Tennsco RGL-1236S Bedienungsanleitung

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on the units.

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in

the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-2380319

Regal Shelving System

Model Series: RGL-1236S, RGL-1236A, RGL-1536S,

RGL-1536A, RGL-1836S, & RGL-1836A

Starter Unit Add-On Unit

ASSEMBLY OF REGAL SHELVING UNIT

Two people are recommended for assembly. Approximate assembly time: 30-40 minutes.

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

1. Determine whether you will be assembling a single unit, or multiple

units joined together. For a single unit, use two “L” uprights (Ref.

No. 1). For multiple units, use one “L” upright and one “T” upright

(Ref. No. 2).

NOTE: Supports are not fully seated unless you can see

an open space through the hole in the shelf support as

shown above.

Tool Required: Rubber Mallet

2. Examine the slots on the two uprights you have

selected. When an upright is standing up on end,

the narrow part of the keyhole slots should be

toward the oor, while the wide part should be

toward the top.

3. After determining which end of the upright is the bottom, attach a

plastic foot (Ref. No. 5 or 6) to the bottom of each upright by

pressing it into place. Note the differences at right between a foot

for an “L” upright and a foot for a “T” upright.

4. Lean one “L” upright against

a wall, and temporarily place

one shelf support (Ref. No. 3)

at approximately eye

level to properly space the

uprights. Make sure both

rivets on the shelf support are

fully inserted into the keyhole

slots, and are rmly seated

at the bottom of the keyhole

as shown in step 5.

5. To rmly seat shelf supports and backstops, make sure both

rivets are fully inserted in the keyhole slots, and rmly seated in

the bottom of the slot. A rubber mallet can be helpful in

accomplishing this.

6. Hold a second “L” upright

(or a “T” upright if you

are assembling multiple

units) approximately 36”

away. Pull the rst

upright away from the

wall using the shelf support

you attached in step 4, and

insert the other end of the

shelf support into the

second upright.

NOTE: Take care not to

let the uprights fall,

as they are not

stable until step 7

is completed.

7. Place a shelf support at the rear of the unit in the bottom keyhole

slots, in the same way you placed the shelf support in steps 4

through 6. Then, place a second shelf support at bottom front of

unit.

Open “L” Upright Open “T” Upright

Down

“L” Upright “T” Upright

⁭

Properly Seated Not Seated

8. Place a shelf (Ref. No. 4) on

the unit by inserting it so it

nests into the shelf supports.

A properly placed shelf will

t ush with the shelf

supports as shown below.

11. If you are assembling only a single unit, assembly is now complete

(shown below left). If you are assembling multiple units joined

together, your starter unit should have been assembled with a “T”

upright (shown below right), as described in step 1. Continue with

step 12.

12. Repeat steps 6 through 10, adding the shelf supports to the “T”

upright already in place on the unit and nishing with an “L”

upright to complete the add-on unit..

9. Continue the assembly by

placing supports and

shelves as described in

steps 7 and 8. The

recommended spacing

between the shelves is

fteen inches, (eight open

keyhole slots between the

supports).

10. The top shelf supports and top shelf should be installed ush with

the upright top.

⁭

Completed Single Unit Completed Unit Ready for Add-on

⁭

REPLACEMENT PARTS

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.

DESCRIPTION

36W x 24D x 76H

PART NO.

5 Openings

QUANTITY

49B238

Starter Add-On

RGL-1236S RGL-1236A

Open “L” Upright OR

Open “L” Upright

Closed “T” Upright OR

Closed “T” Upright

Shelf Support

Shelf OR

Shelf

Plastic “L” Foot

Plastic “T” Foot

1276LO

1576LO

1876LO

1276TO

1576TO

1876TO

HS-3614

PBLS-3612

PBLS-3615

PBLS-3618

LTNF-L

LTNF-T

Plain Shelf

(Ref No. 4)

Shelf Support

(Ref No. 3)

⁭

Plastic Foot

for “L” Upright

(Ref No. 5) Plastic Foot

for “T” Upright

(Ref No. 6)

⁭

Open “T”

Upright

(Ref No. 2)

Open “L”

Upright

(Ref No. 1)

REF.

NO.

36W x 18D x 76H

5 Openings

QUANTITY

Starter Add-On

RGL-1836S RGL-1836A

36W x 18D x 76H

5 Openings

QUANTITY

Starter Add-On

RGL-1536S RGL-1536A

Optional Sliding Divider Kit (RSKD-12) is available for purchase from your previous purchase location.

⁭

Dieses Handbuch passt für folgende Modelle

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco zt7 Series Bedienungsanleitung

Tennsco

Tennsco ZL7 Series Bedienungsanleitung

Tennsco

Tennsco 1872 Bedienungsanleitung

Tennsco

Tennsco ZA7-4824S-4D Bedienungsanleitung

Tennsco

Tennsco DWR-4218 Bedienungsanleitung

Tennsco

Tennsco Stackable Workbench Drawer Unit Bedienungsanleitung

Tennsco

Tennsco 3018 Bedienungsanleitung

Tennsco

Tennsco 3070 Bedienungsanleitung

Tennsco

Tennsco 1870RH Bedienungsanleitung

Tennsco

Tennsco Sliding Door Jumbo Storage Cabinet JSD2478SU Bedienungsanleitung

Tennsco

Tennsco Z Series Bedienungsanleitung

Tennsco

Tennsco APT-3672S Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco Q Series Bedienungsanleitung

Tennsco

Tennsco Z-Line Steel Shelf Unit Bedienungsanleitung

Tennsco

Tennsco Jumbo Storage Cabinet J1878SU Bedienungsanleitung

Tennsco

Tennsco 1870 Bedienungsanleitung

Tennsco

Tennsco WELDED 3-PERSON LOCKER Bedienungsanleitung

Tennsco

Tennsco B-8400 Bedienungsanleitung

Tennsco

Tennsco Jumbo Storage Cabinet J2478SU Bedienungsanleitung

Tennsco

Tennsco Z-Line Bedienungsanleitung

Tennsco

Tennsco B-8400 Bedienungsanleitung

Tennsco

Tennsco 1420 Bedienungsanleitung

Tennsco

Tennsco EB-12 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung