not be displayed on the LCD.

12/24-HOUR FORMAT SETTING:

The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-

Hour)

1. Use the OUT/+ key to toggle between “12H” or “24H”.

2. Confirm with the SET key and enter the Manual time setting.

MANUAL TIME SETTING:

In case the Weather Station cannot detect the DCF-signal (for example due to disturbances,

transmitting distance, etc.), the time can be manually set. The clock will then work as a

normal Quartz clock.

Flashing

Hour flashing

Minutes flashing

Flashing

1. The hour digit will start flashing.

2. Use the OUT/+ key to set the hour.

3. Press again the SET key to set the minutes. The minute digits start flashing.

4. Use the OUT/+ key to set the minutes.

5. Confirm with the SET key and enter the Calendar setting.

Note:

The unit will still try and receive the signal despite it being manually set. When it does

receive the signal, it will change the manually set time into the received time. During

reception attempts the DCF tower icon will flash. If reception has been unsuccessful, then

the DCF tower icon will not appear but reception will still be attempted the following day.

CALENDAR SETTING:

The date default of the Weather station is 1. 1. 2006. Once the radio-controlled time signals

are received, the date is automatically updated. However, if the signals are not received, the

date can also be set manually.

1. The year starts flashing.

2. Use the OUT/+ key to set the year (between year 2003-2029).

3. Press the SET key again to confirm and to enter the month setting. The month starts

flashing.

4. Use the OUT/+ key to set the month.

5. Press the SET key again to confirm and to enter the date setting mode. The date starts

flashing.

6. Use the OUT/+ key to set the date.

Confirm all calendar settings with the SET key and enter the Temperature unit

setting.

°C/°F TEMPERATURE SETTING:

The temperature display can be selected to show temperature data in °C or °F (Default °C).

1. Use the OUT/+ key to toggle between “°C” or “°F”.

Confirm with the SET key and enter the Air pressure unit setting.

hPa / inHg PRESSURE UNIT SETTING:

The pressure display can be selected to show relative air pressure in hPa or inHg ( default is

“hPa”).

Year

Date and month (24hr time format)

Month and date (12hr time format)

Flashing

1. Use the OUT/+ key to toggle between “hPa” or “inHg” unit

2. Confirm with the SET key and enter the Relative air pressure value setting.

Note: Units of weather icon sensitivity and air pressure history are not affected. They are

always expressed in hPa.

RELATIVE AIR PRESSURE VALUE SETTING

The default relative pressure value is 1013 hPa (29.92 inHg). This can be manually set to

another value within the range of 960 – 1040 hPa (28.35 – 30.72 inHg) for a better reference.

1. The current relative pressure value will start flashing

2. Use the OUT/+ key to increment and IN key to decrement the value. Keep holding the

key allows the value to advance faster.

3. Confirm with the SET key and enter the Weather forecast icon sensitivity setting.

WEATHER FORECASTING ICON SENSITIVITY SETTING:

For locations with rapid changes of weather conditions, the weather icons sensitivity can be

set to a different level for faster display of weather conditions.

1. The current sensitivity value will start flashing.

2. Use the OUT/+ key to set the weather sensitivity level. There are 3 levels of setting: 2,

3 and 4. The value corresponds to the change of air pressure in hPa before the

weather icon will switch to another state. Level 2 is the most sensitive setting, level 4 is

the slowest recording setting (default setting is "3").

3. Confirm with the SET key and exit the Manual settings.

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting mode anytime during the manual setting, press the SNOOZE/CH

key or wait for automatic timeout. The mode will return to normal time display.

ALARM SETTING:

Alarm icons

Alarm time

Flashing

The alarm time can be set when pressing the ALM/DATE key.

1. Press and hold the ALM/DATE key to enter the alarm set mode. The alarm digits flash.

2. Use the IN key to set the alarm hour.

3. Use the OUT/+ key to set the alarm minute.

4. Confirm with SNOOZE/CH key and exit the Alarm setting. The icon ((●)) will be

displayed along with the set alarm time.

Note:

If the calendar is displayed in the Weather station, the alarm is NOT active.

To view and active the alarm, press the ALM/DATE key. The alarm icon and the alarm time

will be displayed, indicating that the alarm setting is activated.

The maximum alarm ring duration is 2 minutes.

SNOOZE SETTING AND STOPPING THE ALARM:

10 minutes snooze function can be set when the alarm is ringing by pressing the

SNOOZE/CH key.

When the alarm is snoozing, the alarm icon ((•)) will remain flashing indicating that the alarm

is active but is in Snooze mode. To stop the snooze function when it is in snooze period,

press any key except the SNOOZE/CH key.

To stop the alarm, press any key during alarm ringing, except the SNOOZE/CH key.

MOON PHASES SYMBOL

The Moon icon of the Weather station will also display all 12 Moon phases throughout the

year according to the set calendar.

INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:

The indoor temperature and humidity data, the indoor comfort indicator are automatically

updated and displayed on the second section of the LCD.

THE COMFORT LEVEL INDICATOR:

Comfortable : A happy face icon “☺” indicating a temperature level between 20°C and

25.9°C and relative humidity reading between 45% and 65%.

Uncomfortable : A sad face icon “” indicating any value outside the comfortable range.

Indoor relative

humidity in RH%

Indoor temperature

in °C or ºF

MAX icon

New Moon

Small Waxing

Crescent

Large Waxing

Crescent

First Quarter

Small Waxing

Gibbous

Large

Waxing

Gibbous

Small Waning

Crescent

Large Waning

Crescent

Last Quarter

Small Waning

Gibbous

Large

Waning

Gibbous

Full Moon

Inhaltsverzeichnis

Andere Technoline Wetterstation Handbücher

Technoline

Technoline Mobile Alerts MA 10920 Bedienungsanleitung

Technoline

Technoline WS6447 Bedienungsanleitung

Technoline

Technoline WT 221 Bedienungsanleitung

Technoline

Technoline WS6462 Bedienungsanleitung

Technoline

Technoline WS 6820 Bedienungsanleitung

Technoline

Technoline WS 6750 Bedienungsanleitung

Technoline

Technoline WS 6448 Bedienungsanleitung

Technoline

Technoline WT 245 Bedienungsanleitung

Technoline

Technoline WS 9065 Bedienungsanleitung

Technoline

Technoline WS-9632-IT Bedienungsanleitung

Technoline

Technoline WS 6445 Bedienungsanleitung

Technoline

Technoline WS 9900 Bedienungsanleitung

Technoline

Technoline WS 6830 Bedienungsanleitung

Technoline

Technoline WS9470 Bedienungsanleitung

Technoline

Technoline WS 9178 Bedienungsanleitung

Technoline

Technoline WS 6830 Bedienungsanleitung

Technoline

Technoline WS 9767 Bedienungsanleitung

Technoline

Technoline WS 6449 Bedienungsanleitung

Technoline

Technoline WS 9215 Bedienungsanleitung

Technoline

Technoline WS 9422 Bedienungsanleitung

Technoline

Technoline WS 9170 Bedienungsanleitung

Technoline

Technoline WS7073 Bedienungsanleitung

Technoline

Technoline WS6767 Bedienungsanleitung

Technoline

Technoline WS 7018 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Renkforce

Renkforce 1208067 Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung