Tennsco 1442 Bedienungsanleitung

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1470712

Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000

TENNSCO STORAGE CABINET

Model 1442

PK-1470712

LIMITED WARRANTY

Tennscowarrantsgoodspurchasedhereundertobefreeofdefectsinmaterialsandworkmanshipforaperiodofone(1)yearfromthedateofshipment,hereunder.

This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by

persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.

UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS

AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR

OTHERWISE.

NOGOODSACCEPTEDFORRETURNWITHOUTPRIORAPPROVAL. SellershallhavetherighttoinspectanygoodsclaimedtobedefectiveatBuyersplace

of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne

by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

(615) 446-8000 or (866) 446-8686 (toll free)

Website: www.tennsco.com E-mail: [email protected]

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

Congratulations on your purchase of a

Tennsco Storage Cabinet! Tennsco's 1442 units

are general purpose desk high storage cabinets

that provide a level of quality you won’t find

elsewhere. They provide secure storage for office

supplies, books, records, small parts, tools, etc.

The 1442 offers three openings with two

adjustable sheves, a locking chrome handle with

two keys, and a three-point locking system

for extra security.

Tennsco’s cabinets are constructed from

top quality 20 to 24 gauge steel, with 20 gauge

steel shelves offering weight capacities of 150

lbs. per shelf (evenly distributed). Our attractive

and durable powder-coated paint finish will

provide for years of service.

GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various

pieces to avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance on your cabinet.

7. Place rear flange of the bottom (Ref. No. 6) into

the bottom lances of the back. The flange with

two holes should face

the front, hanging

over the sill. Insert

bolts through the

bottom and sill with

the head facing

the front of the unit.

Secure with two nuts.

4. Attach the top (Ref. No. 7) to the unit by sliding

the outer flange over the back of the unit and the

side flange to the side panel

on the unit. The threaded

studs should go

through the

holes in

the top

flange of

the side

and fasten

with three nuts.

Attach the back to

the top using four

bolts and nuts.

3. Attach the left side (Ref. No. 2) to the back by

placing flange (A) around the back and bolting

the back and

side together

with

four bolts

and nuts

(Ref.

Nos. 17

& 18).

Be sure

that

the

lances on

all

shelf adjustment

strips (B) point in the same direction.

6. Attach the sill (Ref. No. 5) to the

sides.

Place nut

loosely on each of the studs and slide the ends of

the sill into the slots on both sides of the unit.

Then,

securely

tighten

the

nuts.

Tools Needed: A free 11/32" nut driver is provided with each Tennsco cabinet (Ref. No. 16).

In addition, you will need a flathead screwdriver. A hammer is required to install the hinge pin.

Two people recommended for assembly. Approximate assembly time: 15 to 25 minutes.

INSTALLATION OF 1442 CABINET

1. The reference numbers used throughout this

sheet refer to the illustration on the back cover.

This is to help you to identify the various parts

as they are mentioned.

2. Place the cabinet back (Ref. No. 1) on a

protected surface to prevent

scratching the paint. The

flange on the

bottom of

the back

should be facing

upward.

Flange faces upward

Insert shelf into

bottom lances.

NOTE: When bolting the unit together, leave the bolts

slightly loose until Step 8, unless otherwise specified.

5. Attach the right side (Ref. No. 3) to the back in

the same manner as you did in step 3, again

making sure that the flange is around the back

and that the lances on the shelf adjustment strips

are pointed in the

same direction as those on

the

back and left side. Push the side panel up so the

studs in the top go through the holes in the top

flange of side and fasten with

three nuts.

Nuts placed loosely

on studs of the sill.

Slide ends in to the slots on

the bottom of the sides.

Two holes must

be in front

Flange goes

under back

All lances point

UP on both back

and side.

8. Set the unit upright and tighten all nuts and bolts

around the entire unit.

10. Attach the

left door

(Ref. No. 8) to the unit by

placing the door on the hinges,

aligning the hinge

holes, dropping the pins into the slots,

then

placing the flat end of a screwdriver

on the hinge

pins (Ref. No. 15)

and tapping them in with a

hammer.

9. Insert the shelves

(Ref. No. 4) at your

desired levels.

NOTE: In order to place the

shelves, you must first tilt

the shelf slightly to the left

or right before inserting

into the unit.

11. Attach the right door (Ref. No. 9) to the unit in

the same way you attached the left door.

3. With the handle still in the open

position, hook the locking bars (Ref. No.

10) to the locking cam (see "A"at left).

Once in position, slowly rotate the door

handle to the closed position so the

lock bars protrude from the holes at the

top and bottom of the door (shown

at right, below)

Handle/Locking System Installation

1. Place the locking

handle (Ref. No. 11)

on the right hand

door and fasten with

two #8-32 X 1/4

slotted hex-head

bolts and

lockwashers (Ref.

No. 17).

4. Slide the nylon lock bar

guide inserts (Ref. No.

14) over the lock bar

ends and through the

door slots (see "B" at

right) Push firmly until the

guides snap into place. If

necessary, turn the

handle back to the open

position and gently tap

with a hammer until the

guides slide into place.

2. Turn the handle to the open position, and

place the locking cam (Ref. No. 12)

over the square

shank of the door

handle. The latch must

be facing downward as shown.

Then place the locking cotter

pin (Ref. No. 13) through the

hole of the square shank.

































TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:

Model Number (1442) Purchase Date

Description of part(s) needed and part Your company name

number(s) as shown in Parts List (above) Contact person's name

Color (i.e. Medium Grey, etc.) Who the product was purchased from

Was item missing, or was it damaged?

Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Customer Service: (866) 446-8686 Fax: (866) 445-7260

If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.

REF. NO. PART NO.

DESCRIPTION QTY.

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However,

should your unit contain missing or damaged parts, replacements may be obtained directly from Tennsco. To obtain

proper replacement parts, follow the instructions below: (or fill out the form at www.tennsco.com/replacement.cfm)

1 Back panel 1 978BAS

2 Left side 1 978LSS

3 Right side 1 978RSS

4 Shelf 2 301

5 Sill 1 944SS

6 Bottom 1 944BO

7 Top 1 978CTS

8 Left door 1 086LD

9 Right door 1 086RD

10 Locking bar set 1 086LB

11 Locking handle w/keys & hardware 1 944LH

12 Locking cam* 1 944LC

13 Cotter Pin* 1 CTRPN

14 Locking bar guide insert (nylon)* 2 944GI

15 Hinge pin* 6 944HP

16 Tennsco nut driver* 1 TOOL-2

17 #8-32 x 3/8"bolts* 14 AVAILABLE LOCALLY

18 #8-32 nuts* 24 AVAILABLE LOCALLY

*Included in Ref. No. 11, (locking handle with keys and hardware, Part No. 944LH).

REPLACEMENT PARTS

Cotter Pin

(Ref. No. 13)

Right

Side

(Ref.

No. 3)

Sill

(Ref. No. 5)

Back Panel

(Ref. No. 1)

Locking Cam

(Ref. No. 12)

Locking Handle

with Keys

(Ref. No. 11)

Shelf

(Ref. No. 4)

Bottom

(Ref. No. 6)

Left Side

(Ref.

No. 2) Top

(Ref. No. 7)

Left Door

(Ref. No. 8)

Right

Door

(Ref.

No. 9)

Locking Bar Guide

Nylon Insert

(Ref. No. 14)

Locking Bar Set

(Ref. No. 10)

Tennsco Nut Driver

(Ref. No. 16)

Hinge Pin

(Ref. No. 15)

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco 1870 Bedienungsanleitung

Tennsco

Tennsco B-8400 Bedienungsanleitung

Tennsco

Tennsco 7224 Bedienungsanleitung

Tennsco

Tennsco Stackable Workbench Drawer Unit Bedienungsanleitung

Tennsco

Tennsco EB-12 Bedienungsanleitung

Tennsco

Tennsco DWR-4218 Bedienungsanleitung

Tennsco

Tennsco LSS-361872 Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet 7220 Bedienungsanleitung

Tennsco

Tennsco ESPC-1236 Bedienungsanleitung

Tennsco

Tennsco SRS-601878 Series Bedienungsanleitung

Tennsco

Tennsco ESP-1236 Bedienungsanleitung

Tennsco

Tennsco B-8400 Bedienungsanleitung

Tennsco

Tennsco 1-Wide Welded Base for Lockers without Legs Bedienungsanleitung

Tennsco

Tennsco DWR-6618 Bedienungsanleitung

Tennsco

Tennsco J1842A-N Bedienungsanleitung

Tennsco

Tennsco BK6-121512-3 Bedienungsanleitung

Tennsco

Tennsco FB-12 Bedienungsanleitung

Tennsco

Tennsco Jumbo Storage Cabinet J1878SU Bedienungsanleitung

Tennsco

Tennsco SINGLE TIER Bedienungsanleitung

Tennsco

Tennsco APT-3672S Bedienungsanleitung

Tennsco

Tennsco J2478C Bedienungsanleitung

Tennsco

Tennsco WELDED 3-PERSON LOCKER Bedienungsanleitung

Tennsco

Tennsco JUMBO Gebrauchsanweisung

Tennsco

Tennsco MB-1-2542-MGY Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung