Teledyne Lecroy WaveJet Touch Bedienungsanleitung

WaveJet Touch

Getting Started Guide

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977

1.800.5.LECROY •teledynelecroy.com

Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal sales

and distribution purposes is strictly prohibited. However, clients are encouraged to distribute and

duplicate Teledyne LeCroy documentation for their own internal educational purposes.

WaveJet and Teledyne LeCroy are trademarks of Teledyne LeCroy. Other product or brand names

are trademarks or requested trademarks of their respective holders. Information in this publication

supersedes all earlier versions. Specifications are subject to change without notice.

926062-00 Rev A

January, 2018

WaveJet Touch

Oscilloscopes

Getting Started Guide

Welcome

Thank you for buying a Teledyne LeCroy product. We’re certain you’ll be pleased with the detailed features unique to our instruments. This Getting Started

Guide is designed to cover important safety and installation information for your oscilloscope, along with some basic operating procedures so you’re quickly

working with waveforms.

Introduction

About the WaveJet Touch Oscilloscopes 2

Specifications 2

Materials List 2

General Safety Information 3

Support 4

Set Up

The Front of Your Oscilloscope 6

The Back of Your Oscilloscope 8

Carrying 9

Powering On/Off 9

Connecting 9

Probes 10

Firmware Updates 10

User Interface

Touch Screen Display 12

Touch Menus 15

Language Selection 15

Front Panel 16

Contents

Basics

Turning On/Off Traces 18

Replaying Traces 18

Vertical 19

Horizontal (Timebase) 20

Zoom 21

Triggers 22

Cursors 23

Measurements & Statistics 24

Math 25

Reference Waveforms (Memories) 26

Print 27

Utilities 27

Display 28

Save/Recall 28

Reference

Service 30

Warranty 31

Certifications 32

WaveJet Touch Oscilloscopes

INTRODUCTION

About the WaveJet Touch Oscilloscopes

The WaveJet Touch provides the banner specifications, feature set,

and user interface to simplify how you work and shorten debug time.

The portable design features a 7.5” touch screen display, providing the

convenience of performing all operations by directly touching the display.

With up to 5 Mpts of memory and 2 GS/s, the WaveJet Touch allows

you to easily capture and see every detail of your waveform. Mask and

Pass/Fail testing enable you to dig deeper and perform characterization

and validation with ease. Replay mode lets you go back in time to

view and analyze rare events. Altogether, these capabilities make the

WaveJet Touch the right oscilloscope for maximum value with minimum

investment.

Long Capture Time

The 2.5 Mpts/Ch memory eliminates the tradeoff between long capture

and high sample rate by providing long capture at full 2 GS/s sample

rate. The long memory makes the WaveJet Touch a great tool for viewing

signals that have low frequency and/or high frequency components.

Replay Mode

The fast update rate shows runts and glitches as they occur, but it is hard

to tell exactly when they occurred. Replay mode lets you go back in time

to isolate those anomalies, measure them with parameters or cursors, and

quickly find the source of the problem.

Specications

Detailed specifications are maintained on the product Datasheet, which

can be accessed through: teledynelecroy.com/oscilloscopes/

Key Specications

Bandwidth 350 MHz–500 MHz

Channels 4

Sample Rate (all channels) 1 GS/s

Sample Rate (interleaved) 2 GS/s

Memory (per channel) 2.5 Mpts/ch

Memory (interleaved) 5 Mpts/ch

Materials List

Check that you have all the parts listed here. Contact Teledyne LeCroy

immediately if any part is missing.

•1 oscilloscope

•4 passive probes

•1 AC power cord (rated for country)

•1 protective front cover

•1 Getting Started Guide

•1 Oscilloscope Security Certificate

•1 Oscilloscope Registration Card

•1 Calibration Document

WaveJet Touch Getting Started Guide

INTRODUCTION

General Safety Information

This section contains instructions that must be observed to keep the

instrument operating in a correct and safe condition. You are required to

follow generally accepted safety procedures in addition to the precautions

specified in this section. The overall safety of any system incorporating

this instrument is the responsibility of the assembler of the system.

Symbols

These symbols appear on the instrument’s front or rear panels and in its

documentation to alert you to important safety considerations.

CAUTION of damage to instrument, or WARNING of hazard to

health. Attend to the accompanying information to protect against

personal injury or damage. Do not proceed until conditions are fully

understood and met.

WARNING. Risk of electric shock.

Measurement ground connection.

Alternating Current.

On/Standby power.

Precautions

• Use proper power cord. Use only the power cord shipped with this

instrument and certified for the country of use.

• Maintain ground. This product is grounded through the power cord

grounding conductor. To avoid electric shock, connect only to a

grounded mating outlet.

• Connect and disconnect properly. Do not connect/disconnect probes

or test leads while they are connected to a voltage source.

• Observe all terminal ratings. Do not apply a voltage to any input (CH1,

CH2, CH3, CH4, or EXT) that exceeds the maximum rating of that input.

Refer to the front of the oscilloscope for maximum input ratings.

• Use only within operational environment listed. Do not use in wet or

explosive atmospheres.

• Use indoors only.

• Keep product surfaces clean and dry.

• Do not block the cooling vents. Leave a minimum six-inch gap

between the instrument and the nearest object. Keep the underside

clear of papers and other objects.

• Do not remove the covers or inside parts. Refer all maintenance to

qualified service personnel.

• Do not operate with suspected failures. Inspect all parts regularly

and do not use the product if any part is damaged. Cease operation

immediately and sequester the instrument from inadvertent use.

INTRODUCTION

Operational Environment

Temperature: 0° to 40° C

Humidity: Maximum RH 80% for temperatures up to 30° C decreasing

linearly to RH 55% at 40° C, no dew condensation allowed.

Altitudes: up to 3,000 m (at < 25° C)

Power and Ground Connections

The instrument operates from a single-phase, 100-240 Vrms (± 10%)

AC power source at 50/60 Hz (± 5%), or a 100-120 Vrms (± 10%) AC

power source at 400 Hz (± 5%). The instrument automatically adapts to

the line voltage. Manual voltage selection is not required.

The AC inlet ground is connected directly to the frame of the instrument.

For adequate protection against electric shock, connect to a mating outlet

with a safety ground contact.

WARNING. Interrupting the protective conductor inside or outside

the oscilloscope, or disconnecting the safety ground terminal,

creates a hazardous situation. Intentional interruption is prohibited.

Maximum power consumption with all accessories installed (e.g., probes,

USB peripherals) is 50 W (85 VA). Power consumption in standby mode

is 2 W.

Cleaning

Clean only the exterior of the oscilloscope using a damp, soft cloth. Do

not use harsh chemicals or abrasive elements. Under no circumstances

submerge the instrument or allow moisture to penetrate it. Avoid electric

shock by unplugging the power cord from the AC outlet before cleaning.

CAUTION. Do not attempt to clean internal parts.

Calibration

The oscilloscope has automatic and self calibration routines. When Auto

calibration is enabled, a recalibration will automatically occur whenever

there is a 5° C temperature change since the last power-on or auto

calibration. Self calibration enables you to perform a calibration on

demand. The Self calibration requires about one minute to complete.

We recommend returning the oscilloscope for factory calibration once per

year. See the instructions on p. 30 for returning a product for service.

Support

Online Documentation

Online Help for using the oscilloscope is available by pressing the Help

button on the front panel.

Teledyne LeCroy publishes a free Technical Library on its website.

Manuals, tutorials, application notes, white papers, and videos are

available to help you get the most out of your Teledyne LeCroy products.

The WaveJet Touch Oscilloscopes Operator’s Manual can be downloaded

from teledynelecroy.com/support/techlib/productmanuals.

This .PDF document contains more extensive procedures for operating

your oscilloscope than are found here.

The Datasheet published on the product page contains the detailed

product specifications.

Technical Support

Registered users can contact their local Teledyne LeCroy service center

at the number listed in this guide to make Technical Support requests by

phone or email. You can also submit Technical Support requests via the

website at teledynelecroy.com/support/techhelp.

WaveJet Touch Oscilloscopes

SET UP

The Front of Your Oscilloscope

Touch Screen Display

Front Panel

Power Button

USB Port

BNC Connectors for

CH1-CH4 and EXT

Ground and Calibration

Output Terminals

Tilting Feet

Inhaltsverzeichnis

Andere Teledyne Lecroy Prüfgeräte Handbücher

Teledyne Lecroy

Teledyne Lecroy WavePro HD series Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4022 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO9000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 980 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 510 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3104Z Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy RP2060 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy AP033 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy CP030A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO6000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy frontline TLF 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy AP034 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Summit Gen4 Test Platform Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MS-500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3024Z Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PXP500 PCI Express Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HDO4000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 780 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP006D Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveSurfer 3000 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung