Thermo Scientific Nicolet NIR Bedienungsanleitung

Nicolet NIR

with OMNIC Paradigm software

User Guide

269-362000 Revision A March 2023

For technical support, please contact: www.thermofisher.com

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase

to use in the product operation. This document is copyright protected and any reproduction of

the whole or any part of this document is strictly prohibited, except with the written

authorization of Thermo Fisher Scientific Inc.

The contents of this document are subject to change without notice. All technical information

in this document is for reference purposes only. System configurations and specifications in

this document supersede all previous information received by the purchaser.

Thermo Fisher Scientific Inc. makes no representations that this document is complete,

accurate or error-free and assumes no responsibility and will not be liable for any errors,

omissions, damage, or loss that might result from any use of this document, even if the

information in the document is followed properly.

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a

purchaser. This document shall in no way govern or modify any Terms and Conditions of

Sale, which Terms and Conditions of Sale shall govern all conflicting information between the

two documents.

For Research Use Only. This instrument or accessory is not a medical device and is not

intended to be used for the prevention, diagnosis, treatment, or cure of disease.

WARNING

Avoid an explosion or fire hazard.

This instrument or accessory is not designed for use in an explosive

atmosphere.

NIR Module

The optional Thermo Scientific NIR Module offers convenient, reproducible diffuse reflection

sampling with the Nicolet™ iS™50 spectrometer using the Integrating Sphere or a fiber optic

accessory.

Figure 1-1: NIR Module

AThermo Scientific NIR Module (mounts on the left side of the spectrometer)

Thermo Scientific NIR Module User Guide 3

Chapter 1

NIR Module

BFiber optic sampling area (optional)

CIntegrating Sphere sampling area

DThermo Scientific SabIR Probe

The NIR Module provides these enhanced features:

lIntegrated design

lPush button configuration

lTwo sampling options: local (Integrating Sphere) and remote (fiber optic, optional)

lUp to two dedicated detectors

lAutomated internal reference

lStandards wheel (contains 2%, 10%, 20%, 40%, and 80% glass filters and a polystyrene sample)

The optional fiber optic sampling area can be used with the Thermo Scientific SabIR diffuse reflection

probe, or with probes from other manufactures if they have SMA connectors. For information about

additional sampling modules for the Nicolet iS50 spectrometer, contact our sales representative in

your area.

NOTICE

Be sure that all persons operating this system read the site and safety manual

first.

Table of contents

NIR Module 3

Table of contents 4

4 NIR Module User Guide Thermo Scientific

Conventions used in this manual 5

Operating precautions 7

Specifications 9

Compatible software 11

Integrating Sphere sampling 13

Fiber optic sampling 27

Using the optional SabIR Probe 29

Using fiber optic accessories from other manufacturers 47

Conventions used in this manual

DANGER

Avoid hazard. Indicates a hazardous situation which, if not avoided, will

result in serious injury or death.

WARNING

Avoid hazard. Indicates a hazardous situation which, if not avoided,

could result in serious injury or death.

CAUTION

Avoid hazard. Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Thermo Scientific NIR Module User Guide 5

NIR Module

NOTICE

Follow instructions with this label to avoid damaging the system hardware or losing data.

Note Contains helpful supplementary information.

Tip Provides helpful information that can make a task easier.

6 NIR Module User Guide Thermo Scientific

Operating precautions

Read these operating precautions before using the NIR Module to avoid damaging your equipment.

Precautions for the Integrating Sphere:

lDo not pour liquids directly onto the Integrating Sphere.

lDo not use harsh detergents, chemicals, or abrasives to clean the surface of the Integrating

Sphere; these can damage the finish.

lMake sure your sample materials will not react with the sapphire crystal sampling window.

lUse solvents that do not react with sapphire crystals when cleaning the sampling window.

lAvoid scraping the sampling window with samples or sample containers.

lProtect the electrical port on the surface of the Integrating Sphere. If the connector is clogged or

jammed, contact a Thermo Scientific service representative.

Precautions for fiber optic cables:

lDo not drop the cables or knock them against a hard surface.

lDo not bend the cables or tightly coil them. The radius of the coils for the SabIR Probe should be

at least 30 cm. For other fiber optic accessories, refer to their user guides.

lAvoid twisting the cables when attaching the connectors to the ports.

lDo not over-tighten or use tools to tighten the connectors when attaching the cables to the ports.

lDo not touch the end of a fiber optic cable connector or use solvents to clean it.

lKeep a protective cap on each end of the cable when it is not in use.

Precautions for the SabIR Probe:

lDo not drop the probe or knock it against a hard surface.

lDo not subject the probe to rapid or excessive changes in temperature.

Thermo Scientific NIR Module User Guide 7

Chapter 2

lWipe off spilled chemicals immediately.

lMake sure your sample material will not react with the sapphire sampling window.

lDo not allow hard materials (glass, metal, ceramic, etc.) to contact the sampling window.

lUse solvents that do not react with sapphire crystals when cleaning the sampling window.

lPower off the instrument before connecting the SabIR Probe.

lMake sure the probe is clean before you insert it into the holster.

lDo not use the probe by itself to measure liquids. When sampling liquids, use the transflectance

adapter available for the probe.

8 NIR Module User Guide Thermo Scientific

Specifications

Feature Specification

Crystal material Sapphire

Internal reference Diffuse gold

Detector Dedicated Indium Gallium Arsenide (InGaAs)

Table 3-1: Specifications for the Integrating Sphere sampling area

Feature Specification

Fiber optic connectors SMA type

Detector InGaAs

Probe (optional) Thermo Scientific SabIR diffuse reflection probe

SabIR Probe internal reference Spectralon®

Table 3-2: Specifications for the optional fiber optic sampling area

The NIR Module spectral range is dependent upon the spectrometer configuration. The table below

shows the available configurations and their corresponding spectral ranges.

Thermo Scientific NIR Module User Guide 9

Chapter 3

Source Beamsplitter Detector Spectral range

White light CaF21InGaAs212,000 - 3,800 cm-1

White light XT-KBr3InGaAsb 11,000 - 3,800 cm-1

Table 3-3: NIR Module available spectral ranges

Note The NIR Module requires a CaF2 window installed in the external beam port on the left side

of the spectrometer.

1Calcium Fluoride

2Indium Gallium Arsenide

3Extended range Potassium Bromide

10 NIR Module User Guide Thermo Scientific

Inhaltsverzeichnis

Andere Thermo Scientific Laborausrüstung Handbücher

Thermo Scientific

Thermo Scientific Heracell Vios 160i CR Bedienungsanleitung

Thermo Scientific

Thermo Scientific ID Scribe Bedienungsanleitung

Thermo Scientific

Thermo Scientific Accela Pump Bedienungsanleitung

Thermo Scientific

Thermo Scientific AI 1310 Bedienungsanleitung

Thermo Scientific

Thermo Scientific Applied Biosystems ProFlex PCR System Bedienungsanleitung

Thermo Scientific

Thermo Scientific TSQ 8000 Evo Bedienungsanleitung

Thermo Scientific

Thermo Scientific Locator Series Bedienungsanleitung

Thermo Scientific

Thermo Scientific SUPER-NUOVA+ Bedienungsanleitung

Thermo Scientific

Thermo Scientific TSQ 8000 Bedienungsanleitung

Thermo Scientific

Thermo Scientific Dionex ICS-900 Bedienungsanleitung

Thermo Scientific

Thermo Scientific TSX Series Betriebsanleitung

Thermo Scientific

Thermo Scientific TSQ Quantum XLS Bedienungsanleitung

Thermo Scientific

Thermo Scientific Sorvall Legend Micro 21R Bedienungsanleitung

Thermo Scientific

Thermo Scientific LCQ Fleet Bedienungsanleitung

Thermo Scientific

Thermo Scientific Sorvall BIOS A Bedienungsanleitung

Thermo Scientific

Thermo Scientific SHKE8000 Series Betriebsanleitung

Thermo Scientific

Thermo Scientific ARL EQUINOX 5000 Bedienungs- und Wartungshandbuch

Thermo Scientific

Thermo Scientific F30400 Bedienungsanleitung

Thermo Scientific

Thermo Scientific 3050 Bedienungsanleitung

Thermo Scientific

Thermo Scientific ISQ Bedienungsanleitung

Thermo Scientific

Thermo Scientific Partisol 2025i Bedienungsanleitung

Thermo Scientific

Thermo Scientific LevelPRO Series Benutzerhandbuch

Thermo Scientific

Thermo Scientific SHKE8000 Series Bedienungsanleitung

Thermo Scientific

Thermo Scientific iCAP 7000 Series Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung