Teldat RXL14000 Bedienungsanleitung

RXL14000

Installation Manual

Teldat S.A. Manual

RXL14000 1

Legal Notice

Warranty

This publication is subject to change.

Teldat S.A. offers no warranty whatsoever for information contained in this manual.

Teldat S.A. is not liable for any direct, indirect, collateral, consequential or any other damage connected to the deliv-

ery, supply or use of this manual.

Manual Teldat S.A.

2RXL14000

Table of Contents

I RelatedDocuments................................. 1

Chapter1 AboutthisGuide.................................. 2

1.1 Supporteddevices................................... 2

1.2 Who should read this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 When should this manual be read? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.4 Whatisinthismanual?................................. 2

1.5 Whatisnotinthismanual? ............................... 2

1.6 How is the information organized? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.7 Technicalsupport.................................... 2

Chapter2 RXL14000 ..................................... 3

2.1 Characteristics..................................... 3

2.1.1 Powersupply ..................................... 3

2.1.2 Hardwaremonitoring.................................. 3

Chapter 3 Components and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.1 Components...................................... 4

3.1.1 Frontpanel ...................................... 4

3.1.2 Rearpanel....................................... 6

3.2 Installationinarack................................... 6

3.2.1 Standalone ...................................... 6

3.2.2 Wallmounting..................................... 6

3.3 Plug-inmodules.................................... 6

3.3.1 Installation....................................... 6

3.3.2 Uninstall........................................ 6

3.4 Powersource ..................................... 7

3.4.1 Internalpowersource.................................. 7

3.5 RSTbutton ...................................... 8

3.5.1 Rebootingthedevice.................................. 8

3.5.2 Defaultconfiguration.................................. 8

3.6 Connectingthedata................................... 8

3.6.1 8-portEthernetswitch.................................. 8

3.6.2 WANconnection.................................... 9

3.6.3 Connecting a USB device (USB connector) . . . . . . . . . . . . . . . . . . . . . . . . 9

3.6.4 Connecting for configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Teldat S.A. Table of Contents

RXL14000 i

Chapter4 Compliance.................................... 10

4.1 Manufacturerinformation ............................... 10

4.2 Safetywarnings ................................... 11

4.3 WEEEinformation.................................. 12

4.4 REACH....................................... 12

4.5 EC declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.6 Laserproduct .................................... 13

Appendix A Technical Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

A.1 Troubleshooting................................... 14

A.2 Updatingthesoftware................................. 14

A.3 Connectingtothedevice ............................... 14

A.3.1 Connecting using the local console (Aux connector) . . . . . . . . . . . . . . . . . . . . 14

A.4 Connectors ..................................... 15

A.4.1 LANconnector.................................... 15

A.4.2 WANBase-tconnector................................ 16

A.4.3 WANSFPconnector................................. 16

A.4.4 USBconnector.................................... 16

A.4.5 Configurationconnector................................ 17

A.5 Technicalspecifications................................ 17

A.5.1 Hardwarearchitecture................................. 17

A.5.2 LANinterface .................................... 17

A.5.3 WANBase-Tinterface................................. 17

A.5.4 WANSFPinterface.................................. 18

A.5.5 USBinterface.................................... 18

A.5.6 Configurationinterface ................................ 18

A.5.7 Powersupply .................................... 18

A.5.8 Dimensionsandweight................................ 18

A.5.9 Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Table of Contents Teldat S.A.

ii RXL14000

I Related Documents

Teldat Dm748-I Software Updating

Teldat S.A. Related Documents

RXL14000 1

Chapter 1 About this Guide

This installation guide for the RXL14000 router contains information on how to correctly install this device in a work-

ing environment.

1.1 Supported devices

The information provided in this installation guide only applies to the RXL14000 router.

1.2 Who should read this manual?

This manual should be read by the support personnel who need to configure, maintain and monitor the device.

1.3 When should this manual be read?

Read this guide as soon as you are ready to familiarize yourself with the device and its components.

This manual will help you understand your new device in greater depth.

1.4 What is in this manual?

This installation guide contains the following information:

• A description of the features available in the RXL14000 router.

• Technical specifications.

• Power supply requirements.

• Elements that can be connected when the router is operating.

• How to install and uninstall the modules and power sources.

• A description of the device LEDs and connectors.

• Troubleshooting.

1.5 What is not in this manual?

This manual does not contain information relative to the device software or its configuration. For information on how

to configure this device, please see the relevant protocol manuals found in the Teldat website: http://www.teldat.com

1.6 How is the information organized?

Each chapter focuses on a specific part of the hardware and its components. All descriptive or technical specifica-

tions, and information on a component, can be found in the relevant chapter.

1.7 Technical support

Teldat S.A. offers a technical support service. Device software can be upgraded on a regular basis for maintenance

purposes and when new features are developed.

Contact information:

Web: http://www.teldat.com - Email: [email protected]

Tel.: +34 918 076 565 - Fax: +34 918 076 566

1 About this Guide Teldat S.A.

2RXL14000

Chapter 2 RXL14000

2.1 Characteristics

2.1.1 Power supply

For further information on the different RXL14000 power supplies, please see Components and Power Supply on

page 4, section Power source on page 7.

2.1.2 Hardware monitoring

The LEDs on the front panel are used to monitor the hardware in the RXL14000 router. These LEDs provide visual

information on the state of the device and reference the condition of the hardware components, indicating whether

there is connectivity, data flow, etc.

For further information on the LED panel, please see Components on page 4.

Teldat S.A. 2 RXL14000

RXL14000 3

Chapter 3 Components and Power Supply

The following chapter provides detailed information on the chassis of the RXL14000 router and its components. This

includes information on:

• Components.

• Assembly.

• Power supply.

• RST button.

• Data connection.

3.1 Components

3.1.1 Front panel

The following figure shows the front panel. Here you will find most of the RXL14000 router connectors.

Fig. 1: Front Panel

The front panel components are as follows:

Front panel components

Item Description

A LED panel.

B SD Slot card.

C Aux. Provides access to the RXL14000 local console for configuring and monitor-

ing purposes.

D USB. Slot where you can insert an external USB device.

E 8-port Gigabit Ethernet switch.

F PoE. Connector for power supply through Ethernet (Power over Ethernet). Not

available.

G Eth WAN Base-T. WAN Gigabit Ethernet.

H Eth WAN SFP.

I T. Reserved for future use.

J RST. Reset button. For further information on how the reset button works, please

see RST button on page 8.

K On/Off switch.

The LED panel provides information on the status of the components (whether they are active or not) and on the net-

work activity.

LEDs

3 Components and Power Supply Teldat S.A.

4RXL14000

LED Definition Status Indication

PSU Power / Switch On-Off Off -> no power through PSU.

On -> powered through PSU.

S General Status /

Default Configuration Process

Off -> system off.

Red -> error, component operating incorrectly.

Green -> system initialized and operating.

Amber (blinking) -> default configuration.

USB USB Interface Status Off -> system stopped.

Red -> interface is unavailable because it is installing or disabled

(shutdown) or due to auto-test failure.

Amber -> idle.

• Rapid blinking. It has not registered in the network or the quality

is insufficient.

• Slow blinking. GSM connection (GPRS).

• Steady. WCDMA (UMTS / HSDPA) connection.

Blinking (green/red) -> activity/maintenance.

LAN Switch LAN Switch interface activity Green -> connected. Blinking: connection data activity.

Red -> disconnected.

Off -> interface off.

Eth WAN Base-T Green -> connected. Blinking: connection data activity.

Off -> not used.

SFP Green -> connected. Blinking: connection data activity.

Off -> not used.

In addition to the LEDs described in the above table, the front panel also has LEDs linked to the Switch Ethernet in-

terfaces.

Fig. 2: Ethernet interface LEDs

The following table provides information on the LEDs associated with the Switch Ethernet interface:

Switch Ethernet interface LED indicators

LED Description State

Orange PoE activity Always OFF.

Green Ethernet (link) connection established Off -> link has not been detected.

Teldat S.A. 3 Components and Power Supply

RXL14000 5

Green -> link detected. Blinking: con-

nection data activity.

3.1.2 Rear panel

The following figure shows the rear panel.

Fig. 3: Rear panel

The following table provides information and a description of each component:

Rear panel components

Item Description

A Ventilation slots.

B Power cable connection.

3.2 Installation in a rack

The RXL14000 can be installed in a 19” rack.

3.2.1 Standalone

RXL14000 devices can be placed as standalones on a flat, stable surface. The adhesive rubber feet must be stuck

to the underside panel to prevent the router from sliding.

Make sure there is enough space around the router (for ventilation purposes) and check that the electricity cables

can reach it.

3.2.2 Wall mounting

The RXL14000 cannot be mounted on the wall.

3.3 Plug-in modules

The only module that can be inserted in the device is a USB.

3.3.1 Installation

Simply insert the USB in the appropriate slot on the rear panel, as shown in the following figure:

Fig. 4: USB modem insertion slot

3.3.2 Uninstall

To remove the device, simply remove it from the slot where it was inserted.

3 Components and Power Supply Teldat S.A.

6RXL14000

Inhaltsverzeichnis

Andere Teldat Netzwerk-Router Handbücher

Teldat

Teldat REGESTA-PRO-ER Series Bedienungsanleitung

Teldat

Teldat Connect-104 Bedienungsanleitung

Teldat

Teldat IMBER SMART Bedienungsanleitung

Teldat

Teldat RS300 Series Bedienungsanleitung

Teldat

Teldat ATLAS 60 NW Bedienungsanleitung

Teldat

Teldat Atlas 250 Bedienungsanleitung

Teldat

Teldat Connect-FW Bedienungsanleitung

Teldat

Teldat H1 RAIL Series Bedienungsanleitung

Teldat

Teldat H2 RAIL Bedienungsanleitung

Teldat

Teldat bintec elmeg Regesta PRO PLC Bedienungsanleitung

Teldat

Teldat WWAN Enabler Bedienungsanleitung

Teldat

Teldat C1+LS Bedienungsanleitung

Teldat

Teldat M2 Bedienungsanleitung

Teldat

Teldat RXL15000 Bedienungsanleitung

Teldat

Teldat Connect-4GePlus Bedienungsanleitung

Teldat

Teldat Teldat-3Ge-USB Bedienungsanleitung

Teldat

Teldat iM8-Cx Bedienungsanleitung

Teldat

Teldat H1 HSDPA Bedienungsanleitung

Teldat

Teldat M8-Smart Bedienungsanleitung

Teldat

Teldat ATLAS 160 Bedienungsanleitung

Teldat

Teldat Connect 104KF TLDPM00A1 Bedienungsanleitung

Teldat

Teldat C Bedienungsanleitung

Teldat

Teldat T200 Bedienungsanleitung

Teldat

Teldat Teldat-3Ge Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise