Texas Instruments Chipcon CC2420DK Programmierhandbuch

SWRU044 Page 1 of 2

Quick Start Instructions

CC2420DK Development Kit

Introduction

The CC2420 single-chip RF transceiver provides a highly integrated, flexible low-cost solution

for applications using the worldwide unlicensed 2.4 GHz frequency band. The CC2420DK

development kit is a powerful and flexible tool specifically designed to make it fast and easy

for the user to evaluate the RF performance of the CC2420.

The Development Kit includes two CC2400EB Evaluation Boards and two CC2420EM

Evaluation Modules. The CC2420EM contains the CC2420 chip and required external

components. The CC2420EM can also be used for prototyping together with a

microcontroller.

The CC2400EB serves as a motherboard for the CC2420EM Evaluation Module. The

CC2400EB provides a USB port, buttons, LEDs, voltage regulation, configuration jumpers

and connectors to make it easy to interface the CC2420 with SmartRF®Studio and various

test equipment.

The hardware is documented in the CC2420DK User Manual, while SmartRF®Studio is

documented in its own User Manual. All documentation and software should be downloaded

from Chipcon’s web site. Please visit Chipcon’s web site regularly for updates to the

documentation and software.

Getting started

1. Plug a CC2420EM into a CC2400EB. Connect the CC2400EB to an external power

supply. When shipped, the CC2400EB is configured for use with a 4-7 V power

supply. If you need to change the voltage settings, please see the CC2420DK User

Manual for further details.

2. If you are going to measure the current consumption of the CC2420, insert an

amperemeter between the appropriate terminals of the power connector. If not, make

sure that a jumper is inserted between these terminals.

3. Install version 5.1 or later of SmartRF®Studio on a PC if this is not already done.

Follow the instructions given by the installation program. The PC must be running

Windows 98 or newer (the CC2420DK will not work with Windows 95 or Windows NT

due to lack of USB support).

4. Use the supplied USB cable to connect the CC2400EB to the PC.

5. Start SmartRF®Studio.

6. You can now test the RF performance of the CC2420 chip. It is also possible to set

up a link between two PCs. Please turn to the SmartRF®Studio User Manual for

more information.

SWRU044 Page 3 of 2

Figure 1: CC2420EM Evaluation Module

Figure 2: CC2400EB Evaluation Board

USB port

Serial port

Power

terminal

blocks

DC jack

power input

SMA

connectors

Buttons

LEDs

Test port 2

Test port 1

Jum

ers

SMA Antenna

connector

16 MHz

crystal

CC2420

Jumper to select

Internal/external

voltage regulator

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,

enhancements, improvements, and other changes to its products and services at any time and to discontinue

any product or service without notice. Customers should obtain the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to TI’s terms

and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI

deems necessary to support this warranty. Except where mandated by government requirements, testing of all

parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for

their products and applications using TI components. To minimize the risks associated with customer products

and applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,

in which TI products or services are used. Information published by TI regarding third-party products or services

does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.

Use of such information may require a license from a third party under the patents or other intellectual property

of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without

alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for

such altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that

product or service voids all express and any implied warranties for the associated TI product or service and

is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Following are URLs where you can obtain information on other Texas Instruments products and application

solutions:

Products Applications

Amplifiers amplifier.ti.com Audio www.ti.com/audio

Data Converters dataconverter.ti.com Automotive www.ti.com/automotive

DSP dsp.ti.com Broadband www.ti.com/broadband

Interface interface.ti.com Digital Control www.ti.com/digitalcontrol

Logic logic.ti.com Military www.ti.com/military

Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork

Microcontrollers microcontroller.ti.com Security www.ti.com/security

Telephony www.ti.com/telephony

Video & Imaging www.ti.com/video

Wireless www.ti.com/wireless

Mailing Address: Texas Instruments

Post Office Box 655303 Dallas, Texas 75265

Andere Handbücher für Chipcon CC2420DK

Andere Texas Instruments Mikrocontroller Handbücher

Texas Instruments

Texas Instruments Errata MSP430F6779 Bedienungsanleitung

Texas Instruments

Texas Instruments eZ430-Chronos Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430G2955 Bedienungsanleitung

Texas Instruments

Texas Instruments LaunchPad CC2650 Bedienungsanleitung

Texas Instruments

Texas Instruments F280025C Bedienungsanleitung

Texas Instruments

Texas Instruments TLC2543 Bedienungsanleitung

Texas Instruments

Texas Instruments DLP Discovery 4100 Bedienungsanleitung

Texas Instruments

Texas Instruments MSPM0G150 Series Bedienungsanleitung

Texas Instruments

Texas Instruments SimpleLink MSP432P4111 Bedienungsanleitung

Texas Instruments

Texas Instruments MSPM0G350 Series Bedienungsanleitung

Texas Instruments

Texas Instruments LaunchPad CC1354P10-6 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS65910 EVM Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F663x Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F6769 Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F67621 Bedienungsanleitung

Texas Instruments

Texas Instruments Concerto F28M35 Series Produkthandbuch

Texas Instruments

Texas Instruments DRV2605L Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F663x Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F6747 Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F67691 Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F6723 Bedienungsanleitung

Texas Instruments

Texas Instruments SimpleLink CC2650 Bedienungsanleitung

Texas Instruments

Texas Instruments AFE722 Series Bedienungsanleitung

Texas Instruments

Texas Instruments MSP430F22x4 Series Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Bedienungsanleitung

Mikroe

Mikroe click Proximity 2 Bedienungsanleitung