Teledyne AX300 Bedienungsanleitung

Portable Oxygen Analyzer

Teledyne Analytical Instruments i

OPERATING & SERVICE INSTRUCTIONS FOR

AX300

PORTABLE OXYGEN ANALYZER

TYPE B APPLIED PART:

Equipment provides a degree of protection against electric shock,

particularly regarding—

• Allowable Leakage Current

• Reliability of the protective earth connection (if present)

P/N M75389

Sep 18, 2009

CO 09-0159

AX300

Teledyne Analytical Instruments ii

No part of this manual may be reproduced, transmitted, transcribed, stored in a retriev-

al system, or translated into any other language or computer language in whole or in

part, in any form or by any means, whether it be electronic, mechanical, optical, ma-

nual, or otherwise, without prior written consent of Teledyne Analytical Instruments,

16830 Chestnut Street, City of Industry, CA 91749-1580, USA.

Warranty

Teledyne warrants that the goods are free from defects of material and of construction

for a period of 2 years (or less, as the case may be, with consumables) from the date of

shipment from Teledyne. The liability of Teledyne, if any, shall be limited solely to the

replacement or repair of the goods, and shall not include shipping costs or other inci-

dental damages as defined in Section 2-715 of the U.S. Uniform Commercial Code.

Teledyne cannot warrant any damage resulting from unauthorized repair, misuse, im-

proper maintenance, negligence, or other events not caused by Teledyne or our goods.

CAUTION: FEDERAL LAW RESTRICTS THIS DEVICE TO SALE BY OR

ON THE ORDER OF A PHYSICIAN.

Portable Oxygen Analyzer

Teledyne Analytical Instruments iii

About This Manual

This Manual describes the installation, configuration, operation and

maintenance instructions for Model AX300 portable oxygen analyzer.

This Manual contains Cautions, Warnings, and Notes to ensure safe

and efficient performance of the analyzer.

For convenience with operating and maintaining your analyzer, this

manual includes Specifications, Troubleshooting and Maintenance Spare

Parts sections.

How To Use This Manual

This manual is designed to walk you through the initial set-up of

the AX300 Portable Oxygen Analyzer. After you have used it to initially

commission your analyzer, it becomes a quick reference guide to help

you with specific questions or operating challenges.

Before operating the analyzer for the first time, you are advised to

read and familiarize yourself with the contents of this manual.

AX300

Teledyne Analytical Instruments iv

Safety Messages

Your safety and the safety of others are very important. Please care-

fully read and understand the Caution, Warning and Notes found in sev-

eral places in the manual.

CAUTION: THE ANALYZER SHOULD ONLY BE USED FOR THE PUR-

POSES AND IN THE MANNER DESCRIBED IN THIS MA-

NUAL.

IF YOU USE THE ANALYZER IN A MANNER OTHER THAN

THAT FOR WHICH IT WAS INTENDED, UNPREDICTABLE

BEHAVIOR COULD RESULT POSSIBLY ACCOMPANIED

WITH HAZARDOUS CONSEQUENCES.

Portable Oxygen Analyzer

Teledyne Analytical Instruments v

Table of Contents

Safety Messages ..........................................................................iv

List of Figures..............................................................................vii

List of Tables..............................................................................viii

Introduction ...................................................................................1

1.1 Features 2

1.2 Options 3

1.3 Applications 3

1.4 Operation Summary 3

Operating Instructions..................................................................6

2.1 Setup 6

2.1.1 Sensor Installation or Replacement 6

2.1.2 Mounting 8

2.1.2.1 V-Mount Adapter Installation 8

2.1.2.2 Universal Mounting Clamp Installation 9

2.1.3 Battery Installation 9

2.1.4 Calibration 10

2.1.5 Output 0-1 VDC or RS232 12

2.2 Operating Instructions 15

2.2.1 Procedure 15

2.3 Factors Affecting Sampling Accuracy 16

2.3.1 Humidity 16

2.3.2 Temperature 16

2.3.3 Pressure 16

2.3.4 Discrepancy in Readings 17

2.3.5 Anesthetic Gases 17

2.3.5.1 Gases That MAY INDUCE Reading Error 17

AX300

Teledyne Analytical Instruments vi

2.3.5.2 Care After Use in Nitrous Oxide 18

2.3.6 Cleaning 19

2.4 Dos and Don’ts 19

Service Instructions....................................................................21

3.1 General Service Information 21

3.2 Overall Maintenance 21

3.3 Battery Maintenance 21

3.4 Sensor Maintenance 22

3.5 Calibration 22

3.6 Factors Affecting Sampling Accuracy 22

3.7 Troubleshooting 22

3.8 Watchdog 25

3.9 Other Problems with the Analyzer 26

3.10 Return Authorization for Service 26

Appendix......................................................................................28

A.1 Specifications 28

A.2 Spare Parts List 29

A.3 Optional Accessories 29

Portable Oxygen Analyzer

Teledyne Analytical Instruments vii

List of Figures

Figure 1-1: AX300 Front View ......................................................... 1

Figure 2-1: Installing the R17MED Sensor ...................................... 7

Figure 2-2: Sensor Cable Connection to Analyzer ......................... 7

Figure 2-3: Mounting the Sensor in the Tee Adapter....................... 8

Figure 2-4: V-Mount Adapter Installation......................................... 8

Figure 2-5: Brass Insert for Universal Mounting Clamp................... 9

Figure 2-6: Installing Batteries....................................................... 10

Figure 2-7: Calibration Sequence.................................................. 11

Figure 2-8: 0-1 VDC or RS 232 Digital Output Port ....................... 13

AX300

Teledyne Analytical Instruments viii

List of Tables

Table 2-1: Oxygen Reading Error in a Mixture of Anesthetic Gas. 17

Table 3-1 Troubleshooting ............................................................ 23

Table 3.2 Error Codes................................................................... 25

Portable Oxygen Analyzer Introduction

Teledyne Analytical Instruments 1

Introduction

The Teledyne Analytical Instruments AX300 Oxygen Analyzer, he-

reinafter referred to as AX300 or analyzer, is a portable analyzer de-

signed to analyze oxygen concentration in medical gas mixtures. Oxy-

gen analysis is linear across the single range of 0-100% using Tele-

dyne’s class R17MED oxygen sensor.

Figure 1-1: AX300 Front View

The AX300’s liquid crystal display (LCD) consists of up to 3.5

characters plus a decimal point indicator capable of displaying up to

105%. An integral battery life indicator is displayed continuously on the

AX300.

The analyzer is powered by three AA alkaline batteries and is de-

signed to operate for 2000 hours on a single set of batteries in a Non-

alarm State.

A sensor failure alarm is incorporated which warns the user if the

sensor signal is lost or low. When this occurs, the √SENSOR display

Introduction AX300

Teledyne Analytical Instruments 2

and a visual green light will flash, and the alarm buzzer will activate.

This alarm condition is also triggered when the oxygen concentration at

the point of analysis falls below 18% (Reference: ISO 7767 standard).

For safety reasons, the audible alarm cannot be silenced until the alarm

condition is resolved.

CAUTION: DURING NORMAL USE, ALARM CONDITIONS SHOULD

NOT BE OVERRIDDEN BY ACTIONS SUCH AS HOLDING

THE ALARM SILENCE KEY DEPRESSED OR REMOVING

THE BATTERIES. THE CAUSE FOR THE ALARM CONDI-

TION SHOULD FIRST BE RESOLVED.

CAUTION: WHILE HOLDING DOWN THE ALARM SILENCE KEY MAY

MOMENTARILY SILENCE THE ALARM BUZZER, AUDIBLE

ALARM WILL RETURN UPON DISENGAGING THE ALARM

SILENCE KEY. HOLDING THE KEY FOR LONGER DURA-

TIONS WILL INITIATE THE “STUCK KEY” ALARM, WHICH

CAN BE DEACTIVATED ONLY VIA REMOVING THE BAT-

TERIES FROM THE ANALYZER. ANALYZER SHOULD BE

RECALIBRATED UP ON REPOWERING THE ANALYZER.

NOTE: THE ALARM SILENCE KEY DOES NOT PLAY ANY ROLE IN

THIS VERSION OF THE ANALYZER. IT IS DESIGNED IN

FOR ANY POSSIBLE FUTURE PRODUCT MODIFICATION.

1.1 Features

The following features are standard on the AX300:

Large easy to read 3½-digit LCD (see options)

Automatic LCD back lighting upon key press

Microprocessor controlled

Sensor fail/disconnect alarm indicator (audible and visual)

Non-adjustable concentration alarm below 18% O2

2000 operating hours from 3 AA alkaline batteries

Battery status indicator

Stand for upright tabletop deployment

Optional hardware for pole clamping and V block support

Rugged high impact ABS plastic construction

Splash resistant case

Long life class R17MED sensor

Andere Handbücher für AX300

Inhaltsverzeichnis

Andere Teledyne Analytisches Instrument Handbücher

Teledyne

Teledyne 402R-EU Bedienungsanleitung

Teledyne

Teledyne 3300TA Bedienungsanleitung

Teledyne

Teledyne 7600 Bedienungsanleitung

Teledyne

Teledyne 318R Bedienungsanleitung

Teledyne

Teledyne T802 Bedienungsanleitung

Teledyne

Teledyne 3010TAC Bedienungsanleitung

Teledyne

Teledyne 3000PA Bedienungsanleitung

Teledyne

Teledyne TED 200-T Bedienungsanleitung

Teledyne

Teledyne 3000TB Bedienungsanleitung

Teledyne

Teledyne 2020 Bedienungsanleitung

Teledyne

Teledyne 3010PAC Bedienungsanleitung

Teledyne

Teledyne 9700 Bedienungsanleitung

Teledyne

Teledyne 6400A Bedienungsanleitung

Teledyne

Teledyne 3000TA-XL-EU Bedienungsanleitung

Teledyne

Teledyne 7500 Series Bedienungsanleitung

Teledyne

Teledyne T3AWG2152 Bedienungsanleitung

Teledyne

Teledyne 3000MB Bedienungsanleitung

Teledyne

Teledyne 5000B Bedienungsanleitung

Teledyne

Teledyne 3300PA Bedienungsanleitung

Teledyne

Teledyne 335 Series Bedienungsanleitung

Teledyne

Teledyne 3010MB Bedienungsanleitung

Teledyne

Teledyne 3500 Series Bedienungsanleitung

Teledyne

Teledyne 3300PB Bedienungsanleitung

Teledyne

Teledyne 311 Bedienungsanleitung

Beliebte Analytisches Instrument Handbücher anderer Marken

Cocraft

Cocraft NLT04 Bedienungsanleitung

M&C

M&C GENTWO PMA1000 Bedienungsanleitung

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Bedienungsanleitung

CONDTROL

CONDTROL XP4 PRO Bedienungsanleitung

Extech Instruments

Extech Instruments BR200 Bedienungsanleitung

Dewetron

Dewetron DEWE-30-16 Produkthandbuch

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Montage- und Bedienungsanleitung

RIDGID

RIDGID SeeSnake Compact Bedienungsanleitung

YDLIDAR

YDLIDAR TIA Bedienungsanleitung

Olympus

Olympus IPLEX FX Series Bedienungsanleitung

Bosch

Bosch GLM 50 C Professional Bedienungsanleitung

Reflecta

Reflecta DigiEndoscope Bedienungsanleitung

Chinavision

Chinavision CVACZ-G696 Montageanleitung

Fuji Electric

Fuji Electric ZKMA Bedienungsanleitung

VOLTCRAFT

VOLTCRAFT IC-100HD Bedienungsanleitung

RIDGID

RIDGID micro CA-25 Bedienungsanleitung

Würth

Würth MASTERVISION MINI REC Bedienungsanleitung

AMI

AMI 2001LC Bedienungsanleitung