Tecnosicurezza DigiTech Bedienungsanleitung

DigiTech

User Instructions

2 of 16 IU_ DigiTech_04

User instructions

DigiTech

Company

Founded in 1983 with the aim of providing a complete range of professional products,

Tecnosicurezza is now a consolidated reality in the field of locks and security systems for safes.

The experience gained in over 35 years of activity in the security sector has allowed the

designing and manufacturing of high technology and reliability systems, which continue to

receive the approval of an increasingly demanding clientele.

TECNOSICUREZZA is present directly on the Italian, Spanish and US markets and, through a

extensive distribution network, in many European and extra-European countries.

TECNOSICUREZZA is aimed at national and international customers of primary importance, such

as banks, safe manufacturers, cash in transit companies, mass market retailers and post offices.

Today TECNOSICUREZZA is a leading company focused on the customers’ needs and

constantly in step with technology.

 
 
 
 
IU_DigiTech_04 3 of 16 
User instructions 
DigiTech 
 
Table of contents 
COMPANY 2 
TABLE OF CONTENTS 3 
IMPORTANT NOTES! 4 
GENERAL INFORMATION 5 
OVERVIEW FUNCTIONS 7 
LOCK OPENING 8 
PRE-SETUP MODE 8 
MANAGER (01) AND USERS (02-29): 8 
OVERRIDE USER (30) 8 
CODE CHANGING 9 
USER MANAGEMENT 9 
LOCK SETUP 10 
SETUP WITH DALLAS KEY 10 
SETUP WITH PC 10 
TEST MODE 10 
KEYPAD LANGUAGE 11 
AUDIT 11 
EVENTS CHECK ON LCD 11 
DOWNLOAD THE AUDIT ON A DALLAS KEY 12 
DOWNLOAD AUDIT ON PC 12 
FIRMWARE VERSION 12 
CONTRAST ADJUSTMENT 13 
TIME DELAY 13 
TIME, DATE AND DST SETTINGS 13 
TIME &DATE SETTINGS 13 
DST SETTINGS 14 
CONTACTS 16 
 

4 of 16 IU_ DigiTech_04

User instructions

DigiTech

Important notes!

•Before installing this product, please read carefully the installation and operating

instructions.

•Locks have been designed to correctly operate in a temperature range from -5°C to +

50°C and and in an environment with non-condensing humidity between 25% and 90%.

•The lock must not be oiled/lubricated/greased.

•If installed in normal domestic or office environments, the locks do not require particular

maintenance; in any case, after 10,000 opening/locking cycles, it is recommended to run

a test that verifies the correct and complete operation of the product.

•Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1.5

Volt Alkaline batteries. Alternatively, it is possible to use a 12VDC - 1A power adapter

(p.n. N1212) with relative power supply interface (p.n. T6005/W or p.n. T6005).

•Una serie di segnalazioni acustiche durante l’apertura indicano un livello di batteria

basso. La batteria deve essere in tal caso sostituita.

•It is strongly recommended to change the default codes before the usage and to keep

safely the new codes.

•Do never use codes easy to be guessed such as 123456, birth dates or others, based on

own personal information.

•After changing a code, perform several opening/closing tests before closing the door.

Should the lock label be removed, warranty is void.

IU_DigiTech_04 5 of 16

User instructions

DigiTech

General information

Using your keypad

•Press any button to power up the keypad. LCD which shows:

ENTER CODE

X X –X X X X X X

If the lock is in pre-setup mode, LCD shows:

PRESS 1 TO OPEN

•To enter a code, power up the LCD and enter the corresponding

digits.

•LCD automatically switches OFF if no buttons are pressed

within 30s.

•To scroll the menu, press .

•To confirm an operation, press .

•To leave a menu or come back to the main menu, scroll the

functions until “EXIT?” and press .

•To enter a code plus Dallas key (if set), enter the code digits and

insert the Dallas key in the keypad reader.

•To enter a user provided with Dallas key only (if set), insert the

Dallas key in the keypad reader. LCD shows:

DALLAS USER

•To start a time delay counting (if set), enter a code. LCD shows:

TIME DELAY

00:59

•To stop a time delay counting, press and then confirm with

STOP DELAY

COUNTING?

After the time delay counting, LCD shows open window

counting:

Press and enter a code for opening.

OPEN WINDOW

00:01

6 of 16 IU_ DigiTech_04

User instructions

DigiTech

•If a wrong code is entered, LCD displays the message:

WRONG CODE

•To open or access the menu in dual mode (if set), enter the first

code. LCD shows:

Then, enter the second code.

ENTER 2° CODE

X X –X X X X X X

Shortcuts

Press and hold for 2 seconds the button related to the needed function:

= Change Manager code (01), users (02-29) and override users (30)

= Users management

= Lock setup with Dallas key

= Test mode

= Change language

= Audit/Events check

= System info/Time and date view/Contrast adjustment

= Time delay and opening window

= Exit and back to the main menu

= Time and date settings/Automatic DST/PC link

IU_DigiTech_04 7 of 16

User instructions

DigiTech

Pre-setup & Configurations

When the lock is in pre-setup mode and connected with the keypad for the first time:

•lock can be simply opened by pressing the button 1. When the bolt is open, the output

connector BAT is enabled;

•only the following options are allowed: Test mode, Language selection,

PC Link, Events check, Time and date view, System information view, Contrast

adjustment.

Through the PC connection and the software DigiTech Setup, the lock can be set according

different configurations, involving the number of users, the dual mode opening and the

Manager management.

User properties and default codes

Users can be set for opening with code only, code + Dallas key or with Dallas key only. It is also

possible to set a dual mode opening: in this case, entering the two users codes is required to

open the lock.

Default codes are:

Manager: 01-123456.

Users from 02 to 29: 02-020202, 03-030303…..and so on. They always open with time delay if

set.

Override user 30: 30-303030. He always opens without time delay.

This user manual describes the standard programming. According such programming and unless

different requests while ordering the product, an opening can be performed by entering single

users codes (no dual mode) and without time delay. Thus, the user manual must be adapted

according the configuration selected.

It is strongly recommended to change the default codes before using the lock.

Overview functions

Lock opening

After entering an opening code, it is possible to open the lock within 3 seconds. It’s no necessary

instead with motorized locks: in this case indeed, the motor moves the bolt which remains in

opening position for about 8 seconds before returning in closing position. In the manual closing

version instead, the bolt can be closed by pressing key for few seconds.

Penalty

Four consecutive wrong codes initiate a four minutes penalty time. During this period, LCD

shows the message “ LOCK PENALTY” and no operation is allowed.

8 of 16 IU_ DigiTech_04

User instructions

DigiTech

Time Delay

Programmable time delay in between 0 and 99 minutes. Programmable opening window in

between 1 and 19 minutes.

Dallas keys

Available as option for Manager and users.

Power supply

Lock can be powered with:

•an ALKALINE 9V battery located in the battery compartement below the keypad;

•an internal battery box provided by Tecnosicurezza (6 ALKALINE 1.5 batteries);

•A power adapter (ref. N1212) with power supply interface (ref. T6005/W or T6005) both

provided by Tecnosicurezza.

Low battery warning

A long beep together with the message “LOW BATTERY” on the display, indicate a low battery

level which need immediate replacing.

Audit

The lock is able to save the last 5500 operations with time, date, user and operations

description.

IMPORTANT

Some options/characteristics reported in this user manual, can only be used if previously

enabled through the setup software. Thus, please refer to the user manual

IU_DigiTech_setup_XX.

Please contact Tecnosicurezza for further information.

Lock opening

Pre-setup mode

Power up the keypad. The Display shows:

Press to open the lock.

PRESS 1

TO OPEN

Manager (01) and users (02-29):

Power up the keypad and enter an opening code. LCD shows:

OPEN

Override user (30)

Power up the keypad and enter an override user code code (enter also

the Dallas key if set). LCD shows:

OPEN

Open the lock within 3 seconds.

IU_DigiTech_04 9 of 16

User instructions

DigiTech

Code changing

WARNING: it is recommended to always perform this operation with door open.

Manager (ID 01), users (ID 02-29) and override user (ID 30)

Power up the keypad. Press and hold . LCD shows:

ENTER OLD CODE

X X –X X X X X X

Enter the old code and insert the Dallas key in the reader (if set).

LCD shows:

ENTER NEW CODE

X X X X X X

Enter the new code. LCD shows:

CONFIRM CODE

X X X X X X

Confirm the new code.

User management

Power up the keypad. Press and hold . LCD shows:

USERS MANAGEMENT

0 1 –X X X X X X

Enter Manager code. LCD shows:

02 03 04 05 06

✓x _ _ ✓

Press to scroll users list or enter user ID.

“ ” user installed, “_” user deleted, “X” user disabled.

The overide user (30) can only be installed when the bolt is open.

Press . If the user is not installed LCD shows the message:

INSTALL?

“ ” Dallas key, “ ” code, “+” dual mode, “TL” time lock

Press to confirm or to exit or for switching to the next user.

Enter the new user code and confirm it. LCD shows:

OPERATION DONE

If the selected user is already installed, press to choose whether

to disable it, to delete it or for leaving and selecting another user.

Press to confirm the choice.

10 of 16 IU_ DigiTech_04

User instructions

DigiTech

Lock setup

Lock setup can be performed through a Dallas key properly programmed or through a direct

PC link. In both cases, lock must be in pre-setup mode (press 1 to open it).

Setup with Dallas key

Power up the keypad. Press and hold . LCD shows:

SYSTEM SETUP

Insert the setup Dallas key in the reader and connect the reader with

the keypad by means of the jack connector. LCD shows:

08:00 FRI

27/01/2019

Check time and date. Press to confirm or to update the values.

Then, press again to confirm. LCD shows:

CONFIGURAZIONE IN

CORSO 10%

If the operation is successfully performed, LCD shows:

OPERATION DONE

Setup with PC

Power up the keypad. Press and hold . LCD shows:

TIME AND DATE

01-XXXXXX

Enter the manager code and press . LCD shows:

TIME AND DATE

SETTINGS

Press until LCD shows:

PC LINK

Press , LCD shows:

PC LINK

...

Start the programming on the Setup software or press to exit.

If the operation is successfully performed, LCD shows the firmware

version and few seconds later the keypad switches OFF. Pease refer to

the user manual IU_DigiTech_setup_XX for further information.

Test mode

This function allows to check the correct system operation.

Power up the keypad. Press and old . LCD shows:

TEST MODE

1234567890 ➔

Enter the sequence of buttons shown on the LCD.

TEST MODE

1234567890 ➔

Any working button produces a short beep.

A damaged button produces a long beep. LCD shows:

WRONG/FAULTY

KEY

Andere Handbücher für DigiTech

Inhaltsverzeichnis

Andere Tecnosicurezza Sperren Handbücher

Tecnosicurezza

Tecnosicurezza T6530/DL Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza KL3909 Montageanleitung

Tecnosicurezza

Tecnosicurezza MiniTech TSMINI-4 Handbuch

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse 2 Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Betriebsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Series Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza T9510/BR Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Benutzerhandbuch

Tecnosicurezza

Tecnosicurezza Pulse Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse T6430 Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung