Texecom Premier 412 Bedienungsanleitung

Premier 412 & 816 User Guide (UK)

USER GUIDE (UK)

Security Control Panels

THANK YOU FOR VOTING TEXECOM

THANK YOU FOR VOTING TEXECOMTHANK YOU FOR VOTING TEXECOM

THANK YOU FOR VOTING TEXECOM

Premier 412 & 816 User Guide (UK)

2INS197

Operating Your Alarm System

This document covers the everyday operation of your alarm system, for details on

more advanced operation and system programming, please refer to the Premier

412 & 816 Master User Manual.

Away Arming the System

Enter your Access code !!!! followed by the "/#key. The Armed

light will flash and the exit sounder will sound for the duration of the exit time.

Part Arming the System

Enter your Access code !!!! followed by the $key. The system will

normally arm immediately, the Armed light will flash slowly indicating that the

system is Part armed.

Disarming During Entry

Enter the premises via the designated entry point. The entry tone will sound,

proceed directly to the remote keypad and enter your Access code

!!!!.

Disarming When Not in Entry

Proceed directly to the remote keypad and enter your Access code

!!!! followed by the %/&key. Note: If your system consists of

only one partition you will not have to press the %/&key.

Omitting Zones

Enter your Access code !!!! followed by the 'key. Enter the zone

or zones to be omitted e.g. 02, 04 etc. When all required zones have been

selected, press:

"/#to Away arm the system with the selected zones omitted

$to Stay arm the system with the selected zones omitted

(to return to the normal disarmed state with the selected zones omitted

Reset Alarms/Faults

Enter your Access code !!!!, then enter () or press *.

Last Alarm Log

Enter your Access code !!!!, and then enter (+. The remote

keypad will display the zones that caused an alarm when the system was last

armed. Press (to return to the normal disarmed state.

Premier 412 & 816 User Guide (UK)

INS197 3

Acknowledging a New Service Fault

Should the Service light start flashing, enter your Access code !!!!,

and then enter (,. The remote keypad will display all Service Faults (see

Service Faults Table on back page). Press (or *-to acknowledge the fault

and return to the normal disarmed state.

Toggle Chime On and Off

Enter your Access code !!!!, and then enter (. or /.

Change User Access Code

Enter your existing Access code !!!!, and then enter (0. Enter

your new Access code !!!! followed by the "/#key. Now re-

enter your new Access code !!!! for confirmation.

Abort Communications

Enter your Access code !!!!, and then enter (1.

Resetting the System Using Anti-code Reset

This feature is normally used in the UK where users are not permitted to reset the

panel following a communicated alarm. However, you can reset the panel after

entering a unique anti-code remote reset number, which is obtained from your

installer or Alarm Receiving Centre.

Enter your Access code !!!!, and then enter (2. The remote

keypad will display a randomly generated 4-digit code. Make a note of the

number displayed and contact the number below:

Tel No: ______________________________________

You will be asked to explain the circumstances of the alarm and if the Alarm

Receiving Centre or Installer decides that it is not necessary to send an engineer,

you will be provided with a 4-digit “Anti-code”.

Enter the anti-code reset number !!!!-at the keypad. If the code is

accepted the keypad will sound an acceptance tone and the system will reset and

return to the normal disarmed state.

Service Faults Displayed on LED Keypads

Light Fault Condition

1 AC Fail

2 Telephone Line Fault

3 2-Wire Smoke Alarm

Box Tamper & Auxiliary Input:

Press .to view type, Lights 1 - 3 will light up:

Light 1 = Box Tamper

Light 2 = Auxiliary Tamper

Light 3 = Auxiliary PA

5 Date or Time Lost

6 Zone Tamper/Trouble

Press 3to view zone number

7 Keypad Tamper/Removed

Press 1to view keypad number

Equipment Faults

Press 4to view fault type:

Light 1 = Output 1 Fault

Light 2 = Output 2 Fault

Light 3 = Siren/Bell Fault

Light 4 = 2-Wire Smoke Sensor Fault

Light 5 = Auxiliary Fuse Failed

Light 6 = Battery Fault

Light 7 = Service Timer/Zone Soak Test Failed

Light 8 = Communication Fault

INS197

Andere Handbücher für Premier 412

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Texecom Bedienfeld Handbücher

Texecom

Texecom Premier 24 Bedienungsanleitung

Texecom

Texecom PREMIER 48 Bedienungsanleitung

Texecom

Texecom Premier 8SP Bedienungsanleitung

Texecom

Texecom Premier Elite 48-W Bedienungsanleitung

Texecom

Texecom Premier Elite Micro Contact-W Bedienungsanleitung

Texecom

Texecom Premier 24 Gebrauchsanweisung

Texecom

Texecom PREMIER 48 Bedienungsanleitung

Texecom

Texecom Veritas R8Plus Bedienungsanleitung

Texecom

Texecom Premier Elite 48-W Bedienungsanleitung

Texecom

Texecom Veritas Excel Master Bedienungsanleitung

Texecom

Texecom Premier 24 Montage- und Bedienungsanleitung

Texecom

Texecom Premier 412 Bedienungsanleitung

Texecom

Texecom Veritas 8 Bedienungsanleitung

Texecom

Texecom Veritas 8 Bedienungsanleitung

Texecom

Texecom Veritas 8 Bedienungsanleitung

Texecom

Texecom Premier Elite ComIP Bedienungsanleitung

Texecom

Texecom Premier Elite Series Bedienungsanleitung

Texecom

Texecom Veritas R8 Plus Bedienungsanleitung

Texecom

Texecom Veritas R8 Plus Bedienungsanleitung

Texecom

Texecom Premier 24 Bedienungsanleitung

Texecom

Texecom Premier 412 Bedienungsanleitung

Texecom

Texecom Premier 24 Bedienungsanleitung

Texecom

Texecom Premier 8168 Bedienungsanleitung

Texecom

Texecom Premier 888 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten