Textron Ransomes Jacobsen Super Certes 51 Leitfaden

Safety, Operation and Maintenance Manual

Sicherheits-, Betriebs- und Wartungshandbuch

Super Certes 51 & 61, Super Bowl 51 &

Marquis 51 & 61

RJ 100 /05 2006

WARNING: If incorrectly used this machine can cause severe

injury. Those who use and maintain this machine should be

trained in its proper use, warned of its dangers and should

read the entire manual before attempting to set up, operate,

adjust or service the machine.

24791G-DE (rev.0)

Super Certes 51: Series: EC2 Product codes: LDFC510 Engine type: Honda GX120-Q4

Super Certes 61: Series: ED2 Product codes: LDFC610 Engine type: Honda GX120-Q4

Super Bowl 51: Series: EE2 Product codes: LDFD510 Engine type: Honda GX120-Q4

Marquis 51: Series: EF2 Product codes: LDAA510 Engine type: Honda GX120-Q4

Marquis 61: Series: EG2 Product codes: LDCB610 Engine type: Honda GX120-Q4

Super Certes 51: Serie: EC2 Produktcode: LDFC510 Motor: Honda GX120-Q4

Super Certes 61: Serie: ED2 Produktcode: LDFC610 Motor: Honda GX120-Q4

Super Bowl 51: Serie: EE2 Produktcode: LDFD510 Motor: Honda GX120-Q4

Marquis 51: Serie: EF2 Produktcode: LDAA510 Motor: Honda GX120-Q4

Marquis 61: Serie: EG2 Produktcode: LDCB610 Motor: Honda GX120-Q4

English

ACHTUNG: Wenn diese Maschine nicht ordnungsgemäß

verwendet wird, können ernsthafte Verletzungen verursacht

werden. Personen, die diese Maschine verwenden und warten,

müssen in ihrer richtigen Verwendung ausgebildet sein, auf die

Gefahren aufmerksam gemacht worden sein und die Anleitung

ganz gelesen haben, bevor sie versuchen, die Maschine

aufzustellen, zu bedienen, einzustellen oder zu warten.

YEARS OF MOWING

EXCELLENCE

GB-1

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

1 CONTENTS

2 INTRODUCTION

2.1 IMPORTANT ..........................................................2

2.2 PRODUCTIDENTIFICATION ...................................2

2.3 SPARESSTOCKINGGUIDE ...................................3

2.4 GUIDELINESFORTHEDISPOSAL..........................4

3 SAFETYINSTRUCTIONS

3.1 OPERATINGINSTRUCTIONS ..................................5

3.2 SAFETYSIGNS ....................................................5

3.3 STARTINGTHEENGINE .........................................5

3.4 DRIVINGTHEMACHINE .........................................5

3.5 TRANSPORTING ...................................................5

3.6 LEAVINGTHEDRIVINGPOSITION .........................5

3.7 SLOPES ...............................................................5

3.8 BLOCKEDCUTTINGCYLINDERS ...........................6

3.9 ADJUSTMENTS,LUBRICATIONAND

MAINTENANCE .....................................................6

4 SPECIFICATIONS

4.1 ENGINESPECIFICATION ........................................8

4.2 MACHINESPECIFICATION .....................................8

4.3 DIMENSIONS .........................................................9

4.4 RECOMMENDEDLUBRICANTS ..............................9

4.5 VIBRATIONLEVEL...............................................10

4.6 CONFORMITYCERTIFICATES ............................... 11

5 DECALS

5.1 SAFETYDECALS ................................................21

5.2 INSTRUCTIONDECALS ........................................21

6 CONTROLS .........................................................22

6.1 OPERATORPRESENCECONTROL(OPC) .............22

6.2 LANDROLLCLUTCH ............................................22

6.3 THROTTLECONTROL ..........................................22

6.4 BRAKERELEASELEVER .....................................23

6.5 CYLINDERCLUTCHLEVER ..................................23

6.6 IGNITIONCUT-OUTSWITCH .................................23

7 OPERATION

7.1 DAILYINSPECTION .............................................24

7.2 OPERATORPRESENCEANDSAFETYINTERLOCK

SYSTEM.............................................................25

7.3 OPERATINGPROCEDURE ....................................26

7.4 OPERATIONOFTHEMACHINE .............................27

CONTENTS PAGE

8 MAINTENANCE

MAINTENANCECHART ........................................28

MAINTENANCEDIAGRAM ....................................29

8.1 ENGINEDAILY(EVERY8WORKINGHOURS) ......30

8.2 ENGINEWEEKLY:(EVERY50WORKINGHOURS). 30

8.3 CLUTCHANDLAYSHAFTCOVER........................31

9 LUBRICATION ......................................................32

9.1 ENGINEDAILY:(EVERY8WORKINGHOURS). .....32

9.2 ENGINE:(AFTERFIRST20 HOURS). ...................32

9.3 ENGINEWEEKLY:(EVERY50WORKING HOURS).32

9.4 MACHINE .............................................................33

10 ADJUSTMENTS

10.1 51MARQUIS:HEIGHTOFCUTADJUSTMENT ......34

10.2 61MARQUIS:HEIGHTOFCUTADJUSTMENT .......34

10.3 MARQUIS:ALIGNINGTHEFRONTROLLS ............35

10.4 SUPERCERTES/SUPERBOWL:HEIGHT

OFCUTADJUSTMENT .........................................35

10.5 CYLINDERTOBOTTOMBLADEADJUSTMENT .....36

10.6 CYLINDERCLUTCHADJUSTMENT .......................36

10.7 CONCAVEADJUSTMENT .....................................37

10.8 LANDROLLSCRAPER .........................................38

10.9 LANDROLLCLUTCHADJUSTMENT ......................38

10.10 BELTADJUSTMENTS ...........................................39

10.11 BACKLAPPINGTHECUTTINGUNIT ......................40

10.12 HANDLEADJUSTMENT ........................................41

10.13 MARQUIS:SIDEROLLS .......................................41

10.14 MAINCLUTCHADJUSTMENT ...............................42

10.15 PARKINGBRAKEADJUSTMENT ...........................42

11 ACCESSORIES ....................................................43

11.1 BRUSHANDCOMBSET .......................................43

11.2 TRANSPORTWHEELS(SUPERCERTESONLY)....43

11.3 TRAILINGSEAT ...................................................43

11.4 VERTI-GROOMATTACHMENT ..............................44

11.5 VERTI-GROOM DRIVE BELT ...............................44

11.6 VERTI-GROOMLUBRICATION. .............................45

12 GUARANTEE/SALES&SERVICE .......................46

CONTENTS PAGE

GB-2

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

2 INTRODUCTION

2.2PRODUCTIDENTIFICATION

2.1IMPORTANT

IMPORTANT: This is a precision machine and the service obtained from it depends on the way it is operated and

maintained.

This SAFETY AND OPERATORS MANUAL should be regarded as part of the machine. Suppliers of both new and

second-hand machines are advised to retain documentary evidence that this manual was provided with the

machine.

This machine is designed solely for use in customary grass cutting operations. Use in any other way is

considered as contrary to the intended use. Compliance with and strict adherence to the conditions of operation,

service and repair as specified by the manufacturer, also constitute essential elements of the intended use.

Before attempting to operate this machine, ALL operators MUST read through this manual and make themselves

thoroughly conversant with Safety Instructions, controls, lubrication and maintenance.

Accident prevention regulations, all other generally recognized regulations on safety and occupational medicine,

and all road traffic regulations shall be observed at all times.

Any arbitrary modifications carried out on this machine may relieve the manufacturer of liability for any resulting

damage or injury.

A MachineName

B SerialNumber

C YearofManufacture

D MachineWeight

E EnginePower

GB-3

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

2.3 Spares Stocking Guide

To keep your equipment fully operational and productive, Ransomes suggests you maintain a stock of the

more commonly used maintenance items. We have included part numbers for the additional support

materials and training aids.

straPecivreSlairetaMtroppuSecivreS

rebmuNtraPnoitpircseDrebmuNtraPnoitpircseD

000-1EZ-55961retliFleuF7E07HZ31 straPenignE

launaM

228-0EZ-02271renaelCriA0000FZ23 srenwOenignE

kbdnaH

14W-7HZ-00163hctiwSnitingIZ007HZ66 phSkrWenignE

launaM

Use of other than original or authorised Textron Turf Care & Specialty Products, Parts & Accessories will void

thewarranty.

2 INTRODUCTION

GB-4

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

2.4 GUIDELINESFORTHEDISPOSAL

OFSCRAPPRODUCTS

When it has been identified that a turf care

product has no further functional value and

requires disposal, the following actions should

betaken.

These guidelines should be used in

conjunction with applicable Health, Safety and

Environmental legislation and use of approved

local facilities for waste disposal and recycling.

• Position the machine in a suitable

location for any necessary lifting

equipment to be used.

• Use appropriate tools and Personal

Protective Equipment (PPE) and take

guidance from the technical manuals

applicable to the machine.

• Remove and store appropriately:

1. Batteries

2. Fuel residue

3. Engine coolant

4. Oils

• Disassemble the structure of the

machine referring to the technical

manuals where appropriate. Special

attention should be made for dealing

with ‘stored energy’ within

pressurised elements of the machine

or tensioned springs.

• Any items that still have a useful

service life as second hand

components or can be re-serviced

should be separated and returned to

the relevant centre.

• Other worn out items should be

separated into material groups for

recycling and disposal consistent with

available facilities. More common

separation types are as follows:

• Steel

• Non ferrous metals

• Aluminium

• Brass

• Copper

• Plastics

• Identifiable

• Recyclable

• Non recyclable

• Notidentified

• Rubber

• Electrical & Electronic

Components

• Items that cannot be separated

economically into different material

groups should be added to the

‘General waste’ area.

• Do not incinerate waste.

Finally update machinery records to indicate

that the machine has been taken out of service

and scrapped.

GB-5

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

This safety symbol indicates important safety

messages in this manual. When you see this

symbol, be alert to the possibility of injury, carefully

readthemessagethatfollows, andinformother

operators.

3.1 OPERATINGINSTRUCTIONS

• Ensure that the instructions in this book

arereadandfullyunderstood.

• Nopersonshouldbeallowedtooperate

this machine unless they are fully

acquainted with all the controls and the

safetyprocedures.

• Neverallowchildrenorpeopleunfamiliar

with these instructions to use this

machine. Local regulations may restrict

theageoftheoperator.

3.2 SAFETYSIGNS

• It is essential all safety labels are kept

legible, if they are missing or illegible they

must be replaced. If any part of the

machine is replaced and it originally

carried a safety label, a new label must be

affixedto thereplacementpart. New

safetylabelsareobtainablefrom

Ransomesdealers.

3.3 STARTINGTHEENGINE

• Before starting the engine check that the

brakesareapplied,drivesareinneutral,

guards are in position and intact, and

bystandersareclear ofthe machine.

• Do not run the engine in a building without

adequateventilation.

3.4 DRIVINGTHEMACHINE

• Beforemoving themachine,checkto

ensure that all parts are in good working

order,payingparticularattentionto

brakes, tyres, steering and the security of

cuttingblades.

• Replace faulty silencers, mow only in

daylightorgood artificiallight

• AlwaysobservetheHighwayCodebothon

andoff theroads. Keepalert andawareat

all times. Watch out for traffic when

crossingornearroadways.

3 SAFETY INSTRUCTIONS

• Stoptheblades rotatingbeforecrossing

surfacesother thangrass.

• Rememberthatsomepeoplearedeafor

blind and that children and animals can be

unpredictable.

• Keeptravellingspeedslowenoughforan

emergencystop tobeeffectiveandsafeat

all times, in any conditions.

• Removeoravoidobstructionsinthearea

to be cut, thus reducing the possibility of

injuryto yourselfand/orbystanders.

• Keep in mind that the operator or user is

responsibleforaccidentsorhazards

occurringtootherpeople ortheirproperty.

• Whilemowing, alwayswear substantial

footwearand longtrousers. Do not

operatetheequipmentwhenbarefootor

wearingopensandals.

• Checkthe grasscatcherfrequently for

wearordeterioration. After strikinga

foreignobject. Inspectthelawnmowerfor

damageandmakerepairsbeforerestarting

andoperatingtheequipment.

• Ifthe machinestartstovibrateabnormally,

check immediately.

3.5 TRANSPORTING

• Do not transport with cutting mechanism

rotating.

• Drivethemachinewithdueconsideration

ofroad andsurfaceconditions, inclines

andlocalundulations.

3.6 LEAVINGTHEDRIVINGPOSITION

• Parkthemachineonlevelground.

• Beforeleavingthedrivingposition,stopthe

engineandmake sureallmoving partsare

stationary. Apply brakes and disengage all

drives.Switchengineoff.

3.7 SLOPES

TAKEEXTRACAREWHENWORKINGON

SLOPES

• Localundulationsand sinkagewillchange

thegeneralslope.Avoidgroundconditions

which can cause the machine to slide.

• Travelongrassslopesrequiresparticular

care.

GB-6

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

3 SAFETY INSTRUCTIONS

3.8 BLOCKEDCUTTINGCYLINDERS

• Stopthe engineandmake sureall moving

partsare stationary.

• Applybrakesanddisengagealldrives.

• Release blockages with care. Keep all parts

of the body away from the cutting edge.

Bewareof energyinthe drivewhich cancause

rotationwhen theblockage isreleased.

3.9 ADJUSTMENTS,LUBRICATIONAND

MAINTENANCE

• Stopthe engineandmake sureall moving

partsare stationary.

• Applybrakesanddisengagealldrives.

• Readalltheappropriateservicinginstructions.

• Use only the replacement parts supplied by

theoriginalmanufacturer.

• When adjusting the cutting cylinders take

carenotto gethands andfeettrapped when

rotatingcylinders.

• Toreducethe firehazard,keeptheengine,

silencerandbatterycompartmentsfreeof

grass,leavesorexcessivegrease.

• Replacewornordamagedpartsforsafety.

• Whenworkingunderneathliftedpartsor

machines,make sureadequatesupportIs

provided.

• Do not dismantle the machine without

releasingorrestrainingforceswhichcan

causeparts to movesuddenly.

• Donotalterenginespeedabovemaximum

quoted in Engine Specification. Do not

changetheenginegovernorsettingsor

overspeedtheengine. Operatingtheengine

at excessive speed may increase the hazard

ofpersonalinjury.

• Whenrefuelling,STOPTHEENGINE,DO

NOTSMOKE.Addfuelbefore startingthe

engine,neveraddfuelwhiletheengineis

running.

• Usea funnelwhenpouringfuelfrom acaninto

the tank.

• Do not fill the fuel tank beyond the bottom of

the filler neck.

• Replace all fuel tank and container caps

securely.

• Storefuel incontainers specificallydesigned

forthispurpose.

• Refueloutdoors onlyanddonotsmoke while

refuelling.

• If fuel is spilled, do not attempt to start the

enginebutmovethemachineawayfromthe

areaofspillageandavoidcreatinganysource

ofignitionuntilfuelvapourshavedissipated.

• Allow the engine to cool before storing in any

enclosure.

• Neverstore theequipmentwithfuelin thetank

insidea buildingwherefumesmayreach an

openflameorspark.

• If the fuel tank has to be drained, this should

bedoneoutdoors.

• Do not spill fuel onto hot components.

• Whenservicingbatteries,DONOTSMOKE,

and keep naked lights away.

• Do not place any metal objects across the

terminals.

GB-7

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

3 SAFETY INSTRUCTIONS

DANGER-Indicatesanimminentlyhazardous

situation which, if not avoided, WILL result in death

orseriousinjury.

WARNING-Indicatesapotentiallyhazardous

situationwhich, ifnot avoided,COULD result in

deathor seriousinjury.

CAUTION-Indicatesapotentiallyhazardous

situationwhich,if notavoided, MAY result inminor

ormoderateinjury andproperty damage. It may

also be used to alert against unsafe practices.

Ear Protection Should be Worn When

Operating Machines with Operator Ear Noise

Levels above 90dB(A)Leq.

California Proposition 65

EngineExhaust,someofitsconstituents,

and certain vehicle components contain

or emit chemicals known to the state of

California to cause cancer and birth

defects or other reproductive harm

GB-8

RANSOMES SMALL PEDESTRIAN RANGE

SAFETY, OPERATORS & MAINTENANCE MANUAL

4 SPECIFICATIONS

4.1 ENGINESPECIFICATION

All 51 and 61 Machines:

TYPE: Honda 2.9kW / 3600 RPM,

single cylinder, air cooled 4

strokeOHVpetrol engine25°

inclinedcylinder,horizontal

shaft.

Model: GX120K1-QX4

MaximumSpeed: 2700±50 RPM(No load).

IdleSpeed: 1400 +200 -150 RPM

Oil Sump Capacity: 0.6 litres

Fuel: Leadfreepetrol

Fuel tank capacity:2.5 litres

4.2 MACHINESPECIFICATION

Frame

construction: PressedSteelwelded

fabrication.

Transmission: Poly Vee & Synchrunos belts

Clutches: Transmission clutch.

Separate cylinder clutch.

Separatelandrollclutch

Front roll

Super Certes/Bowl:One piece steel roll running on

ball bearings.

Marquis: Four piece wood roll.

Landroll

Super Certes: Two piece Aluminium with bevel

geardifferential.

SuperBowl: Two piece smooth cast iron with

bevel geardifferential.

Marquis: Twopiece ridgedcastiron with

bevel gear differential.

Cuttingcylinder

SuperCertes/Bowl:All welded10knife cylinder

runningonballbearings.

Marquis 51: All welded 6 knife cylinder

runningonballbearings.

Marquis 61: All welded 5 knife cylinder

runningonballbearings.

Cuttingratio

Marquis: 51cm: 85 cuts / metre

61cm: 71cuts / metre

SuperBowl: 142 cuts / metre

SuperCertes: 138cuts / metre

Heightofcut

Marquis: 6 - 27mm

SuperCertes/

SuperBowl: 3 -13mmStandard Blade

1.5- 11.5mmThinBlade

Handles: Tubularsteeladjustableat

bottom.

Grass box: Mouldedpolyethelene.

Cuttingwidth: 51cm

61cm

Cutting performance

51cm machine: 1110 sq. m./hr

61cm machine: 1660 sq. m./hr

Groundpressure 51cm: 0.28 kg./cm2

61cm: 0.32 kg./cm2

Andere Handbücher für Ransomes Jacobsen Super Certes 51

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Textron Rasenmäher Handbücher

Textron

Textron Jacobsen Super LF 1880 Fairway Mower with... Leitfaden

Textron

Textron Jacobsen HR 9016 Turbo Bedienungsanleitung

Textron

Textron Ransomes Jacobsen Super Certes 51 Leitfaden

Textron

Textron JACOBSEN G-PLEX III DN Leitfaden

Textron

Textron BUNTON BZT 2000 Series Gebrauchs- und Pflegehandbuch

Textron

Textron Jacobsen AR-5 Leitfaden

Textron

Textron Ransomes 933303H Bedienungsanleitung

Textron

Textron Jacobsen Turfcat T628D 2WD 2 RM Leitfaden

Textron

Textron Ransomes Mastiff 91 Series Leitfaden

Textron

Textron Jacobsen MP493 Leitfaden

Textron

Textron Jacobsen HR800 Bedienungsanleitung

Textron

Textron JACOBSEN JZT 1250 CUTTERDECKS Bedienungsanleitung

Textron

Textron Jacobsen LF 4675 Bedienungsanleitung

Textron

Textron Jacobsen Fairway 305 Series Leitfaden

Textron

Textron Ransomes Parkway 2250 Plus Leitfaden

Textron

Textron Ransomes LH Series Leitfaden

Textron

Textron RANSOMES FRONT-LINE 933 Technische Daten

Textron

Textron Jacobsen SLF530 Betriebsanleitung

Textron

Textron LF-128 Leitfaden

Textron

Textron GREENLEE 11147 Bedienungsanleitung

Textron

Textron RANSOMES Bedienungsanleitung

Textron

Textron JACOBSEN R-311 Leitfaden

Textron

Textron Jacobsen MH5 Leitfaden

Textron

Textron BUNTON 2180 ESTATE Series Handbuch

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung