Teledyne Lecroy HDO9000 Bedienungsanleitung

HDO9000

Oscilloscopes

Getting Started Guide

930536-00 Rev A

HDO9000 Oscilloscopes

Getting Started Guide

Unauthorized duplication of Teledyne LeCroy documentation materials is strictly prohibited. Customers are permitted to

duplicate and distribute Teledyne LeCroy documentation for internal educational purposes.

Teledyne LeCroy is a trademark of Teledyne LeCroy, Inc. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications are

subject to change without notice.

930536-00 Rev A,

January, 2019

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

HDO9000 Getting Started Guide 1

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features unique to our instruments. This guide is

intended to help you set up an HDO9000 oscilloscope and learn some basic operating procedures, so you're quickly working with waveforms.

• See the MAUI Oscilloscopes Remote Control and Automation Manual for comprehensive information on remote control of HDO9000.

• See the HDO9000 Oscilloscopes Operator’s Manual for detailed information on the operational features of the HDO9000.

Both manuals can be downloaded from the Oscilloscope Manuals page on our website at: teledynelecroy.com/support/techlib

Introduction

Introducing HDO9000 Oscillosocopes 2

Safety 2

Overview

Front of Oscilloscope 4

Powering On/Off 5

Side of Oscilloscope 6

Connecting to External Devices/Systems 7

Back of Oscilloscope 8

Front Panel 9

Touch Screen Display 10

Basics

Changing the Display 12

Working with Traces 14

MAUI with OneTouch 15

Vertical (Channel) 20

Digital 22

Horizontal (Timebase) 24

Zoom 27

Triggers 28

Cursors 30

Measurements & Statistics 31

Math 32

Memories (Reference Waveforms) 33

Decode 34

WaveScan 35

Spectrum Analyzer 36

History Mode 37

Saving and Sharing Data 38

Maintenance

Software Options 39

Cleaning 40

Language Selection 40

Calibration 40

Firmware Updates 41

Switching Windows Users 41

Service 42

Support 43

Reference

Windows License Agreement 43

Warranty 43

Certifications 44

930536-00 Rev A

Key Specifications

Detailed specifications are on the product datasheet at teledynelecroy.com.

INTRODUCTION

Bandwidth 1 GHz to 4 GHz

Analog Channels 4

Memory per Channel 64 Mpts/ch 4-channel operation

128 Mpts/ch 2-channel operation

Sample Rate 10 GS/s 4-channel operation

20 GS/s 2-channel operation

Vertical Resolution 10-bit

Digital Channels (optional) 16

Digital Sample Rate 1.25 GS/s

Min. Detectable Pulse Width 2 ns

Max. Input Frequency 250 MHz

Safety

Observe generally accepted safety practices in addition to the precautions

specified here.

Introducing HDO9000

HDO9000 high definition oscilloscopes leverage HD1024 technology to

deliver 10 bits of resolution on up to 4 GHz of bandwidth. The large, bright,

15.4” capacitive touch screen combined with the MAUI with OneTouch

user interface results in an unsurpassed user experience. Equipped with

a 40 GS/s sample rate and an extensive toolbox, the HDO9000 ensures

uncompromised performance when debugging in high definition.

HD1024

HD1024 high definition technology enables dynamic reconfiguration

of the ADC to achieve 10 bits of vertical resolution. By automatically

determining the best ADC configuration for each measuring condition,

the HDO9000 always provides the optimal resolution. HD1024 plus a low

noise system architecture delivers superior signal fidelity up to 4 GHz,

resulting in ENOB in excess of 7 bits.

MAUI with OneTouch

MAUI with OneTouch introduces a new paradigm for oscilloscope user

experience. Dramatically reduce set up time with revolutionary drag-and-

drop actions, and use familiar touch screen gestures like pinch, swipe and

flick to intuitively interact with the instrument.

Mixed Signal Option

The 16 integrated digital channels and tools designed to view, measure

and analyze both analog and digital signals enable fast debugging of

mixed signal designs.

Comprehensive Analysis Tools

HDO9000 has the most comprehensive trigger, decode, math, measure

and application toolsets available in its class. Apply statistical and

frequency analysis tools to enhance understanding of complex behaviors.

WaveScan® lets you to search acquisitions using more than 20 criteria,

while LabNotebook concisely documents and stores your results.

CAUTION of potential damage

to equipment, or WARNING of

potential bodily injury. Refer to

manual. Do not proceed until the

information is fully understood

and conditions are met.

WARNING. Risk of electric shock

or burn.

Frame or chassis terminal

Alternating current

Power On/Standby

Symbols

HDO9000 Getting Started Guide 3

Operating Environment Precautions

Use proper power cord. Use only the power cord shipped with this

instrument and certified for the country of use.

Maintain ground.

The AC inlet ground is connected to the frame of the

instrument. Connect line cords only to outlets with safety ground contacts.

WARNING. Interrupting the protective conductor inside or outside

the oscilloscope, or disconnecting the safety ground terminal,

creates a hazardous situation. Intentional interruption is prohibited.

Connect and disconnect properly. Do not connect/disconnect probes or

test leads while they are connected to a live voltage source.

Observe all terminal ratings. Do not apply a voltage to any input that

exceeds the maximum rating of that input. Refer to the markings next to

the BNC terminals for maximum allowed values.

Use only within operational environment listed. Do not use in wet or

explosive environments.

Use indoors only.

Keep product surfaces clean and dry.

Do not block the cooling vents. Leave a minimum six-inch (15 cm) gap

between the instrument and the nearest object. Keep the underside clear

of papers and other objects.

Exercise care when lifting and carrying. Unplug and use the built-in

carrying handle to move the instrument.

Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

Do not operate with suspected failures. Check body and cables regularly.

If any part is damaged, cease operation immediately and sequester the

instrument from inadvertent use.

SAFETY

Temperature 5 °C to 40 °C

Humidity Maximum RH 90% (non-condensing) up to 31 °C

decreasing linearly to RH 50% at 40 °C

Altitude Up to 10,000 ft (3,048 m) at or below 30 °C

Power

* All PC peripherals and active probes connected to four channels.

Measuring Terminal Ratings

Ratings apply to inputs C1-C4 and Ext In.

Measuring terminals have no rated measurement category (CAT) per IEC/EN 61010-1:2010.

Measuring terminals are not intended to be connected directly to supply mains.

Maximum Input Voltage 50 Ω coupling ≤ 5 Vrms

1 MΩ coupling ≤ 400 Vpk max. (Peak AC ≤ 10 kHz + DC)

derating at 14 dB/decade from 10 kHz to 2 MHz,

10 Vpk max. above 2 MHz

AC Power 100-240 VAC (±10%) at 50/60 Hz (±10%) or

100-120 VAC (±10%) at 400 Hz (±5%)

Automatic AC Voltage Selection

Consumption

Nominal 415 W / 415 VA

Maximum* 500 W / 500 VA

Standby 15 W

930536-00 Rev A

Front of Oscilloscope

OVERVIEW

A. Capacitive Touch Screen Display

B. Front Panel

C. Power On/Standby Button

D. Input Channels 1-4

E. EXT In

F. AUX Out

G. USB 2.0 Port

H. Mixed Signal Interface

I. LBUS Port

J. Cal Out and Ground Terminals

K. Tilting Feet

HDO9000 Getting Started Guide 5

To achieve optimal signal integrity, connect the ground at the tip of the flying

lead for each channel used in measurements. Use either the provided ground

extenders or flying ground leads to

make the ground connection.

To connect the leadset to the

oscilloscope, push the connector

into the mixed signal interface until

you hear a click.

To remove the leadset, press in and

hold the buttons on each side of the

connector, then pull out to release it.

Powering On/Off

Plug the line cord only into a grounded AC power outlet. See Power in

“Safety” for ratings. Press the Power button to turn on the oscilloscope. The

button will light to show the oscilloscope is operational.

CAUTION. Do not power on or calibrate with a signal attached.

Press the Power button again or use or the File > Shutdown menu option

to execute a proper shut down process and preserve settings.

CAUTION. Do not press and hold the Power button. This will

execute a hard shutdown, but may not preserve setups and data.

The Power button does not disconnect the oscilloscope from the AC

power supply, but puts it into "Standby" mode. Some “housekeeping”

circuitry continues to draw power. The only way to fully power down the

instrument is unplug the AC line cord from the outlet. We recommend

unplugging the instrument if it will remain unused for a long period of time

CAUTION. Do not change the Windows® Power setting to System

Standby or System Hibernate. Doing so may cause failure.

OVERVIEW

The touch screen display is the principal viewing and control center of

the oscilloscope. See p.10 for an overview of its components.

The front panel houses hard controls for different acquisition settings.

Operate the instrument using front panel controls, touch screen controls,

or a mix that is convenient for you. See "Front Panel" on p.9.

Channels 1–4 are used to input analog signal. EXT can be used to input

an external trigger signal.

AUX out can be configured to send a pulse to another device upon a

trigger event or Pass/Fail outcome.

The LBUS port may be used with the optional 8-Channel Sync to provide

precise synchonization with other instruments, or the HDA125-xx-LBUS

for high-speed digital analysis and triggering.

Cal out emits a signal that can be used to compensate passive probes.

HDO9000 oscilloscopes are compatible with the included passive probes

and all ProBus active probes that are rated for the oscilloscope’s bandwidth.

Probe specifications and documentation are at teledynelecroy.com/probes.

Supplied with the Mixed Signal

models, the digital leadset connects

to the Mixed Signal interface to

input up-to-16 lines of digital data.

Two digital banks with separate

threshold and hysteresis controls

make it possible to simultaneously

view data from different logic

families. Each flying lead has a

signal and a ground connection. A

variety of ground extenders and

flying ground leads are available for

your probing needs.

930536-00 Rev A

Side of Oscilloscope

HDMI 1.4 and DisplayPort 2.0 Ports

USB 3.1 Gen 1 Ports (4)

Ethernet Ports (2)

Audio Mic and Speaker

USBTMC Port (1) for remote control

B C

OVERVIEW

HDO9000 Getting Started Guide 7

Connecting to External Devices/Systems

See the HDO9000 Oscilloscopes Operator’s Manual for more instructions on

connecting to external devices.

Audio/USB Peripherals

Connect the device to the appropriate port. These connections are “plug-

and-play” and do not require further configuration. Use the Windows

control panel to make adjustments. Choose File > Minimize to go to the

Windows desktop.

External Monitor

The HDMI and DisplayPort interfaces support Ultra HD monitors. Connect

the monitor to a video output on the side of the instrument. You can

use an adapter if it does not have an HDMI or DP cable. Go to Display >

Display Setup > Open Monitor Control Panel to configure display settings

using the Windows control panel. Be sure to select the oscilloscope as the

primary display.

To use the Extend Grids feature, configure the second monitor to extend,

not duplicate, the oscilloscope display. If the external monitor is touch

screen enabled, the MAUI user interface can be controlled through touch

on the external monitor.

Note: The oscilloscope touch screen uses Fujitsu drivers. Because of

potential conflicts, external monitors with Fujitsu drivers cannot be used

as touch screens, only as displays.

LAN

The HDO9000 is preset to accept a DHCP network address over a TCP/IP

connection. Connect an ENET cable from either port to a network access

device. Go to Utilities > Utilities Setup > Remote to find the IP address.

To assign the oscilloscope a static IP address, open Net Connections

from the Remote dialog and use the Windows networking dialogs to

configure the device address. Go to File > File Sharing to configure email.

Remote Control

You can control the instrument over a LAN using VICP (TCP/IP) or

VXI-11 (LXI). Use a standard ENET cable to connect to a network access

point, and be sure the instrument is on the same subnet as the controller.

You can also connect directly using TCP/IP, but depending on the

controller, you may need to use a cross-over cable.

Note: To use LXI on Windows 10 oscilloscopes, switch to the

Administrative User LCRYADMIN (p.41).

USBTMC and GPIB (with the optional USB-GPIB adapter) can also be used

to make a remote connection. To change the remote control setting from

the default VICP (TCP/IP), go to Utilities > Utilities Setup > Remote.

Printer

HDO9000 supports USB printers that are compatible with the Windows

OS installed on the oscilloscope. Connect the printer to any host USB

port, then go to File > Print Setup > Print and select Printer to configure

settings. Choose Properties to open the Windows print dialog.

Aux Out and Cal Out

The oscilloscope can output a pulse upon a trigger event or Pass/Fail

outcome. Connect a BNC cable from Aux Out on the front of the instrument

to the other device. Go to Utilities > Utilities Setup > Aux Output to

configure the output.

The Cal Out hook on the front can be set to output a direct current or

square wave of custom amplitude and frequency. Use the Aux Output

dialog to configure Cal Out.

Reference Clock

To input or output a reference clock, connect a BNC cable from Ref In

or Ref Out on the back of the instrument to the other instrument. Go to

Timebase > Horizontal Setup > Clock Source to configure the clock.

OVERVIEW

930536-00 Rev A

OVERVIEW

Built-in Carrying Handle

Ref In and Ref Out to input/

output external Reference Clock

AC Power Inlet

Kensington Lock

Andere Handbücher für HDO9000

Inhaltsverzeichnis

Andere Teledyne Lecroy Prüfgeräte Handbücher

Teledyne Lecroy

Teledyne Lecroy PP009-1 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4022 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 510 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO6000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy T3DSO3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy LabMaster 10 Zi-A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy T3AWG3K Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 780C Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP006D Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4104A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy CP030A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy FrontLine Harmony Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-250 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 780 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4024A-MS Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4000HD Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung