TEKTELIC Communications TUNDRA Bedienungsanleitung

TEKTELIC TUNDRA Sensor:

Quick Start Guide

BEFORE YOU START

Ensure the device is comissisioned on your network server before activation

For assistance please visit http://www.support.tektelic.com

Activating the Device

The device is shipped with the batteries installed and in a state of DEEP-SLEEP until activated with a magnet.

There is no need to open the enclosure to activate the device.

To activate the device, move the provided magnet close to the magnet symbol at the bottom of the enclosure

using a specific switch pattern:

Magnetic Pattern to Activate or Reset Device

Step 1: Bring Magnet within 2cm of Magnet Symbol on

device (see picture) for more than 3 seconds but less than 10

seconds.

Step 2: Remove Magnet away from Device. LED will blink

until device has joined Network Server.

Note:

•This magnetic pattern always triggers a module reset, even during normal operation.

•LED will blink for every message sent to Network Server.

Magnet Symbol

LED

Activation Troubleshooting

If the device remains blinking green for more than two minutes follow these

troubleshooting actions:

•Ensure the device is provisioned on the Network Server

•Ensure the local LoRa Gateway has also been provisioned on the Network Server

•Ensure a local LoRa Gateway is online

Note:

If you have questions about using this device please visit the TEKTELIC Support Portal

support.tektelic.com for access to our knowledge base.

FCC Certification information can be found on the Long Form User Guide available on

the TEKTELIC Support Portal at support.tektelic.com

www.tektelic.com

The default data reporting periods are listed in Table 1. To make changes to the

default data reporting periods, please refer to the knowledge base on the

support portal at support.tektelic.com

Configuration & Customization

Table 1: Default Reporting Periods of the TUNDRA Sensor

Application Solution: LeapX

This device is by supported by the TEKTELIC LeapX Application

To use LeapX, you will need a TEKTELIC Account. If you don’t have an account already, please

raise a ticket in our support portal support.tektelic.com and our support team will create an

account for you.

To install LeapX Application on your Smart Device, please search for “TEKTELIC LeapX” on the

Google Play Store or the Apple App Store. Once the app is installed, log in to the app using the

username and password of your TEKTELIC account. Then follow the in-app instructions.

online

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TEKTELIC Communications Zubehör Handbücher

TEKTELIC Communications

TEKTELIC Communications T0004437 Bedienungsanleitung

TEKTELIC Communications

TEKTELIC Communications Kona All-in-One Home Sensor Series Bedienungsanleitung

TEKTELIC Communications

TEKTELIC Communications TUNDRA Bedienungsanleitung

TEKTELIC Communications

TEKTELIC Communications Kiwi Bedienungsanleitung

TEKTELIC Communications

TEKTELIC Communications T0004893 Produkthandbuch

TEKTELIC Communications

TEKTELIC Communications Kona All-in-One Home Sensor Bedienungsanleitung

TEKTELIC Communications

TEKTELIC Communications Kona Produkthandbuch

TEKTELIC Communications

TEKTELIC Communications T0006623 Bedienungsanleitung

TEKTELIC Communications

TEKTELIC Communications T0005982 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung