Safety and Regulatory Compliance
The operation, maintenance and repair of Gentier mini instrument shall strictly follow
the safety specifications listed in this section and through this manual. The design of
Gentier mini instrument has fully considered its biological contamination protection,
electrical safety protection and mechanical motion protection. Non-observance of the
instructions or performing any operations not stated herein may affect the safety
protection provided, and may also destroy the safety standards of design and
manufacture as well as the expected application scope of the Gentier real-time PCR
system.
XATL Co., Ltd. will not be responsible for any possible consequence caused by either not
read or violate the instructions mentioned herein.
Caution: Please carefully read this manual before operating Gentier Mini
instrument. Incorrect understanding or operations may result in instrument
damage or inefficiency usage, laboratory damage, even personal injury.
Reminding:Please pay attention to the descriptions with “Caution”, “Reminding”,
“Prohibit”symbols, and the safety labels on the instrument and transport package.
I. General Instrument Safeties and Precautions
Caution: No person except the XATL Co., LTD professional engineers are allowed
to open the instrument, to replace any component or to debug Gentier Mini
instrument.
Caution: Do not drop or damage the instrument, and please handle it with care.
Caution: In case of any following conditions, immediately cut off the power supply
and contact the distributor or manufacturer to ask for professional engineer for
processing.
Any liquid has entered into the instrument;
Abnormal sound or smell appears while the instrument is running;
The instrument is soaked with water or rain;
Obvious functional changes of the instrument.
