Thrustmaster T100 Force Feedback Bedienungsanleitung

1/10

For: PC & PlayStation®3

User Manual

2/10

SETTING UP THE RACING WHEEL

Attaching the racing wheel to a table or a desktop

- Place the racing wheel on a table or any other horizontal, flat and stable surface.

-Insert the fastening screw in the attachment system, then tighten the device by turning the screw

counterclockwise, so that it feeds into the large threaded hole located beneath the racing wheel, until

the device is perfectly stable.

WARNING: Never tighten the screw alone, without the attachment system!

(This could damage the racing wheel).

ASSEMBLY REMOVAL

To tighten:

Turn the screw counterclockwise

To release:

Turn the screw clockwise

Attaching the racing wheel to a cockpit

- Place the racing wheel on the cockpit shelf.

- Drive two M6 screws (not included with the racing wheel) through the cockpit shelf, then feed them into

the two small threaded holes located beneath the racing wheel.

-Then, tighten the standard attachment system by inserting the fastening screw in the large threaded

hole.

3/10

CONNECTING THE RACING WHEEL TO THE MAINS

European versions only

Important note:the European version of the T100 FFB is equipped with an internal power supply, located

directly inside the racing wheel's base.

The European version must exclusively be supplied with 220V!

Never open the racing wheel base – shock hazard!

- Simply connect the racing wheel's mains connector to a 220 V power outlet.

Other versions (non-European)

Note:Contrary to the European version, the non-European T100 FFB features an external power supply;

a specific device is provided with the racing wheel.

- Connect the external adapter to the relevant connector located at the back of the racing wheel, then

connect the external mains power adapter to a standard power outlet featuring the same voltage.

CONNECTING THE PEDAL SET TO THE RACING WHEEL

Connect the pedal set to the racing wheel using the relevant connector, located at the back of the racing

wheel.

AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION

The racing wheel calibration occurs automatically when you connect the racing wheel's power adapter and

USB connector. (This operation causes the racing wheel to move.) The pedal set calibration also occurs

automatically; simply press the pedals a few times.

Important notes to avoid calibration problems:

- Never connect the racing wheel's USB connector before connecting the pedal set

- Never press the pedals when the racing wheel starts

(when the racing wheel self-calibrates following connection, or when starting or exiting a

game)

In PlayStation®3 and PC games,

and in the Control Panel interface on PC,

the racing wheel is recognized as an F430 Force Feedback racing wheel,

which offers the same features as this one

(except buttons 13-17, which are inactive on PC).

4/10

System requirements: PC (Windows® XP, Vista, 7 and 8) featuring a USB port.

Installing the Force Feedback drivers for PC

1. Access http://ts.thrustmaster.com to download the Force Feedback drivers and software for PC (in the

Updates and Downloads section, click PC / Wheels / T100 FFB or PlayStation / Wheels / T100 FFB,

then click Drivers).

2. Once the download and installation are finished, click Finish and restart your computer.

3. Once your computer has restarted, connect the USB connector to one of the USB ports on your CPU.

Windows® automatically detects the new device.

4. Installing the drivers:

Driver installation occurs automatically. Follow the instructions displayed onscreen to complete the

installation.

5. Select Start/Settings/Control Panel, then double-click Game Controllers (or Gaming Options,

according to your operating system).

The Game Controllers dialog displays; the racing wheel appears onscreen, with the status

indication OK.

6. In the Control Panel, click Properties to configure your racing wheel:

•Test Device: Enables you to test and view the buttons, the D-Pad and the racing wheel and pedal

set axes.

•Test Forces: Enables you to test 8 force effects and to configure the Force Feedback and

Automatic centering effects.

You are now ready to race!

Adjusting the Force Feedback effects on PC

On page 2 of the Control Panel, four settings are available and can be adjusted from 0 to 150% :

Main forces / Static forces / Dynamic forces / Aggressiveness

Note:

On PC, always remember to close the Control Panel interface entirely before launching

your game!

5/10

Configuring the pedal set on PC

By default, your racing wheel's accelerator and brake controls operate in "Separate" mode; this setting

means that the pedals operate on independent axes.

This mode considerably improves precision when racing.

If your game is not compatible with the "Separate" mode, the pedal set connected to your racing wheel will

not operate correctly. You will then need to exit the game and select the "Combined" mode (in which both

pedals operate on the same axis).

PEDAL SET MODE

Racing wheel LED

SEPARATE (this mode is recommended for most games)

RED

COMBINED

GREEN

Configuring the pedal set's mode using the software:

(This setting is stored in the device's memory, even after you restart your computer or disconnect and

reconnect your racing wheel.)

- On page 1 of the Control Panel, select the required mode, then click OK.

Configuring the pedal set's mode using the hardware:

(This setting is stored in the device's memory; it must be performed every time you start your computer or

disconnect the racing wheel)

- Press and release both pedals simultaneously (accelerator and brake) + the Force button located on the

racing wheel (F button).

Note:

If your PC game is not compatible with the pedal set's "Separate" mode, we recommend

you switch your racing wheel to the "Combined" mode.

Adjusting the automatic centering feature on PC

By default, the racing wheel's automatic centering feature is deactivated.

Most recent games feature their own automatic centering mode.

It is therefore strongly recommended (in most cases) to deactivate the racing wheel's automatic

centering feature and let your game manage this feature. The Force Feedback quality will be

improved.

The automatic centering mode should essentially be used with games that do not feature a Force

Feedback option, or feature only a "weak" automatic centering feature.

Adjusting the automatic centering feature using the software:

- Access page 2 of the Control Panel interface.

- To deactivate the automatic centering feature, select "By the game".

- To activate the automatic centering feature, select "By the wheel".

In this mode, you can adjust the automatic centering feature's intensity, from 0 to 100%.

Adjusting the automatic centering feature using the hardware:

To activate or deactivate the automatic centering featuring directly within your game, simply press the

Force button (i.e. the "F" button) on your racing wheel. When activated, the automatic centering feature's

intensity matches the value previously defined for the "By the wheel" setting in the Control Panel interface.

AUTOMATIC CENTERING

Racing wheel LED

INACTIVE (mode recommended for all PC Force Feedback games)

NOT FLASHING

ACTIVE

FLASHING

6/10

PLAYSTATION3

Installing the racing wheel on PlayStation®3

- Connect the USB connector to one of your console's USB ports.

You are now ready to race!

General notes for PlayStation®3

- When in the global menu, use your console's official controller (not your racing wheel) to navigate and start

your games.

= The racing wheel's mapping* feature will only run once the game is started.

- The racing wheel doesn't feature a PS button

= Use your console's official controller to exit your games and turn off your console.

- Adjusting the Force Feedback effects on PS3

= You can adjust the in-game force settings in the Options/Controls section (these options are not available in

some games).

- Adjusting the racing wheel and pedal set's sensitivity on PS3

= You can adjust the in-game sensitivity settings in the Options/Controls section (these options are not

available in some games).

- A list of PS3™ games compatible with the racing wheel's Force Feedback feature is available on

http://ts.thrustmaster.com (in the Downloads and Updates section, click PC / Wheels / T100 FFB or

PlayStation / Wheels / T100 FFB, then select Games settings).

HINT:

In some PS3™ games

(e.g. GRAN TURISMO®),

you can use the accelerator pedal to confirm a selection

and use the brake pedal to cancel it.

7/10

TROUBLESHOOTING

- The racing wheel and pedal set do not operate correctly, or calibration seems incorrect:

Turn off your computer or your console, disconnect your racing wheel entirely, then reconnect all cables

(connecting the racing wheel's USB connector last), then restart your computer or your console and your

game.

Always connect the pedal set to the racing wheel before connecting any USB connectors, and never press

any of the pedals while the racing wheels is self-calibrating at startup or the game is starting.

- The racing wheel moves on its own during gameplay:

This is normal; it is caused by the automatic centering feature that is available in some games. To stop

these movements, simply place your hands on the racing wheel or reduce the Force Feedback feature's

intensity.

- The racing wheel is detected, but doesn't work with my game:

Open your game's Options interface to configure your racing wheel. Please refer to your game's user

manual or online help for more information.

- The Force Feedback feature does not react correctly on PC:

In the racing wheel's Control Panel interface (i.e. the Game Controllers interface in Windows®), restore all

forces to their default value (100%) and deactivate the automatic centering feature (the indicator light

should not flash).

In some PC games, it is also necessary to invert the forces (in this case, select "Negative forces" or move

the cursor to "-100%" in your game's options). In other games, the forces should not be inverted (in this

case, select "Positive forces" or move the cursor to "+ 100%" in your game's options).

- The pedal set does not operate correctly in "Separate" mode on PC

(e.g. in the game, the selection cursor moves around on its' own)

Exit the game and switch your pedal set to "Combined" mode. Restart your game, then configure your

racing wheel once more via your game's options management interface.

SAFETY RECOMMENDATIONS AND INFORMATION

- When connecting your racing wheel and during the automatic calibration phase: to avoid

calibration errors, do not turn the racing wheel and do not press any of the pedals or buttons.

- If you do not plan to use your racing wheel for a prolonged period of time, to avoid

pointless electricity consumption and to prevent any damage to your racing wheel,

disconnect the power adapter from the racing wheel. Remember to reconnect the power adapter

before you start playing again!

- Your racing wheel includes a Force Feedback feature: Keep young children away from your

racing wheel, particularly during the automatic calibration phases.

For safety reasons, do not use the pedal set with bare feet or when wearing only socks.

THRUSTMASTER®SHALL NOT BE HELD RESPONSIBLE FOR ANY PHYSICAL INJURIES

OCCURRING WHEN USING THE PEDAL SET WITHOUT SHOES.

8/10

Consumer warranty information

Worldwide, Guillemot Corporation S.A. (hereinafter “Guillemot”) warrants to the consumer that this

Thrustmaster product shall be free from defects in materials and workmanship, for a warranty

period which corresponds to the time limit to bring an action for conformity with respect to this

product. In the countries of the European Union, this corresponds to a period of two (2) years from

delivery of the Thrustmaster product. In other countries, the warranty period corresponds to the

time limit to bring an action for conformity with respect to the Thrustmaster product according to

applicable laws of the country in which the consumer was domiciled on the date of purchase of the

Thrustmaster product (if no such action exists in the corresponding country, then the warranty

period shall be one (1) year from the original date of purchase of the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6)

months from the date of original purchase.

Should the product appear to be defective during the warranty period, immediately contact

Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product

must be returned to its place of purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s

option, be either repaired or replaced. If permitted under applicable law, the full liability of Guillemot

and its subsidiaries (including for consequential damages) is limited to the repair or replacement of

the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of

merchantability or fitness for a particular purpose. The consumer’s legal rights with respect to laws

applicable to the sale of consumer goods are not affected by this warranty.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered

damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any

other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the

Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable

batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) in the event

of failure to comply with the instructions provided by Technical Support; (3) to software, said software

being subject to a specific warranty; (4) to consumables (elements to be replaced over the product’s

lifespan: disposable batteries, audio headset or headphone ear pads, for example); (5) to accessories

(cables, cases, pouches, bags, wrist-straps, for example); (6) if the product was sold at public auction.

This warranty is nontransferable.

Additional warranty provisions

In the United States of America and in Canada, this warranty is limited to the product’s internal

mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any

third party for any consequential or incidental damages resulting from the breach of any express or

implied warranties. Some States/Provinces do not allow limitation on how long an implied warranty

lasts or exclusion or limitation of liability for consequential or incidental damages, so the above

limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and

you may also have other rights which vary from State to State or Province to Province.

9/10

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its

subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the

product has been modified, opened or altered; (2) failure to comply with assembly instructions; (3)

inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear. If

permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages

unrelated to a material or manufacturing defect with respect to the product (including, but not

limited to, any damages caused directly or indirectly by any software, or by combining the

Thrustmaster product with any unsuitable element, including in particular power supplies,

rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Guillemot Corporation S.A. PlayStation® is a registered trademark of Sony Computer

Entertainment, Inc. Windows® is a registered trademark of Microsoft Corporation in the United

States and/or in other countries. All other trademarks and brand names are hereby acknowledged

and are the property of their respective owners. Illustrations not binding. Contents, designs and

specifications are subject to change without notice and may vary from one country to another.

Made in China.

TouchSense® Technology licensed from Immersion Corporation. Protected by one or more of the

U.S. Patents found at the following address www.immersion.com/patent-marking.html and other

patents pending.

Inhaltsverzeichnis

Sprachen:

Andere Thrustmaster Videospiel-Controller Handbücher

Thrustmaster

Thrustmaster 360 modena Force GT Gebrauchsanweisung

Thrustmaster

Thrustmaster FERRARI 488 GT3 WHEEL ADD-ON Bedienungsanleitung

Thrustmaster

Thrustmaster TM OpenWheel Add-On Bedienungsanleitung

Thrustmaster

Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1 Bedienungsanleitung

Thrustmaster

Thrustmaster 360 Spider Gebrauchsanweisung

Thrustmaster

Thrustmaster T80 Ferrari 488 GTB Edition Bedienungsanleitung

Thrustmaster

Thrustmaster T-Wireless Black Bedienungsanleitung

Thrustmaster

Thrustmaster TCA Sidestick X Airbus Edition Bedienungsanleitung

Thrustmaster

Thrustmaster NASCAR PRO FORCE FEEDBACK 2 Gebrauchsanweisung

Thrustmaster

Thrustmaster FireStorm Gebrauchsanweisung

Thrustmaster

Thrustmaster universal challenge Bedienungsanleitung

Thrustmaster

Thrustmaster RUN'N'DRIVE WIRELESS 3-IN-1 Bedienungsanleitung

Thrustmaster

Thrustmaster T.Flight Hotas One Bedienungsanleitung

Thrustmaster

Thrustmaster HOTAS WARTHOG Gebrauchsanweisung

Thrustmaster

Thrustmaster T.Flight Hotas One Gebrauchsanweisung

Thrustmaster

Thrustmaster T300 RS Bedienungsanleitung

Thrustmaster

Thrustmaster TWCS Throttele Bedienungsanleitung

Thrustmaster

Thrustmaster TOP GUN AfterBurner Force Feedback Bedienungsanleitung

Thrustmaster

Thrustmaster FERRARI MOTORS Bedienungsanleitung

Thrustmaster

Thrustmaster T.16000M Bedienungsanleitung

Thrustmaster

Thrustmaster GPX Bedienungsanleitung

Thrustmaster

Thrustmaster TS-XW RACER Sparco P310 Competition Mod Bedienungsanleitung

Thrustmaster

Thrustmaster T60 Bedienungsanleitung

Thrustmaster

Thrustmaster MFD Cougar Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung

Pelican

Pelican Afterglow PL-678 Bedienungsanleitung