Teknik 5427134 Bedienungsanleitung

Iron Foundry Double Pedestal Desk

Model 5427134

For all your

newfanled gadgetry.

Teknik

www.teknikoffice.co.uk

Part Identiﬁcation

Hardware Identiﬁcation

Assembly Steps

No. 2 Phillips Screwdriver

Tip Shown Actual Size

Table of Contents Assembly Tools Required

5-16

Pae 2

Part Identiﬁcation

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede

to help distinuish similar parts from each other. Use this part identiﬁcation to help identify similar parts.

Now you know

our ABCs.

A TOP (1)

B MODESTY PANEL (1)

C LEFT END /UPRIGHT(2)

D RIGHT END/UPRIGHT (2)

E BACK (2)

F CABINET BOTTOM (2)

G DRAWER FRONT (2)

H LEFT DRAWER SIDE (2)

J RIGHT DRAWER SIDE (2)

K DRAWER BACK (2)

L DRAWER BOX FRONT (2)

N DRAWER BOTTOM (2)

O BOTTOM (2)

P SHORT BRACE (4)

Q END FRAME (2)

R UPRIGHT FRAME (2)

S LONG BRACE (1)

Pae 3

Hardware Identiﬁcation

åScrews are shown actual size. You may receive extra hardware with your unit.

1-9/16" PAN HEAD SCREW - 8

1-7/8" HEX HEAD SCREW - 4

7/8" PAN HEAD SCREW - 8

1-3/8" HEX HEAD SCREW - 34

13 14 114" MACHINE SCREW  4

1-3/16" FLAT HEAD SCREW - 16

CAM SCREW - 1

4WOOD DOWEL - 40

5 6 ADJUSTABLE

GLIDE - 8

(EXTENSION SET SHOWN SEPARATED)

HIDDEN CAM - 1

1EXTENSION RAIL - 4 2EXTENSION SLIDE - 4

L-WRENCH - 1

PULL - 2

7FILE GLIDE - 4

8APPLIQUE CARD - 1

Pae 4

3/8" FLAT HEAD SCREW - 24

Step 1

å Assemble your unit on a carpeted ﬂoor or on the empty carton to avoid scratchin your unit or the ﬂoor.

å Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diaram below. Be

prepared, the parts are reasy.

å Fasten the EXTENSION RAILS (1) to the ENDS/UPRIGHTS (C and D). Use six 3/8" FLAT HEAD SCREWS (16).

å NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlared diaram. Then, slide the inner

cartride of the EXTENSION RAIL in to ﬁnd the other holes that lines up with the holes in the END./UPRIGHTS. Turn a

SCREW into these holes.

å NOTE: The EXTENSION SLIDES (2) will be used later for the DRAWERS.

å Repeat this step.

Open end

There should be two

holes on this ede.

There should be two

holes on this ede.

Open end

Pull the black lever down and pull the SLIDE from the RAIL.

Pae 5

3/8" FLAT HEAD SCREW

(12 used in this step)

å Insert four WOOD DOWELS (5) into a BACK (E).

å Push a set of ENDS/UPRIGHTS (C and D) onto the

WOOD DOWELS (5) in the BACK (E).

å Insert four WOOD DOWELS (5) into the edes of the

END/UPRIGHTS (C and D).

å Turn the cabinet onto its back. Fasten a CABINET

BOTTOM (F) to the END/UPRIGHTS (C and D). Use four

1-9/16" PAN HEAD SCREWS (12).

å NOTE: Be sure the WOOD DOWELS in the ENDS/

UPRIGHTS insert into the BOTTOM (F).

å Repeat this step.

Step 2

1-9/16" PAN HEAD SCREW

(8 used in this step)

Pae 6

Some assembly

(and snacks) required.

(16 used)

Hardware Usae Guide

HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL

NOTE: Various CAM SCREWS or a CAM DOWEL may be used.

Cam Screws Cam Dowel

Turn the CAM SCREW or

ently tap the CAM DOWEL

until the shoulder is aainst

the surface of the part.

Hidden CamHidden Cam

Arrow

Push a HIDDEN CAM into

the part. The arrow in the

HIDDEN CAM must point

toward the hole in the

ede of the board.

Hole

Insert the CAM SCREW or CAM DOWEL into the

HIDDEN CAM. Tihten the HIDDEN CAM.

Pae 7

Step 3

å Push a HIDDEN CAM (3) into the MODESTY PANEL (B).

å Fasten the UPRIGHT FRAMES (R) to the MODESTY

PANEL (B). Tihten four 1-7/8" HEX HEAD SCREWS (11)

usin the L-WRENCH (9).

å Fasten the LONG BRACE (S) to the UPRIGHT

FRAMES (R). Tihten two 1-3/8" HEX HEAD

SCREWS (13) usin the L-WRENCH (9). 3

Arrow

1-7/8" HEX HEAD SCREW

(4 used in this step)

Surface with HIDDEN CAM

1-3/8" HEX HEAD SCREW

(2 used in this step)

Pae 8

Do not tihten the HIDDEN CAM in this step.

Step 4

å Fasten the SHORT BRACES (P) to the UPRIGHT

FRAMES (R). Tihten four 1-3/8" HEX HEAD

SCREWS (13) usin the L-WRENCH (9).

å Fasten the END FRAMES (Q) to the SHORT BRACES (P).

Tihten four 1-3/8" HEX HEAD SCREWS (13) usin

the L-WRENCH (9).

å NOTE: Do not completely tihten the 1-3/8" HEX HEAD

SCREWS at this time.

1-3/8" HEX HEAD SCREW

(8 used in this step)

Pae 9

å Fasten the BOTTOMS (O) to the UPRIGHT

FRAMES (R) and END FRAMES (Q). Turn four 1-3/8"

HEX HEAD SCREWS (13) usin the L-WRENCH (9).

å NOTE: Do not completely tihten the 1-3/8" HEX HEAD

SCREWS at this time.

å Turn eiht ADJUSTABLE GLIDES (6) completely into the

UPRIGHT FRAMES (R) and the END FRAMES (Q).

å NOTE: The ADJUSTABLE GLIDES are used to level

your desk and will be adjusted after the unit is

standin upriht in the last step.

Step 5

1-3/8" HEX HEAD SCREW

(8 used in this step)

Pae 10

Side Step: Make

nachos. (Optional, but

recommended.)

Inhaltsverzeichnis

Andere Teknik Inneneinrichtung Handbücher

Teknik

Teknik City Centre 5427120 Bedienungsanleitung

Teknik

Teknik Elstree 5426908 Bedienungsanleitung

Teknik

Teknik 5431262 Bedienungsanleitung

Teknik

Teknik 5427129 Bedienungsanleitung

Teknik

Teknik 5427872 Bedienungsanleitung

Teknik

Teknik Mahattan View 5423446 Bedienungsanleitung

Teknik

Teknik Barrister Home L-Shaped Desk 5418270 Bedienungsanleitung

Teknik

Teknik 5420277 Bedienungsanleitung

Teknik

Teknik Craft 5421416 Bedienungsanleitung

Teknik

Teknik 5412320 Bedienungsanleitung

Teknik

Teknik Boulevard Cafe 5420667 Bedienungsanleitung

Teknik

Teknik 5426436 Bedienungsanleitung

Teknik

Teknik Avon 5422051 Bedienungsanleitung

Teknik

Teknik 5427427 Bedienungsanleitung

Teknik

Teknik Clifton Place 5421116 Bedienungsanleitung

Teknik

Teknik 5426510 Bedienungsanleitung

Teknik

Teknik Canal Heights 5419231 Bedienungsanleitung

Teknik

Teknik 5401562 Bedienungsanleitung

Teknik

Teknik 5427127 Bedienungsanleitung

Teknik

Teknik 5423023 Bedienungsanleitung

Teknik

Teknik New Hyde 426440 Bedienungsanleitung

Teknik

Teknik 5414142 Bedienungsanleitung

Teknik

Teknik Canal Heights End 5419229 Bedienungsanleitung

Teknik

Teknik Barrister Home 5418902 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung