Teknik 5412320 Bedienungsanleitung

NOTE: THIS INSTRUCTION

BOOKLET CONTAINS IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR

FUTURE REFERENCE.

Home Study L Shaped Desk

Model 5412320

www.teknikoffice.co.uk

Sit and surf.

Teknik

Table of Contents Assembly Tools Required

5-32

Part Identiﬁcation

Hardware Identiﬁcation

Assembly Steps

Safety

Hammer

Not actual size

No. 2 Phillips Screwdriver

Tip Shown Actual Size

Skip the power trip.

This time.

Page 2

Part Identiﬁcation Now you know

our ABCs.

Page 3

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge

to help distinguish similar parts from each other. Use this part identiﬁcation to help identify similar parts.

A RIGHT END (1)

B LEFT END (1)

C LEFT UPRIGHT (1)

D RIGHT TOP (1)

D14 RIGHT DRAWER SIDE (1)

D15 LEFT DRAWER SIDE (1)

D78 DRAWER BACK (1)

D716 DRAWER BOTTOM (1)

E LEFT TOP (1)

F BOTTOM (1)

G RIGHT MODESTY PANEL (1)

H LEFT MODESTY PANEL (1)

I PURSE SHELF (1)

J SHELF (1)

K BACK (1)

L LEFT LEG (1)

M RIGHT FRONT/LEFT REAR LEG (3)

N LEFT CORNER LEG (1)

O RIGHT CORNER LEG (1)

P RIGHT REAR LEG (1)

Q BACK LEG (1)

R DRAWER FRONT (1)

W PURSE SHELF MOLDING (1)

X LEFT FRONT MOLDING (1)

Y RIGHT FRONT MOLDINIG (1)

Z FRONT MOLDING (1)

AA TOP LEFT SIDE MOLDING (1)

BB TOP RIGHT SIDE MOLDING (1)

CC BOTTOM MOLDING (1)

DD LEFT END MOLDING (1)

EE LOWER LEFT MOLDING (1)

FF UPPER LEFT MOLDING (1)

GG LOWER RIGHT MOLDING (1)

HH UPPER RIGHT MOLDING (1)

II RIGHT END MOLDING (1)

D14

D716

D78

D15

Hardware Identiﬁcation

åScrews are shown actual size. You may receive extra hardware with your unit.

Page 4

KK EXTENSION SLIDE - 2

JJ EXTENSION RAIL - 2

(EXTENSION SET SHOWN SEPARATED)

RR GROMMET - 2 GROMMET CAP - 2

TWIST-LOCK®

FASTENER - 18

ANGLE BRACKET - 12

SUPPORT PIN - 2

SLIDE CAM - 2

PULL - 1

CORD CLIP - 2

WASHER - 1

TIE PLATE - 2

AAA SCREW COVER - 10CAM COVER - 10

BBB BLACK 2-1/4" FLAT HEAD SCREW - 2 CCC BLACK 1-7/8" FLAT HEAD SCREW - 9

DDD BLACK 9/16" LARGE HEAD SCREW - 32 EEE BLACK 9/16" FLAT HEAD SCREW - 12

FFF GOLD 5/16" FLAT HEAD SCREW - 8

HHH NAIL - 22

GGG SILVER 1/4" MACHINE SCREW - 1

FILE GLIDE - 2

30S BLACK 1-9/16" FLAT HEAD SCREW - 4

HIDDEN CAM - 18

NN CAM SCREW - 18

Step 1

å Assemble your unit on a carpeted ﬂoor or on the empty

carton to avoid scratching your unit or the ﬂoor.

å To begin assembly, push a TWIST-LOCK®

FASTENER (MM) into the large holes in the BOTTOM (F)

and RIGHT MODESTY PANEL (G). Repeat this step for the

LEFT MODESTY PANEL (H), PURSE SHELF (I), SHELF (J),

and CORNER LEGS (N and O).

Page 5

(18 used)

Do not tighten the TWIST-LOCK® FASTENERS in this step.

Step 2

å Push eighteen HIDDEN CAMS (NN) into the ENDS (A and B),

LEFT UPRIGHT (C), and LEGS (L, M, P, and Q).

Page 6

(18 used)

Arrow

Arrow Do not tighten the HIDDEN CAMS in this step.

Arrow

The arrow in the HIDDEN

CAM must point toward the

hole in the edge of the board.

Hole

å Turn eighteen CAM SCREWS (OO) into the TOPS (D and E)

and LEGS (L, M, P, and Q).

Step 3

Page 7

(18 used)

Step 4

å Fasten the LEGS (L, M, and Q) to the ENDS (A and B) and

LEFT UPRIGHT (C). Tighten eight HIDDEN CAMS.

Page 8

Curved edge

Finished edge

Curved edge

Finished edge

Surface with

HIDDEN CAMS

Surface with

HIDDEN CAMS

Surface with

HIDDEN CAMS

These surfaces should be even.

å Carefully turn the ENDS (A and B) over.

å Turn twelve BLACK 9/16" FLAT HEAD SCREWS (EEE) into the

ENDS (A and B) until the shoulders of the SCREWS rest on the

surfaces of the ENDS.

å First, slide the LOWER MOLDINGS (EE and GG) onto the ENDS (A and B).

Line up the grooves in the MOLDINGS over the heads of the SCREWS in

the ENDS.

å Second, slide the END MOLDINGS (DD and II) onto the ENDS (A and B)

until they are against the LOWER MOLDINGS. Line up the grooves in the

MOLDINGS over the heads of the SCREWS in the ENDS.

Step 5

Page 9

2nd

1st

2nd

BLACK 9/16" FLAT HEAD SCREW

(12 used in this step)

EEE

These edges should be even.

Shoulder

Apply pressure with your hands as you guide the

MOLDINGS over the SCREWS and onto the ENDS.

Shoulder

Remember:

Righty tighty.

Lefty loosey.

Step 6

å Slide the UPPER MOLDINGS (FF and HH) onto the

ENDS (A and B). Line up the grooves in the MOLDINGS

over the heads of the SCREWS in the ENDS.

Page 10

These edges should be even.

Shoulder

Apply pressure with your hands as you guide the

MOLDINGS over the SCREWS and onto the ENDS.

Inhaltsverzeichnis

Andere Teknik Inneneinrichtung Handbücher

Teknik

Teknik Boulevard Cafe Series Bedienungsanleitung

Teknik

Teknik 5402174 Bedienungsanleitung

Teknik

Teknik Elstree Executive Desk 5426918 Bedienungsanleitung

Teknik

Teknik 5420275 Bedienungsanleitung

Teknik

Teknik Hudson Elm finish 5427457 Bedienungsanleitung

Teknik

Teknik 5422379 Bedienungsanleitung

Teknik

Teknik Barrister Home 3 Drawer Chest 5418702 Bedienungsanleitung

Teknik

Teknik Boutique Style Desk Bedienungsanleitung

Teknik

Teknik Boulevard Cafe 5421950 Bedienungsanleitung

Teknik

Teknik Hudson 5425829 Bedienungsanleitung

Teknik

Teknik 5426133 Bedienungsanleitung

Teknik

Teknik Boulevard Cafe 5420667 Bedienungsanleitung

Teknik

Teknik Craft 5427456 Bedienungsanleitung

Teknik

Teknik Hudson 5425815 Bedienungsanleitung

Teknik

Teknik City Centre 5427120 Bedienungsanleitung

Teknik

Teknik 5418269 Bedienungsanleitung

Teknik

Teknik Canyon Lane 5425306 Bedienungsanleitung

Teknik

Teknik Hudson 5425825 Bedienungsanleitung

Teknik

Teknik 5418072 Bedienungsanleitung

Teknik

Teknik Avon 5422051 Bedienungsanleitung

Teknik

Teknik 5427873 Bedienungsanleitung

Teknik

Teknik Hampstead Park Narrow Bookcase 5420283 Bedienungsanleitung

Teknik

Teknik Hythe 5426437 Bedienungsanleitung

Teknik

Teknik Contemporary Bureau 5416966 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung