Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

WaveSurfer 3000

Getting Started Guide

WaveSurfer 3000 Getting Started Guide

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal sales

and distribution purposes is strictly prohibited. However, clients are encouraged to distribute and

duplicate Teledyne LeCroy documentation for their own internal educational purposes.

WaveSurfer, WaveScan and Teledyne LeCroy are trademarks of Teledyne LeCroy. Windows is a

registered trademark of Microsoft Corporation. Other product or brand names are trademarks or

requested trademarks of their respective holders. Information in this publication supersedes all

earlier versions. Specifications are subject to change without notice.

926057-00

July, 2015

WaveSurfer 3000

Getting Started Guide

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features unique to our instruments. This Getting Started

Guide is designed to cover important oscilloscope safety and installation information along with some basic operating procedures so you’re quickly

working with waveforms.

Introduction

About the WaveSurfer 3000 Oscillosocopes 2

Specifications 3

Materials List 3

General Safety Information 4

Support 5

Set Up

The Front of Your Oscilloscope 8

The Back of Your Oscilloscope 10

Carrying 11

Powering On/Off 11

Connecting 11

Micro SD Card 12

Probes 12

Digital Leadset 13

Software Activation 14

Firmware Updates 14

User Interface

Touch Screen Display 16

Changing the Display 18

Working With Traces 18

Entering/Selecting Data 20

Front Panel 21

Contents

Basics

Vertical 24

Horizontal (Timebase) 26

Triggers 27

Cursors 28

Zoom 29

Measurements & Statistics 30

Math 31

Memories (Reference Waveforms) 32

WaveSource 33

Documenting 34

Temperature Dependent Calibration 34

Software Options 35

Reference

Service 38

Teledyne LeCroy Service Centers 39

Certifications 40

Warranty 42

Windows License Agreement 42

WaveSurfer 3000

INTRODUCTION

About the WaveSurfer 3000 Oscillosocopes

WaveSurfer 3000 oscilloscopes feature the MAUI advanced user interface

with touch screen simplicity to shorten debug time. Quickly identify and

isolate anomalies with WaveScan, Fast Display, and History mode for

faster troubleshooting; LabNotebook enables easy documentation and

convenient collaboration. The advanced probeinterface, upgradable

bandwidth and multi-instrument capabilities provide maximum versatility

and investment protection.

MAUI - A New Wave of Thinking

MAUI is the most advanced oscilloscope user interface. MAUI is designed

for touch; all important oscilloscope controls are accessed through the

intuitive touch screen. MAUI is made for simplicity; time saving shortcuts

and intuitive dialogs simplify setup. MAUI is built to solve; deep set of

debug and analysis tools help identify problems and find solutions quickly.

Advanced Anomaly Detection

Combining a fast waveform update rate of 130,000 waveforms/second

with History mode waveform playback and WaveScan search and find, the

WaveSurfer 3000 is an outstanding tool for waveform anomaly detection.

Capture, Debug, Analyze, Document

The advanced active probe interface gives tremendous flexibility for

capturing all types of signals. Debug, analyze and document problems

through the use of powerful math and measurement capabilities,

Pass/Fail mask testing, sequence mode segmented memory, and

LabNotebook report generator.

Multi-Instrument Capabilities

Beyond traditional oscilloscope functionality the WaveSurfer 3000 has

a variety of multi-instrument capabilities including waveform generation

through a built-in function generator with arbitrary waveform capabilities,

protocol analysis with serial data trigger and decode, a digital voltmeter,

and logic analysis with an available 16-channel mixed signal option.

WaveSurfer 3000 Getting Started Guide

INTRODUCTION

Specications

Detailed specifications are maintained in the Datasheet on the product

page at teledynelecroy.com.

Key Specications

Bandwidth 200 MHz – 750 MHz

Channels 2 or 4

Sample Rate (all channels) 2 GS/s

Memory (per channel) 10 Mpts/ch

Digital Channels 16

Digital Sample Rate 500 MS/s

Minimum Detectable Pulse Width 4 ns

Maximum Input Frequency 125 MHz

Materials List

Check that you have all the parts listed here. Contact Teledyne LeCroy

immediately if any part is missing.

•1 oscilloscope

•2 or 4 passive probes (one for each channel)

•1 Micro SD Card (installed)

•1 AC power cord (rated for country)

•1 protective front cover

•1 Getting Started Guide

•1 Oscilloscope Registration Card

•1 Calibration Document

•1 CE Certificate

INTRODUCTION

General Safety Information

This section contains instructions that must be observed to keep the

instrument operating in a correct and safe condition. You are required to

follow generally accepted safety procedures in addition to the precautions

specified in this section. The overall safety of any system incorporating

this instrument is the responsibility of the assembler of the system.

Symbols

These symbols appear on the instrument’s front or rear panels and in its

documentation to alert you to important safety considerations.

CAUTION of damage to instrument, or WARNING of hazard to

health. Attend to the accompanying information to protect against

personal injury or damage. Do not proceed until conditions are fully

understood and met.

WARNING. Risk of electric shock.

Measurement ground connection.

Alternating Current.

On/Standby power.

Precautions

•Use proper power cord. Use only the power cord shipped with this

instrument and certified for the country of use.

•Maintain ground. This product is grounded through the power cord

grounding conductor. To avoid electric shock, connect only to a

grounded mating outlet.

•Connect and disconnect properly. Do not connect/disconnect probes

or test leads while they are connected to a voltage source.

•Observe all terminal ratings. Do not apply a voltage to any input (C1,

C2, C3, C4, EXT or Dig) that exceeds the maximum rating of that input.

Refer to the front of the oscilloscope for maximum input ratings.

•Use only within operational environment listed. Do not use in wet or

explosive atmospheres.

•Use indoors only.

•Keep product surfaces clean and dry.

•Do not block the cooling vents. Leave a minimum six-inch gap

between the instrument and the nearest object.

•Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

•Do not operate with suspected failures. Inspect all parts regularly

and do not use the product if any part is damaged. Cease operation

immediately and sequester the instrument from inadvertent use.

WaveSurfer 3000 Getting Started Guide

INTRODUCTION

Operational Environment

Temperature: 0° to 50° C

Humidity: Maximum relative humidity 90% for temperatures up to

31° C decreasing linearly to 50% relative humidity at 50° C

Altitudes: up to 3,048 m (at < 30° C)

Power and Ground Connections

The instrument operates from a single-phase, 100 to 240 Vrms (± 10%)

AC power source at 50/60 Hz (± 5%), or a 100 to 120 Vrms (± 10%) AC

power source at 400 Hz (± 5%). The instrument automatically adapts to

the line voltage. Manual voltage selection is not required.

The AC inlet ground is connected directly to the frame of the instrument.

For adequate protection again electric shock, connect to a mating outlet

with a safety ground contact.

WARNING. Interrupting the protective conductor inside or outside

the oscilloscope, or disconnecting the safety ground terminal,

creates a hazardous situation. Intentional interruption is prohibited.

Maximum power consumption with all accessories installed (e.g., active

probes, USB peripherals, digital leadsets) is 150 W (150 VA) for four-

channel models and 100 W (100 VA) for two-channel models. Power

consumption in standby mode is 4 W.

Cleaning

Clean only the exterior of the oscilloscope using a damp, soft cloth. Do

not use harsh chemicals or abrasive elements. Under no circumstances

submerge the instrument or allow moisture to penetrate it. Avoid electric

shock by unplugging the power cord from the AC outlet

before cleaning.

CAUTION. Do not attempt to clean internal parts.

Fuse Replacement

Disconnect the power cord before inspecting or replacing the fuse. Open

the fuse holder (located at the rear of the instrument below the AC power

inlet) using a small, flat-bladed screwdriver. Replace the old fuse with a

new 5 x 20 mm T-rated 3.15 A/250 V fuse. Close the fuse holder before

powering on.

WARNING. For continued fire protection at all line voltages, replace

the fuse with one of the specified type and rating only. Always

disconnect the power cord before replacing the fuse.

Support

Online Documentation

Teledyne LeCroy publishes a free Technical Library on its website.

Manuals, tutorials, application notes, white papers, and videos are

available to help you get the most out of your Teledyne LeCroy products.

The WaveSurfer 3000 Oscillosocopes Operator’s Manual can be

downloaded from teledynelecroy.com/support/techlib. This .PDF

document contains more extensive procedures for operating your

oscilloscope than are found here.

The Datasheet published on the product page contains the detailed

product specifications.

Technical Support

Registered users can contact their local Teledyne LeCroy service center

at the number listed in this guide to make Technical Support requests by

phone or email. You can also submit Technical Support requests via the

website at teledynelecroy.com/support/techhelp.

INTRODUCTION

Andere Handbücher für WaveSurfer 3000

Inhaltsverzeichnis

Andere Teledyne Lecroy Prüfgeräte Handbücher

Teledyne Lecroy

Teledyne Lecroy WaveMaster 8 Zi-B Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Summit Gen4 Test Platform Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP006D Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP066 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4000HD Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WavePro HD series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy T3DSO3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO9000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4000HD Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveRunner 9000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy FrontLine Harmony Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 780 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveJet Touch Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4032 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO8000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy AP034 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3104Z Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung