Tennant S30 XP Schulungshandbuch

IB 340883 (02--2008) 1

INSTRUCTION BULLETIN

No. 340883

Machine: S30 XP / X4

Published: 02--2008

Rev. 00

NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the

Parts List in the appropriate place in the machine manual for future

reference. Retaining the Parts List will make it easier to reorder

individual parts and will save the cost of ordering an entire kit.

NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.

Installation instructions for kit number 9004325

SYNOPSIS:

This kit contains the parts needed to replace the instrument panel label on S30 XP and S30 X4

machines.

Please follow step-by-step instructions.

SPECIAL TOOLS / CONSIDERATIONS: NONE

(Estimated time to complete: 1 hour)

PREPARATION:

1. Park machine on a clean level surface, turn off

machine, remove key, and set parking brake.

FOR SAFETY: Before leaving or servicing

machine, stop on level surface, set parking

brake, turn off machine, and remove key.

2. Disconnect the negative terminal from the

battery.

WARNING: Always disconnect battery

cables from machine before working on

electrical components.

3. Remove the hardware holding the panel

assembly to the dash. Discard the hardware.

Refer to Fig. 1.

FIG. 1

4. Carefully lift the panel assembly from the

dash and disconnect the main wire harness

from the panel assembly. Refer to Fig. 2.

FIG. 2

5. Set the panel assembly face down on a clean

flat surface.

IB 340883 (02--2008)2

INSTALLATION:

NOTE:Connect one end of the ground strap (4) to

ground and wrap the other end around wrist

before handling the control panel / instrument

panel label (1). The ground strap must be worn

whenever the control panel / new instrument

panel label are being handled.

1. Remove the back cover from the control

panel. Set the back cover and hardware

aside. Refer to Fig. 3.

FIG. 3

2. Remove the five fasteners and six standoffs

holding the circuit board to the panel

assembly. Set the fasteners, standoffs, and

eleven nylon washers aside. Refer to Fig. 4.

FIG. 4

3. Remove the circuit board from the instrument

panel and set the circuit board on a clean flat

surface. Refer to Fig. 5.

FIG. 5

4. Remove the eleven aluminum spacers from

the instrument panel label. Set the spacers

aside. Discard the instrument panel label.

Refer to Fig. 6.

FIG. 6

5. Place the eleven aluminum spacers onto the

new instrument panel label (1). Refer to Fig. 6.

NOTE:All aluminum spacers must be installed

onto the instrument panel label (1). Board could

be damaged if any standoffs are missing.

6. Use the hardware from Step 2 to install the

circuit board onto the instrument panel label

(1). Refer to Fig. 4.

IB 340883 (02--2008) 3

7. Reinstall the back cover plate onto the control

panel assembly. Refer to Fig. 3.

8. Reconnect the main wire harness to the panel

assembly. Refer to Fig. 2.

9. Use the five pan screws (2) and five nylon

washers (3) to reinstall the panel assembly

onto the dash. Refer to Fig. 1.

10. Reconnect the negative terminal to the

battery.

11. Start and test the machine. Verify the

machine operates properly.

Bill of Materials for Panel Kit, Label, Replmt [S30] -- 9004325

Ref.

Tennant

Part No. Description Qty.

o9004325 )Panel Kit, Label, Replmt [S30] 1

Y1 1045321 Panel Assy, Instrmt, w/Label, Replmt 1

Y2 1045487 Screw, Pan, Phl, M5 X 0.80 X 16, Blk 5

Y3 1012615 Washer, Flat, 0.19B 0.44D .03, Nyl, Blk 5

Y427964 Strap, Ground, Static, Disposable 1

TENNANT COMPANY

P. O. Box 1452

Minneapolis, MN 55440-1452

Dieses Handbuch passt für folgende Modelle

Andere Tennant Bodenreinigungsmaschine Handbücher

Tennant

Tennant 6600 Bedienungsanleitung

Tennant

Tennant T5E Bedienungsanleitung

Tennant

Tennant 1200 Produkthandbuch

Tennant

Tennant 6100 Schulungshandbuch

Tennant

Tennant 2510 Produkthandbuch

Tennant

Tennant 2260 Produkthandbuch

Tennant

Tennant M17 Series Schulungshandbuch

Tennant

Tennant EH2 Produkthandbuch

Tennant

Tennant 1160 Produkthandbuch

Tennant

Tennant S16 Schulungshandbuch

Tennant

Tennant 340513 Schulungshandbuch

Tennant

Tennant 432 Bedienungsanleitung

Tennant

Tennant S8 Produkthandbuch

Tennant

Tennant SpeedGleam 5 Bedienungs- und Montageanleitung

Tennant

Tennant 2360 Produkthandbuch

Tennant

Tennant F3 Produkthandbuch

Tennant

Tennant 2300 Produkthandbuch

Tennant

Tennant 6400 Bedienungsanleitung

Tennant

Tennant 515 Bedienungsanleitung

Tennant

Tennant 6550D Bedienungsanleitung

Tennant

Tennant 5680 Bedienungsanleitung

Tennant

Tennant 355 Bedienungsanleitung

Tennant

Tennant MM267 Bedienungsanleitung

Tennant

Tennant T7 Bedienungsanleitung

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch

BETCO

BETCO PB24 Bedienungsanleitung

IPC

IPC CT51-71 BT Bedienungsanleitung