SP-F-SIM
Flame Simulators
USER MANUAL
SP-F-SIM-EN
Revision 1.0
Limitation of Liability
•The Company Teledyne Gas and Flame Detection, hereinafter referred to as Teledyne Gas
and Flame detection throughout this document, shall not be held responsible for any
damage to the equipment or for any physical injury or death resulting in whole or in part
from the inappropriate use or installation of the equipment, non-compliance with any and
all instructions, warnings, standards and/or regulations in force.
•No business, person or legal entity may assume responsibility on behalf of Teledyne Gas
and Flame detection, even though they may be involved in the sale of Teledyne Gas and
Flame detection products.
•Teledyne Gas and Flame detection shall not be responsible for any direct or indirect
damage, or any direct or indirect consequence, resulting from the sale and use of any of its
products UNLESS SUCH PRODUCTS HAVE BEEN SELECTED BY Teledyne Gas and
Flame detection ACCORDING TO THE APPLICATION.
Ownership clauses
•The drawings, specifications, and information herein contain confidential information that is
the property of Teledyne Gas and Flame detection.
•This information shall not, either in whole or in part, by physical, electronic, or any other
means whatsoever, be reproduced, copied, divulged, translated, or used as the basis for
the manufacture or sale of Teledyne Gas and Flame detection equipment, or for any other
reason without the prior consent of Teledyne Gas and Flame detection.
Warning
•This is not a contractual document. In the best interest of its customers and with the aim of
improving performance, Teledyne Gas and Flame detection reserves the right to alter the
technical features of its equipment without prior notice.
•READ THESE INSTRUCTIONS CAREFULLY BEFORE THE FIRST USAGE: these instructions
should be read by all persons who have or will have responsibility for the use,
maintenance, or repair of the instrument.
•This instrument shall only be deemed to be in conformance with the published performance
if used, maintained, and repaired in accordance with the instructions of Teledyne Gas and
Flame detection by Teledyne Gas and Flame detection personnel or by personnel
authorized by Teledyne Gas and Flame detection.
