Teledyne Lecroy WaveSurfer 4000HD Bedienungsanleitung

WaveSurfer 4000HD Rackmount Accessory

Remove the outside top two screws from the back of the oscilloscopebody

using the T10 Torx driver.

Use the remaining two M4x10 Phillips screws to attach the positioning

brackets to the side plates behind the body of the oscilloscope.

Use the two M3x12 Phillips screws to secure the positioning brackets to the body

of the oscilloscope.

CAUTION: Do not block the

cooling vents on either side

or back of the oscilloscope.

Install the fully assembled rackmount into your equipment rack followingyour

manufacturer’s instructions.

For a complete list of Teledyne LeCroy offices by country, including our sales and

distribution partners, visit: teledynelecroy.com/support/contact

WaveSurfer and Teledyne LeCroy are trademarks of Teledyne LeCroy, Inc. Other product or brand names are

trademarks or requested trademarks of their respective holders. Information in this publication supersedes all

earlier versions. Specifications are subject to change without notice.

Unless otherwise specified, all materials and processes are compliant with RoHS Directive 2011/65/EU in its

entirety, inclusive of any further amendments or modifications of said Directive. For the full list of current

certifications, see the EC Declaration of Conformity shipped with the product.

933085-00 Rev A

wavesurfer-4000hd-rackmount-instructions.pdf

February, 2021

WaveSurfer 4000HD Rackmount Accessory

Thank you for purchasing a Teledyne LeCroy WaveSurfer 4000HD rackmount

accessory. Please review these instructions before installing the rackmount.

Parts

The rackmount kit is shipped with the following parts. Contact our Customer Service if

parts are missing.

Parts

QTY

Face plate

Handles for face plate

Base plate

Side plates (1 ea. left and right)

Positioning brackets

M3x12 pan-head Phillips screws

M4x10 pan-head Phillips screws

M5x10 pan-head Phillips screws

Note: The kit does not include the fasteners needed to attach the rackmount to your

rack. Consult your rack manufacturer regarding the appropriate type, size and number

of fasteners required to install the rackmount securely.

Tools

You will need a Phillips screwdriver and a T10 Torx driver to attach the rackmount to

the oscilloscope.

Dimensions

The rackmount is designed to occupy 7U of a standard EIA 19-inch rack.

Installed Dimensions

Metric

English

Weight

7.9 kg

17.42 lbs

Height

310 mm

12.20 in

Width at face plate

480 mm

18.90 in

Width behind face plate

430 mm

16.93 in

Depth with handles

210 mm

8.27 in

Depth without handles

142 mm

5.59 in

933085-00 Rev A 1

WaveSurfer 4000HD Rackmount Accessory

Using the T10 Torx driver, remove the feet from the oscilloscope.

Attach the side plates to the base plate using six M4x10 Phillips screws.

Note: The left- and right-side plates are not interchangeable. Be sure the “wings”

are on the side of the base plate without the lip, turning outward, as shown.

Assembly Instructions

Attach the handles to the face plate using the four M5x10 Phillips screws, then

attach the face plate to the side plates using eight M4x10 Phillips screws.

Note: Be sure the thinner rib of the face plate is on top, as shown below.

Place the oscilloscope on the base plate flush with the face plate. The screen

should be fully visible and the front bezel should extend slightly past the face

plate when seated properly.

Andere Handbücher für WaveSurfer 4000HD

Andere Teledyne Lecroy Prüfgeräte Handbücher

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4000HD Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 10 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy RP2060 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3104Z Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy T3AWG3K Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy ZS1000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-250 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WavePro HD series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP066 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4022 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP006D Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000z Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PXP500 PCI Express Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP009-1 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveMaster 8 Zi-B Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveJet Touch Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO8000 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung