Tecnosicurezza DigiTech Bedienungsanleitung

IU_DigiTech_easy_03_eng

Default codes

Manager

0 1 - 1 2 3 4 5 6 +

Optional Dallas key

User 2

0 2 - 0 2 0 2 0 2 +

Optional Dallas key

User 3

0 3 - 0 3 0 3 0 3 +

Optional Dallas key

User x

x x –x x x x x x +

Optional Dallas key

Dallas key

In the event that the user is composed of "code + Dallas key", before or after entering the code, the Dallas key must be

placed on the appropriate Dallas key reader.

Override user

The override user 30 opens without waiting the time delay. In the default programming they are set in dual code opening

but, upon request, the single opening mode can also be set.

Silent alarm

It is activated by increasing or decreasing the last digit by one number when entering the opening code.

Penalty

After four attempts to enter an incorrect code, the lock starts a 4-minute delay period. Each attempt to enter the code

within the 4 minutes delay period restarts the count.

Low battery warning

A message on the display and a long beep during opening indicates a low battery level. Replace immediately the low battery

with a new Alkaline battery.

Sound signals

A double beep normally indicates a correct

operation. A long beep indicates an incorrect

operation and the end

of the operation itself.

Reccomendations

Do not use easily identifiable codes such as 123456, dates of birth or other personal information.

DigiTech

User instructions

Opening

(It is recommended to change the factory code before use and to safely store the new code)

Press any key to turn on the device. The display shows the message:

USER CODE

X X –X X X X X X

Enter the opening code. The display shows the time delay counting if programmed.

TIME DELAY

00:59

At the end of the time delay, the display shows the counting of the open window.

OPEN WINDOW

00:01

Enter the opening code. The display shows the message:

OPEN

Open the safe door within 4 seconds.

Dual code opening

(It is recommended to change the factory code before use and to safely store the new code)

Press any key to turn on the device. The display shows the message:

USER CODE

X X –X X X X X X

Enter the opening code. The display shows the time delay counting if programmed.

TIME DELAY

00:59

At the end of the time delay, the display shows the counting of the open window.

OPEN WINDOW

00:01

Enter the 1° opening code. The display shows the message:

2° USER CODE

X X –X X X X X X

Enter the 2° opening code. The display shows the message:

OPEN WINDOW

Open the safe door within 4 seconds.

Change code

(

Safely store the new code and perform various opening / closing tests before closing the safe door )

To be performed with the door open!

Press and hold . The display shows the message:

OLD CODE

X X - X X X X X X

Enter the old code. The display shows the message:

NEW CODE

X X X X X X

Enter the new code. The display shows the message:

CONFIRM CODE

X X X X X X

Confirm the new code.

OPERATION

DONE

Perform various opening / closing tests before closing the safe door.

IU_DigiTech_easy_03_eng

User instructions

DigiTech

Further information

For the complete manual and further information on the product's features, please visit www.tecnosicurezza.it

Users management

Press and hold . The display shows the message:

USERS MANAGEMENT

0 1 –X X X X X X

Enter the Manager code.

Press to scroll the list or enter the user ID.

02 03 04 05 06

x _ _ 

“” installed user, “X” disabled user, “_” deleted user.

The override user (30) can be installed only when the lock is open.

Press . If the user is not installed, the display shows the message:

INSTALL?

Press to confirm, or to disable/enable/delete and to confirm.

Membrane test

Press any key to turn on the device.

Press and hold the button . The display shows the message:

MEMBRANE TEST

1234567890 

Press in sequence the buttons shown in the display.

MEMBRANE TEST

1234567890 

A confirmation beep is given for each pushed key working properly.

A damaged key is indicated with a long beep. The display shows the message:

WRONG/FAULTY

KEY

Change time and date

Press and hold . The display shows the message:

TIME AND DATE

0 1 –X X X X X X

Enter the Manager code. The display shows the message:

TIME AMD DATE

SETTINGS

Press . The display shows the date and time currently set:

12:00 WED

13 /02/2019

To modify, press . The display shows the message:

hh:mm _ _ _

DD/MM/YYYY

Enter time and date and press to confirm.

Time delay

Press and hold . The display shows the message:

SET TIME DELAY

0 1 –X X X X X X

Enter the Manager code. The display shows the time delay currently set:

TIME DELAY 00

OPEN WINDOW 01

To modify, press . The display shows the message:

TIME DELAY mm

OPEN WINDOW mm

Enter the desired values and press to confirm.

VALUES UPDATED

GLOBAL HEADQUARTERS

USA HEADQUARTERS

SPAIN HEADQUARTERS

Tecnosicurezza SpA

Tecnosicurezza Inc.

Tecnosicurezza Sa

Via Cesare Battisti. 276

50, Thomas Lane

C/Menor, 4 - Nave 10

37057 San Giovanni Lupatoto

Verona

Versailles, KY 40383

Pol. Ind La Mina 28770

Colmenar Viejo

Tel.+39 045 826 64 70

Tel.+1 859 490 89 30

Tel.+34 91 804 33 91

Fax. +39 045 826 64 69

Fax.+34 91 804 32 63

info@tecnosicurezza.it

info@usatecno.com

info@tecnosicurezza.es

Andere Handbücher für DigiTech

Andere Tecnosicurezza Sperren Handbücher

Tecnosicurezza

Tecnosicurezza Pulse Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Benutzerhandbuch

Tecnosicurezza

Tecnosicurezza MiniTech TSMINI-4 Handbuch

Tecnosicurezza

Tecnosicurezza MiniTech Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza MiniTech Betriebsanleitung

Tecnosicurezza

Tecnosicurezza Pulse 2 Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse T6430 Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Series Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza T9510/BR Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza TechMaster T9530/GR Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza Pulse Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza T6530/DL Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza KL3909 Montageanleitung

Tecnosicurezza

Tecnosicurezza Pulse Pro Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Bedienungsanleitung

Tecnosicurezza

Tecnosicurezza DigiTech Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung