TomTom ONE Bedienungsanleitung

TomTom ONE

Chapter 1

What’s in the box

aYour TomTom ONE

ATouchscreen

BCharging LED

COn/off button

DSpeaker

EExternal antenna connector

FMemory card slot

GUSB connector

bWindscreen Holder cMemory card (SD

card)

dUSB Car Charger eUSB cable

fProduct code card gDocumentation pack

Chapter 2

Before you start...

Everyone loves TomTom ONE

So never leave your ONE in your car when you’re not using it - it’s an easy target

for thieves.

Always take your ONE, the windscreen holder, and the car charger with you; don’t

leave any TomTom products on display.

Always store your ONE in the carry case to protect the screen.

Backup your TomTom ONE

It’s always a good idea to make a backup of the contents of your TomTom ONE.

You can make a backup using TomTom HOME.

For more information about TomTom HOME, see

Using TomTom HOME

page 44.

Use the safety preferences

To make driving even safer with your TomTom ONE, use the

Safety preferences

the Preferences menu.

You can choose to use the safety lock. If the safety lock is enabled, only a few

buttons and features are available while you are driving. When you are stationary,

all the buttons and features are available.

You can also choose to turn the map display off.

For more information, see

Safety preferences

on page 30.

Secure your TomTom ONE

Set a password for your TomTom ONE so that only you can use it. Every time you

start your ONE you will have to enter your password.

To set your password, run your ONE using TomTom HOME. From the Preferences

menu, click

Set owner

to set a password.

To set the password, you have to run your ONE using TomTom HOME. You can

then use TomTom HOME to set the password. To set a password on your device,

do the following:

1. Connect your ONE to your computer and switch it on.

2. Start TomTom HOME if it does not start automatically.

If you do not have TomTom HOME installed, insert the CD that came with your

ONE to install it.

Safety

preferences

Alternatively, you can download TomTom HOME from

www.tomtom.com

Make sure you always have the latest version of TomTom HOME. For more

information about TomTom HOME, see

Using TomTom HOME

on page 44.

3. In the Planning section, select your ONE.

A picture of your ONE is shown in the main section of TomTom HOME.

4. Click the On/Off button on the picture of your ONE to switch it on in TomTom

HOME.

Your ONE starts in TomTom HOME. You can now set the password on your ONE

using TomTom HOME. Don't unplug your ONE, just use it as you normally would

by clicking the buttons shown on your computer.

5. From the Main Menu in your device, click

Change preferences

6. Click

Set owner

. You may have to click the arrow until you reach the page where

Set owner

is shown.

If you cannot find the button

Set owner

, make sure that all buttons are shown

in your ONE. Tap the button

Show ALL menu options

. All buttons will now be

shown.

You can now set the password for your ONE. You can also set your name and

address, which will then be shown when your ONE starts up.

Ta ke c a r e o f y ou r To m To m ON E

It is important to take care of your ONE and to clean it correctly.

• Use a soft cloth to wipe the screen of your ONE; do not use any liquid cleaners.

• If your ONE gets wet, dry it with a soft cloth.

• Do not open the casing of your ONE under any circumstances. Doing so may

be dangerous and will invalidate your warranty.

• Do not use the memory card (SD card) with any device other than a TomTom

device. Other devices may damage the memory card.

• Do not expose your ONE to high or low temperatures, which can cause

permanent damage. For example, don’t leave it in the car on hot summer days

or during cold winter nights.

Set owner

Chapter 3

Getting started

Switching on

Follow the instructions on the Installation Poster to dock your TomTom ONE in

your car.

The first time you switch on your TomTom ONE, it may take up to 20 seconds to

start. To switch off your TomTom ONE, press and hold the On/Off button for 2

seconds.

Setting up

You have to answer a few questions to set up your TomTom ONE. Answer the

questions by tapping the screen. You will use the touchscreen for everything you

do with your ONE.

You can change these settings at any time using the Preferences menu. For

information about the Preferences menu, see

Preferences

on page 29.

Once you have answered the questions, your ONE will display the Driving View.

The Driving View is shown in black and white until your ONE locates your current

position.

For more information about the Driving View, see

Driving View

on page 13.

Locating your current position

Your TomTom ONE must be outdoors to locate your current position. The first time

you start your ONE, it can take up to 5 minutes to find your current position. If it

takes longer than 5 minutes, make sure that you are in an open place without tall

buildings or trees around you.

In the future, your position will be found much faster, normally within a few

seconds.

Once your ONE has located your current position, the Driving View is shown in full

colour and shows your position on the map.

Note: Your TomTom ONE does not transmit your position. You can however

send your position to TomTom Buddies. For more information, visit

www.tomtom.com/plus

Note: Some vehicles have a heat reflective shield embedded in the

windscreen, which may prevent TomTom ONE from locating your current

position. If this is a problem in your vehicle, use the TomTom External

Antenna Kit (available as an accessory).

Chapter 4

Making your first journey

Planning a route with TomTom GO is very simple. To plan your first route, follow

the steps below.

1. Tap the screen to bring up the main menu.

2. Tap

Navigate to...

For your first journey, we will navigate to an address.

3. Tap

Address

When you enter an address, you can choose from four options:

•

City centre

- tap this button to set your destination as the centre of a city or

town.

•

Street and house number

- tap this button to set an exact address as your

destination.

•

Postcode

- tap this button to enter a postcode as your destination.

•

Crossing or intersection

- tap this button to set your destination as the point

where two streets meet.

Note: You should always plan your journeys before you start driving. It is

dangerous to plan routes when you are already moving.

Note: You can enter a postcode for any country. In the UK and the

Netherlands, postcodes are detailed enough to identify a house on their

own. In other countries you can enter a postcode to identify a town or area.

You will then have to enter a street and house number.

For your first journey, we will enter an exact address.

4. Tap

Street and house number

5. Start to type the name of the town where you want to go.

As you type, the names of the towns that match what you have typed are

shown.

6. Start to type the name of the street.

As with the name of the town, the names of the streets that match what you

have typed are shown.

7. Now enter the house number of your destination and then tap

Done

8. GO asks you whether you need to arrive at a particular time.

Tap

YES

to enter an arrival time. GO shows you whether you will arrive on time.

For more information, see

Arrival times

on page 9.

The route is then calculated by your TomTom GO.

9. When the route has been calculated, tap

Done

TomTom GO will immediately start guiding you to your destination with spoken

instructions and visual instructions on the screen.

Arrival times

Tap

YES

to enter an arrival time.

Your GO calculates your arrrival time and shows you whether you will arrive on

time.

You can also use this information to work out when you need to leave. If your GO

shows you that you will arrive 30 minutes early, you can wait and leave in 30

minutes time, rather than arrive early.

Your arrival time is constantly recalculated during your journey. The status bar

shows whether you will arrive on time or late, as shown below:

Note: Before you can plan a route in this way, TomTom GO must first locate

your current position.

You will arrive 55 minutes before the arrival time you entered.

If the estimated arrival time is more than five minutes before the

time you entered, it is shown in green.

You will arrive 3 minutes before the arrival time you entered.

If the estimated arrival time is less than 5 minutes before the

time you entered, it is shown in yellow.

You will arrive 19 minutes late.

If the estimated arrival time is later than the time you entered, it

is shown in red.

What are the other navigation options?

When you tap

Navigate to...

, you can set your destination in many ways, not just

by entering the address. The other options are listed below:

Planning in advance

You can also use your GO to plan journeys in advance by selecting both your

starting point and your destination. You could, for example, do the following:

• Find out how long a journey is going to take before you start.

• Check the route of a journey you are planning.

• Check a route for someone who is coming to you and explain the route to them.

To plan a route in advance, follow these steps:

1. Tap the screen to bring up the main menu.

2. Tap

Advanced planning

Home

Tap this button to navigate to your Home location.

You will probably use this button more than any other.

For information about setting your Home location, see Change Home

location on page 31.

Favourite

Tap this button to select a Favourite as your destination.

For more information about Favourites, see Favourites on page 19.

Recent

destination

Tap this button to select your destination from a list of places you have

recently used as destinations.

Point of

Interest

Tap this button to navigate to a Point of Interest (POI).

For more information about POIs and navigating to a POI, see Points of

Interest on page 22.

Point on map

Tap this button to select a point on the map as your destination using the

map browser.

For more information about the map browser, see Using the map on

page 17.

Latitude

Longitude

Tap this button to enter a destination with latitude and longitude values.

To m To m

Buddy

Tap this button to navigate to the current position of a TomTom Buddy. Don’t

forget that the Buddy may move before you reach him.

For more information about TomTom Buddies, see TomTom PLUS on

page 42.

Andere Handbücher für ONE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TomTom GPS Handbücher

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom ONE Bedienungsanleitung

TomTom

TomTom Blue&Me- Bedienungsanleitung

TomTom

TomTom Go 920 Bedienungsanleitung

TomTom

TomTom RIDER Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom VIA Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom GO 6200 Bedienungsanleitung

TomTom

TomTom Go 2535M LIVE Bedienungsanleitung

TomTom

TomTom RIDER Bedienungsanleitung

TomTom

TomTom ONE Bedienungsanleitung

TomTom

TomTom Mobile Bedienungsanleitung

TomTom

TomTom Eclipse AVN2210p Bedienungsanleitung

TomTom

TomTom Go 730 Bedienungsanleitung

TomTom

TomTom Navigator Navigator 2 Bedienungsanleitung

TomTom

TomTom ONE Bedienungsanleitung

TomTom

TomTom LINK 201 Bedienungsanleitung

TomTom

TomTom NAVIGATION SYSTEM Bedienungsanleitung

TomTom

TomTom ECLIPSE Bedienungsanleitung

TomTom

TomTom NAVIGATOR 5 Bedienungsanleitung

TomTom

TomTom GO Camper Bedienungsanleitung

TomTom

TomTom Navigator Navigator 4 Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung