Teledyne Lecroy MS-500 Bedienungsanleitung

Operator’s

Manual

MS-500 Mixed Signal

Oscilloscope Option

MS-500

Mixed-Signal Oscilloscope Option

Operator’s Manual

January 2013

Unauthorized duplication of Teledyne LeCroy documentation materials other than for

internal sales and distribution purposes is strictly prohibited. However, clients are

encouraged to distribute and duplicate Teledyne LeCroy documentation for their own

internal educational purposes.

Teledyne LeCroy is a registered trademark of Teledyne LeCroy, Inc. Windows is a registered

trademark of Microsoft Corporation. Other product or brand names are trademarks or

requested trademarks of their respective holders. Information in this publication supersedes

all earlier versions. Specifications are subject to change without notice.

Warranty

NOTE: THE WARRANTY BELOW REPLACES ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS,

OR ADEQUACY FOR ANY PARTICULAR PURPOSE OR USE. TELEDYNE LECROY SHALL NOT BE

LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN

CONTRACT OR OTHERWISE. THE CUSTOMER IS RESPONSIBLE FOR THE TRANSPORTATION

AND INSURANCE CHARGES FOR THE RETURN OF PRODUCTS TO THE SERVICE FACILITY.

TELEDYNE LECROY WILL RETURN ALL PRODUCTS UNDER WARRANTY WITH TRANSPORT

PREPAID.

The MS 500 is warranted for normal use and operation, within specifications, for a period of

three years from shipment. Teledyne LeCroy will either repair or, at our option, replace any

product returned to one of our authorized service centers within this period. However, in

order to do this we must first examine the product and find that it is defective due to

workmanship or materials and not due to misuse, neglect, accident, or abnormal conditions

or operation.

Teledyne LeCroy shall not be responsible for any defect, damage, or failure caused by any of

the following: a) attempted repairs or installations by personnel other than Teledyne LeCroy

representatives or b) improper connection to incompatible equipment, or c) for any damage

or malfunction caused by the use of non-Teledyne LeCroy supplies. Furthermore, Teledyne

LeCroy shall not be obligated to service a product that has been modified or integrated

where the modification or integration increases the task duration or difficulty of servicing

the oscilloscope. Spare and replacement parts, and repairs, all have a 90-day warranty.

922245-00 Rev A

January 2013

Operator’s Manual

922245-00 Rev A

TABLE OF CONTENTS

Welcome ..................................................................................1

Safety Instructions ....................................................................2

Symbols.....................................................................................2

Precautions ...............................................................................2

Operating Environment ............................................................3

Cleaning.....................................................................................3

Returning a Product for Service or Repair ................................3

Technical Support .....................................................................4

Staying Up-to-Date....................................................................4

Standard Equipment .................................................................5

MS-500 Standard Hardware .....................................................5

The MS-500 Software ...............................................................7

Accessories................................................................................7

Description of Operation.........................................................10

Getting Started with the MS-500 .............................................11

Overview .................................................................................11

Connecting MS-500 to the Oscilloscope .................................12

Verifying Proper Connection to Oscilloscope

and Device Under Test............................................................14

Digital Connections .................................................................15

Threshold Levels .....................................................................16

Minimum Voltage Swing.........................................................16

Accessing the MS-500 Toolset ................................................17

Oscilloscope Analog Trigger and MS-500 Digital Trigger........18

Digital Trace Groups................................................................19

Digital Logic Threshold Setup..................................................22

Digital Trigger Setup................................................................24

Logic Bus Trigger Setup...........................................................26

Digital Logic Threshold Setup..................................................27

MS-500 Mixed Signal Oscilloscope Option

922245-00 Rev A

Characterize Digital or Mixed Signal ........................................ 28

System Performance Overview.............................................. 28

Using Cursors.......................................................................... 28

Using Measurement Parameters ........................................... 29

Measurement Gating ............................................................. 30

Using Statistics and Graphing................................................. 30

Isolate and Analyze Signal Activity .......................................... 31

Zooming Waveforms.............................................................. 31

Reference............................................................................... 33

Certifications .......................................................................... 33

Specifications ......................................................................... 36

Contact Teledyne LeCroy ....................................................... 38

Operator’s Manual

922245-00 Rev A 1

Welcome

Thank you for purchasing a Teledyne LeCroy MS-500.

The MS-500 Mixed Signal Oscilloscope Option is a powerful solution for the

challenge of measuring multiple, mixed signals in a single oscilloscope. An

enhancement to the Teledyne LeCroy oscilloscopes, the MS-500 extends

their testing range by adding 18 or 36 digital channels for display or

triggering.

The MS-500 is ideally suited for embedded controller testing where there is

a proliferation of analog signals coincident with digital signals. Users can

easily debug signals using standard oscilloscope tools such as cursors,

measurement parameters, and zooming. Both oscilloscopes compatible

with the MS-500 feature large, bright color displays to facilitate signal

viewing, plus all the connectivity and documentation capabilities needed to

quickly record and distribute information.

The MS-500 and MS-500-36 are identical except the MS-500-36 standard

configuration is for 36 channels. The MS-500-36 can be operated in 36 or

18 channel mode for higher performance. The MS-500 is configured as an

18 channel instrument and can be upgraded with an additional lead set to

support 36 channels. Both are referred to as MS-500 in this manual.

This MS-500 manual assumes that you have a basic understanding of

discrete electronics, logic analyzers, and Teledyne LeCroy oscilloscopes,

specifically the model you will use with the MS-500. When necessary,

details on specific oscilloscope features are included in this manual.

Contact your nearest Teledyne LeCroy customer service center or national

distributor if anything is missing or damaged. We can only be responsible

for replacement if you contact us immediately.

Sincerely,

David C. Graef

Teledyne LeCroy Corporation

Vice President and Chief Technology Officer

MS-500 Mixed Signal Oscilloscope Option

922245-00 Rev A

Safety Instructions

This section contains instructions that must be observed to keep the

instrument operating in a correct and safe condition. You are required to

follow generally accepted safety procedures in addition to the precautions

specified in this section. The overall safety of any system incorporating

this instrument is the responsibility of the assembler of the system.

Symbols

These symbols appear on the instrument's front or rear panels and in its

documentation to alert you to important safety considerations.

CAUTION of damage to instrument, or WARNING of hazard to health.

Attend to the accompanying information to protect against personal

injury or damage. Do not proceed until conditions are fully

understood and met.

ELECTROSTATIC DISCHARGE (ESD) HAZARD. Susceptible to damage if

anti-static measures are not taken.

DOUBLE INSULATION

Precautions

Connect and disconnect properly.

Do not overload. To avoid electric shock or fire, do not apply any potential

to the signal leads that exceeds the maximum rating of the instrument.

Refer to Specifications section of the manual for details.

Comply with voltage derating curve. When measuring higher frequency

signals, comply with the Voltage vs. Frequency Derating Curve, contained in

the Specifications section of the manual.

Use only within operational environment listed. Do not use in wet or

explosive atmospheres.

Use indoors only.

Keep product surfaces clean and dry.

Do not operate with suspected failures. Do not use the product if any part

is damaged. Cease operation immediately and sequester the instrument

from inadvertent use.

Operator’s Manual

922245-00 Rev A 3

Operating Environment

Temperature:

5 to 40 °C

Humidity:

Maximum relative humidity 80% (non-condensing)

for temperatures up to 31° C decreasing linearly to

50% relative humidity at 40° C

Altitude:

Up to 2,000 m

Cleaning

Clean only the exterior of the instrument using a damp, soft cloth. Do not

use harsh chemicals or abrasive elements. Under no circumstances

submerge the instrument or allow moisture to penetrate it.

CAUTION. Do not attempt to clean internal parts. Refer to qualified

service personnel.

Returning a Product for Service or Repair

If you suspect that you have a problem with the MS-500, you should first

contact your local Teledyne LeCroy service center so that they can

ascertain whether this component is defective.

If you need to return a Teledyne LeCroy product, provide model

identification by providing the model name and serial number, describe the

defect or failure, and give us your name and telephone number. For factory

returns, use a Return Authorization Number (RAN), which you can get from

customer service. Write the number clearly on the outside of the shipping

carton. Return products requiring only maintenance to your local customer

service center. Within the warranty period, transportation charges to the

service center are your responsibility.

Products under warranty are then returned to you with transport prepaid

by Teledyne LeCroy. Outside the warranty period, you provide us with a

purchase order number before the work can be done. You are also billed

for parts and labor related to the repair work and shipping.

It is highly recommended to prepay return shipments and use air freight.

Teledyne LeCroy cannot accept COD (Cash On Delivery) or Collect Return

shipments.

MS-500 Mixed Signal Oscilloscope Option

922245-00 Rev A

Technical Support

You can get assistance with installation and operation from your customer

service center. Visit the Teledyne LeCroy Web site at teledynelecroy.com

for the center nearest you.

Staying Up-to-Date

Your MS-500 hardware does not need periodic calibration.

Teledyne LeCroy offers state-of-the-art performance by continually refining

and improving the instrument’s capabilities and operation. We frequently

update both firmware and software during service, free of charge during

warranty. Therefore, MS-500 specific software may be periodically

updated. You can download firmware and software updates from the

Teledyne LeCroy website.

Since software is continuously updated, the dialog boxes and menus you

see in your program may be slightly different than what is shown in this

manual. These differences should not affect your understanding of

correctly operating the MS-500.

Andere Handbücher für MS-500

Inhaltsverzeichnis

Andere Teledyne Lecroy Prüfgeräte Handbücher

Teledyne Lecroy

Teledyne Lecroy HDO6000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook HDO6000B Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WavePro HD series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP066 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy T3DSO3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-250 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy ZS1000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4024A-MS Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy LabMaster 10 Zi-A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveRunner/MDA 8000HD Series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveRunner 9000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000z Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy FrontLine Harmony Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveMaster 8 Zi-B Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000z Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO9000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy CP030A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 780C Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4032 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 4000HD Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung