Tennsco 1842 Bedienungsanleitung

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

PK-2570110

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #2570110

Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000

STORAGE CABINET, 42" High

Models 1842 & 2442 Counter-Height

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment,

hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification

or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified

or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS

AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers

place of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will

be borne by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

Mailing Address: TENNSCO CORP. Shipping Address: TENNSCO CORP.

P.O. Box 1888 201 Tennsco Drive

Dickson, TN 37056-1888 Dickson, TN 37055

(615) 446-8000 (800) 251-8184 (615) 446-8000 (800) 251-8184

GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various pieces

to avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance on your cabinet.

Congratulations on your purchase of a

Counter High Storage Cabinet from

Tennsco! Our cabinets provide abundant

storage space; the Model 1842

is 36"w x

18"d

x 42" tall, while the Model 2442 is

36"w x 24"d x 42" tall. Our cabinets are

rigidly constructed to give you

years of

dependable and

efficient service. Nylon

lock-bar guides ensure smooth,quiet

operation. A locking handle with two keys

provides a three-point locking system for

added security. Sturdy adjustable shelves

provide exceptional strength — up to

150 lbs. per shelf (evenly distributed) on the

18" deep cabinet and up to 200 lbs. per

shelf (evenly distributed) on the 24" deep

cabinet. And our baked-on powder finish adds

even more durability.

Tools needed: An 11/32" nut driver (provided free with unit); a hammer; and a flathead screwdriver.

Two people recommended for installation. Approximate assembly time: 15 to 25 minutes.

INSTALLATION OF 42"H STORAGE CABINET

1. The reference numbers used throughout this

sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as

they are mentioned.

Place the back (Ref.

No.

1) on a

padded

surface

with

the flanges

facing upward.

6. Attach the door frame assembly (Ref. No. 6) to the

cabinet body by placing it over the sides. Align the

weld studs with the slots in the left and right sides,

and attach using four nuts on each side.

3. Attach the left side (Ref. No. 2) to the back by

placing flange (A) around the back and bolting the

back and side together with four bolts and nuts

(Ref. Nos. 16 & 17). Be sure that the lances

on all shelf adjustment

strips (B) point in the

same direction.

5. Place the shelf (Ref. No. 5) into the shelf adjusting

strips somewhere near the center of the cabinet, to

hold the sides in an

upright position

while installing the

door frame assem-

bly and top. Be

sure the channeled

edge of the

shelf is to

the front.

(Don't be

too con-

cerned

about the

position of

the shelf at this

point. You may

move the shelf up or

down as desired later.) Make

sure that the rear and sides of the shelf aref well

seated into all four lances.

NOTE: You may use a flathead screwdriver to

slighty pry the lances outward if they are too tight

to insert the shelf edges into.

Flange goes

under back

All lances

point UP on

the back and

on both sides.

4. Attach the right side (Ref. No. 3) to the back in

the same manner as you did in step 3, again

making sure that the

lances on the shelf adjust-

ment strips are pointed in

the same direction as

those on the back

and left

side.

Channeled edge of shelf

is toward front of unit.

2. Turn the handle to the

open position, and place

the locking cam (Ref. No. 9) over the

square shank of the door handle. The

latch must be facing

downward as shown.

1. Place the locking handle (Ref. No. 8) on the

right hand door and

fasten with two

11/32"

hex head bolts and

lockwashers (Ref. No. 14).

Tighten with the provided

nut driver.

Handle/LockingSystemInstallationInstructions

4. Place the locking

cam retainer (Ref. No. 12)

over the square shank of

the door handle. Tap on

the edges of the cam

retainer with a hammer

until retainer sits firmly

against the locking cam.

3. With the handle

still in the open

position, hook the locking bars (Ref.

No. 10) to the locking cam (see "A" at

left). Then, hold the lock bars in

position while sliding the nylon lock

bar guide inserts (Ref. No. 11) over

the lock bar ends

and through the

door slots (see "B"

at left).

5. Attach the "dummy"

handle (Ref. No. 13) to

the left door

11/32"

hex-

head bolts and

lockwashers (Ref. No. 17).

8. Open the doors and place the bottom (Ref. No. 4)

in the lowest notch of the shelf adjusting strips on

the sides and back. The flange with the two holes

must face the front, and fits over the base plate of

the frame.

9. Cabinet must be level for doors

to open and close properly.

Insert a flathead screwdriver

into the two leveling holes and

turn the screws until the

cabinet is level.

7. Set the unit upright and attach the top by inserting

the weld-studs

into the holes

provided on

the left and

right sides.

The flange

should fit

over the

outside of

the rear of

the cabinet,

and theoff-

set should

be toward

the front.

Bolt

together by

attaching

nuts to the

weld studs

and inserting

bolts and nuts through the

holes along the back edge.

10. If center shelf is not at desired

level, move up or down as

needed.

Tennscomakeseveryefforttoensurethatallunitsshipcompletewithallpartsandarriveundamaged.However,should

your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper

replacement parts follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.

TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:

(This information may be sent to us online using the form at www.tennsco.com/replacement.cfm)



Model Number (1842 or 2442) 



Purchase Date



Description of part(s) needed and part 



Your company name

number(s) as shown in Parts List (above) 



Contact person's name



Color (i.e. Champagne, Medium Grey, etc.) 



Who the product was purchased from



Was item missing, or was it damaged? 



Your shipping address

Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Customer Service: (866) 446-8686 Fax: (866) 445-7260

If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.

REPLACEMENTPARTS

Cam Retainer

(Ref. No. 12)

Locking Cam

(Ref. No. 9)

Locking Handle

with Keys

(Ref. No. 8)

REF. NO. PART NO.

DESCRIPTION

1 Back panel 1 842BA 2 842BA

2 Left side 1 218LS 1 224LS

3 Right side 1 218RS 1 224RS

4 Bottom 1 043BO 1 044BO

5 Shelf 2 301 2 302

6 Door and frame assembly 1 2442FA 1 2442FA

7 Top 1 978CT 1 974CT

8 Locking Handle with keys & hardware 1 043LH 1 043LH

9 Locking cam* 1 944LC 1 944LC

10 Locking bar set 1 978LB 1 978LB

11 Locking bar guide insert (nylon)* 2 944GI 2 944GI

12 Cam retainer* 1 944CR 1 944CR

13 Dummy Handle 1 043DH 1 043DH

14 11/32 hex head bolt w/lockwasher* (not shown above) 4** 4**

15 Tennsco nut driver 1 TOOL-2 1 TOOL-2

16 #8-32 x 3/8"bolts* (not shown above) 15 ** 15 **

17 #8-32 nuts* (not shown above) 31 ** 31 **

*Included in Ref. No. 8, locking handle with keys and hardware (Part No. 043LH). **Available Locally

QTY.

Locking Bar Guide

NylonInsert

(Ref. No. 11)

Locking Bar Set

(Ref. No. 10)

Tennsco Nut Driver

(Ref. No. 15)

1842 (18"d cabinet) 2442 (24"d cabinet)

QTY. PART NO.

Right Side

(Ref. No. 3)

Left Side

(Ref. No. 2)

Top

(Ref. No. 7)

Back Panel

(Ref. No. 1)

Bottom

(Ref. No. 4)

Dummy

Handle

(Ref. No. 13)

Door and Frame

Assembly

(Ref. No. 8)

Dieses Handbuch passt für folgende Modelle

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco CC-30 Bedienungsanleitung

Tennsco

Tennsco zt7 Series Bedienungsanleitung

Tennsco

Tennsco FB-12 Bedienungsanleitung

Tennsco

Tennsco SR-59 Bedienungsanleitung

Tennsco

Tennsco Z Series Bedienungsanleitung

Tennsco

Tennsco 1471 Bedienungsanleitung

Tennsco

Tennsco CINCO NIVELES Bedienungsanleitung

Tennsco

Tennsco J1878A-N Bedienungsanleitung

Tennsco

Tennsco RGL-1236S Bedienungsanleitung

Tennsco

Tennsco 7224 Bedienungsanleitung

Tennsco

Tennsco B-3000 Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet 7220 Bedienungsanleitung

Tennsco

Tennsco B-8400 Bedienungsanleitung

Tennsco

Tennsco 1436 Bedienungsanleitung

Tennsco

Tennsco 1871 Bedienungsanleitung

Tennsco

Tennsco Stackable Workbench Drawer Unit Bedienungsanleitung

Tennsco

Tennsco 1-Wide Welded Base for Lockers without Legs Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco 1442 Bedienungsanleitung

Tennsco

Tennsco EB-12 Bedienungsanleitung

Tennsco

Tennsco Jumbo Storage Cabinet J1878SU Bedienungsanleitung

Tennsco

Tennsco SRS-601878 Series Bedienungsanleitung

Tennsco

Tennsco 1870RH Bedienungsanleitung

Tennsco

Tennsco RGL-1236S Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung