Toro 04052TE Bedienungsanleitung

OPERATOR’S

MANUAL

FORM NO. 3318-241 GB Rev A



MODEL NO. 04052TE—60001 & UP



GREENSMASTER®1000

FOREWORD

The GREENSMASTER 1000 was developed to pro-

vide an efficient, trouble-free method of mowing high

quality-turf on the finest greens. The latest concepts of

engineering, design and safety have been incorporated

into this machine, along with the highest quality parts

and workmanship. Excellent service will be derived if

proper operation and maintenance practices are fol-

lowed.

Safety, mechanical and some general information in

this manual are emphasized. DANGER, WARNING

and CAUTION identify safety messages. Whenever

the triangle safety symbol appears, it is followed by a

safety message that must be read and understood. For

more details concerning safety, read the safety instruc-

tions on pages 3 and 4. IMPORTANT identifies spe-

cial mechanical information and NOTE identifies gen-

eral information worthy of special attention.

If help about operation or safety is ever needed, con-

tact your local Authorized TORO Distributor. In addi-

tion to genuine TORO replacement parts, the distribu-

tor also has optional equipment for the complete line

of TORO turf care equipment. Keep your Toro all

TORO. Buy genuine TORO parts and accessories.

TABLE OF CONTENTS

Safety 3

Specifications 9

Before Operating 10

Controls 15

Operating 17

Maintenance 19

Identification and Ordering 21

Training

1. Read the instructions carefully. Be familiar with

the controls and the proper use of the equipment.

2. Never allow children or people unfamiliar with

these instructions to use the lawn mower. Local

regulations may restrict the age of the operator.

3. Never mow while people, especially children, or

pets are nearby.

4. Keep in mind that the operator or user is responsi-

ble for accidents or hazards occurring to other

people or their property.

5. Do not carry passengers.

6. All drivers should seek and obtain professional

and practical instruction. Such instruction should

emphasize:

• the need for care and concentration when

working with ride-on machines;

• control of a ride-on machine sliding on a

slope will not be regained by the application

of the brake. The main reasons for loss of

control are:

– insufficient wheel grip;

– being driven too fast;

– inadequate braking;

– the type of machine is unsuitable for its

task;

– lack of awareness of the effects of

ground conditions, especially slopes;

– ##incorrect hitching and load distribu-

tion.

Preparation

1. While mowing, always wear substantial footwear

and long trousers. Do not operate the equipment

when barefoot or wearing open sandals.

2. Thoroughly inspect the area where the equipment

is to be used and remove all objects which may

be thrown by the machine.

3. WARNING—Petrol is highly flammable.

• Store fuel in containers specifically designed

for this purpose.

• Refuel outdoors only and do not smoke

while refueling.

• Add fuel before starting the engine. Never

remove the cap of the fuel tank or add petrol

while the engine is running or when the

engine is hot.

• If petrol is spilled, do not attempt to start the

engine but move the machine away from the

are of spillage and avoid creating any source

of ignition until petrol vapors have dissipat-

ed.

• Replace all fuel tanks and container caps

securely.

4. Replace faulty silencers.

Operation

1. Do not operate the engine in a confined space

where dangerous carbon monoxide fumes can col-

lect.

2. Mow only in daylight or in good artificial light.

3. Before attempting to start the engine, disengage

all blade attachment clutches and shift into neu-

tral.

4. Do not use on slopes of more than:

• Never mow side hills over 5°

• Never mow uphill over 10°

• Never mow downhill over 15°

5. Remember there is no such thing as a “safe”

slope. Travel on grass slopes requires particular

Safety

care. To guard against overturning:

• do not stop or start suddenly when going up

or downhill;

• engage the clutch slowly, and always keep

the machine in gear, especially when travail-

ing downhill;

• machine speeds should be kept low on slopes

and during tight turns;

• stay alert for bumps and hollows and other

hidden hazards;

• never mow across the face of the slope,

unless the lawn mower is designed for this

purpose.

6. Use care when pulling loads or using heavy

equipment.

• Use only approved drawbar hitch points.

• Limit loads to those you can safely control.

• Do not turn sharply. Use care when revers-

ing.

• Use counterweight(s) or wheel weights when

suggested in the instruction handbook.

7. Watch out for traffic when crossing or near road-

ways.

8. Stop the blades rotating before crossing surfaces

other than grass.

9. When using any attachments, never direct dis-

charge of material toward bystanders nor allow

anyone near the machine while in operation .

10. Never operate the lawn mower with defective

guards, shields or without safety protective

devices in place.

11. Do not change the engine governor settings or

overspeed the engine. Operating the engine at

excessive speeds may increase the hazard of per-

sonal injury.

12. Before leaving the operator’s position:

• disengage the power take-off and lower the

attachments;

• change into neutral and set the parking

brake;

• stop the engine and remove the key.

13. Disengage the drive to attachments when trans-

porting or not in use.

14. Stop the engine and disengage the drive to the

attachment

• before refueling;

• before removing the grass catcher;

• before making height adjustments unless the

adjustment can be made from the operator’s

position.

• before clearing blockages;

• before checking, cleaning or working on the

lawnmower;

• after striking a foreign object. Inspect the

lawnmower for damage and make repairs

before restarting and operating the equip-

ment.

15. Reduce the throttle setting during engine runout

and, if the engine is provided with a shutoff valve,

turn the fuel off at the conclusion of mowing.

Maintenance and Storage

1. Keep all nuts, bolts and screws tight to be sure the

equipment is in safe working condition.

2. Never store the equipment with petrol in the tank

inside a building where fumes may reach an open

flame or spark.

3. Allow the engine to cool before storing in any

enclosure.

4. To reduce the fire hazard, keep the engine,

silencer, battery compartment and petrol storage

area free of grass, leaves, or excessive grease.

5. Check the grass catcher frequently for wear or

deterioration.

6. Replace worn or damaged parts for safety.

7. If the fuel tank has to be drained, this should be

done outdoors.

8. Be careful during adjustment of the machine to

prevent entrapment of the fingers between moving

blades and fixed parts of the machine.

9. On multi-bladed machines, take care as rotating

one blade can cause other blades to rotate.

10. When the machine is to be parked, stored or left

unattended, lower the cutting means unless a pos-

itive mechanical lock is used.

Sound &Vibration Levels

Sound Levels

This unit has an equivalent continuous A-weighted

sound pressure at the operator ear of: 83 dB(A), based

on measurements of identical machines per

84/538/EEC.

This unit has a sound power level of 95 dB(A)/1pW,

based on measurements of identical machines per pro-

cedures outlined in Directive 79/113/EEC and amend-

ments

Vibration Levels

This unit has a vibration level of 10.5 m/s2at the pos-

terior, based on measurements of identical machines

per ISO 2631 procedures.

Symbol Glossary

Caustic liquids, 

chemical burns to 

fingers or hand

Poisonous 

fumes or toxic 

gases, asphyxiation

Electrical shock,

electrocution High pressure

fluid, injection 

into body

High pressure

spray, erosion of

flesh

High pressure

spray, erosion of

flesh

Crushing of 

fingers

or hand, 

force

applied from 

above

Crushing of 

toes or foot, force

applied from above

Crushing of 

whole body, 

applied from 

above

Crushing of 

torso, force 

applied from side

Crushing of fingers 

or hand/, force 

applied from side

Crushing of 

whole body Crushing of 

head, torso and 

arms

Cutting of 

fingers or hand Cutting of footCrushing of leg, 

force applied 

from side

Cutting or 

entanglement of 

foot, rotating auger

Severing of 

foot, rotating 

knives

Severing of 

fingers or hand, 

impeller blade

Wait until all 

machine 

components have 

completely stopped 

before touching them

Severing of

fingers or hand, 

engine fan

Whole body entanglement, 

implement input drive line Fingers or 

hand entangle-

ment, chain drive

Runover/back-

over, (relevant 

machine to appear 

in dashed box)

Machine tipping, 

riding mower Machine rollover,

ROPS (relevant 

machine to appear 

in dashed box)

Stored energy

hazard, kickback

or upward motion

Hot surfaces, 

burns to fingers 

or hands

Hand & arm

entanglement,

belt drive

Thrown or fly-

ing objects, whole

body exposure

Thrown or 

flying objects, 

face exposure

Explosion Fire or open 

flame

Secure lifting 

cylinder with locking 

device before getting 

in hazardous area

Stay a safe 

distance from 

the machine

Stay clear of 

articulation area 

while engine is 

running

Do not open 

or remove safety 

shields while 

engine is 

running

Do not step on 

loading platform if 

PTO is connected to tractor 

& engine is running

Do not step

Shut off engine 

& remove key before 

performing mainten-

ance or repair work

Riding on this 

machine is allowed 

only on a passen-

ger seat & only if the 

driver’s view is not 

hindered

Consult 

technical manual 

for proper service 

procedures

Fasten seat belts Safety alert 

triangle outline safety

alert symbol Read operator’s 

manual

Fire, open light

& smoking

prohibited

Hydraulic

system Brake system Oil Coolant (water) Intake air Exhaust gas Pressure

Level

indicator Liquid level Filter Temperature Failure/

Malfunction Start switch/

mechanism On/start Off/stop

Plus/increase/

positive polarity

Engage Disengage Attachment

lower Attachment

raise Spacing distance Snow thrower,

collector auger Minus/decrease/

negative polarity

Horn Battery charging

condition

Hourmeter/elapsed

operating hours Fast Slow Continuous

variable, linear Volume empty Volume full

Machine travel

direction,

forward/rearward

Control lever

operating

direction, dual

direction

Control lever

operating

direction, multiple

direction

Clockwise

rotation Counter-clock-

wise rotation Grease

lubrication

point

Oil lubrication

point Lift point

Jack or

support point Draining/

emptying Engine lubricat-

ing oil Engine lubricating

oil pressure Engine lubricating

oil level Engine lubricating

oil filter Engine

lubricating oil

temperature

Engine coolant

Flush with water Engine Transmission

Hearing

protection must

be worn

Caution, toxic

risk

Eye protection

must be worn Head protection

must be worn First aid

Transmission

failure/malfunction Clutch Neutral High Low Forward Reverse Park

NHLFRP

First gear Second gear

Third gear (other #'s

may be used until

the maximum # of for-

ward gears is reached.)

Hydraulic oil Hydraulic oil

temperature

231

Hydraulic oil

pressure Hydraulic oil level Hydraulic oil filter

Hydraulic oil

failure/malfunction Parking brake Fuel Fuel level Fuel filter Fuel system

failure/malfunction

Diesel fuel Unleaded fuel

Headlights Lock Unlock Differential lock 4-Wheel drive Power Take-Off Power Take-Off,

rotational speed Reel cutting

element

Reel cutting

element, height

adjustment

Traction Above working

temperature range

Drilling Manual metal arc

welding Manual 0356 Water pump 0626 Keep dry

0430 weight Do not dispose

in the garbage CE logo

Engine coolant

pressure Engine coolant f

ilter Engine

lubricating oil

pressure

Engine intake/

combustion air Engine intake/

combustion air

pressure

Engine intake/

air filter Engine start Engine stop

Engine failure/

malfunction Engine rotational

speed/frequency Choke Primer (start aid) Electrical preheat

(low temperature

start aid)

Transmission oil Transmission oil

pressure

n/min

Transmission oil

temperature

Engine: Kawasaki, air cooled, overhead valve, 4 cycle,

3.7 horsepower, 2.36” x 1.73” bore and stroke, 7.57

cu. in. (124 cc) displacement, 8.4:1 compression ratio,

11 ft. lbs. @ 1400 rpm. Electronic ignition, maximum

noise suppression muffler. 2.64 quart fuel tank capaci-

ty.

Traction Drive: Engine to countershaft drive: two “A”

section V—belts. Countershaft to differential drive: 5

mm pitch timing belt. Differential to drum drive: 8 mm

pitch timing belt.

Differential: Peerless Series 100.

Transport Clutch: Belt idler

Brake: Band drum

Optional Transport Tires: Quick detachable,

3.00/3.25 x 6, 32.5 tread width.

Traction Drum: Dual cast aluminum, 7.5” Diameter.

Controls: Engine has recoil starter and choke. Handle

has on/off switch, throttle lever, traction engage lever

and service/ park brake lever. The mower has reel

drive engage lever. Safety devices: neutral interlock

system.

Handle: Loop style, 1” Diameter.

Reel Construction: 5” diameter, 11 carbon steel

blades welded to 5 stamped steel spiders.

Width of Cut: 21”

Height of Cut Range: 5/64” to 1/2”

Clip: .16”

Reel Clutch: Jaw Type.

Bedknife and bedbar: Single edged high carbon steel

bedknife, induction hardened to Rc 48—55. Fastened

to machined, cast iron bedbar. Tournament bedknife

(Part No. 63-8560), standard.

Grass Basket: Molded polyethylene.

Dimensions:

Width: 36”

Height: 47”

Length: 59”

Dry Weight: 208 lbs. with basket and Wiehle

roller, without wheels or grooming reel.

Specifications

ADD OIL

Initially, the crankcase must be filled with 16 ounces

of proper viscosity oil (See chart below). Use any

high-quality detergent oil having the American

Petroleum Institute (API) “service classification”–MS,

or SC.

Temperature Oil Viscosity

10°C or below SAE 10W30

10°C to 35°C SAE 10W30 or 30

Above 35°C SAE 40

1. Position the mower so the engine is level and

clean around the oil level gauge (Fig. 1).

Fig. 1

1. Oil level gauge

2. Remove the gauge by turning it counterclockwise.

3. Wipe the gauge clean and insert it into the filler

port. Then remove it and check the level of oil.

Do not screw the gauge into the port. If the level

is low, add only enough oil to raise the level to

the filler opening.

Note: We recommend that the oil level be

checked each time the mower is used or after

every 5 operating hours. Initially, change the oil

after the first 20 hours of operation; thereafter,

change the oil after every 50 hours of operation.

More frequent oil changes are required in dusty or

dirty conditions.

FILLTHE FUELTANK

NOTE: THE TORO COMPANY STRONGLY REC-

OMMENDS THE USE OF FRESH, CLEAN,

UNLEADED REGULAR GRADE GASOLINE IN

TORO GASOLINE POWERED PRODUCTS.

UNLEADED GASOLINE BURNS CLEANER,

EXTENDS ENGINE LIFE, AND PROMOTES GOOD

STARTING BY REDUCING THE BUILD-UP OF

COMBUSTION CHAMBER DEPOSITS. LEADED

GASOLINE CAN BE USED IF UNLEADED IS NOT

AVAILABLE.

NOTE: NEVER USE METHANOL, GASOLINE

CONTAINING METHANOL, GASOLINE CON-

TAINING MORE THAN 10% ETHANOL, GASO-

LINE ADDITIVES, PREMIUM GASOLINE OR

WHITE GAS BECAUSE FUEL SYSTEM DAMAGE

COULD RESULT.

1. Clean around the fuel tank cap and remove the

cap from tank (Fig. 2). Using unleaded gasoline,

fill the fuel tank no higher than to the bottom of

the filter screen. DO NOT OVER FILL.

Fig. 2

1. Fuel tank cap

2. Install the fuel tank cap and wipe up any spilled

gasoline.

Preparation Before Operating

Andere Handbücher für 04052TE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toro Rasenmäher Handbücher

Toro

Toro Groundsmaster 300 Series Bedienungsanleitung

Toro

Toro 30316 Bedienungsanleitung

Toro

Toro TimeCutter MyRIDE Bedienungsanleitung

Toro

Toro 20058 Bedienungsanleitung

Toro

Toro 30488 Bedienungsanleitung

Toro

Toro Master Commercial 3000 Series Bedienungsanleitung

Toro

Toro LT-F3000 Bedienungsanleitung

Toro

Toro 20330 - Low Wheel Walk Power Mower Bedienungsanleitung

Toro

Toro 30881 Bedienungsanleitung

Toro

Toro 74490 Bedienungsanleitung

Toro

Toro 04130 Greensmaster 500 Bedienungsanleitung

Toro

Toro 02003-90001 Bedienungsanleitung

Toro

Toro Groundsmaster 4500-D Bedienungsanleitung

Toro

Toro GREENSMASTER 1000 Bedienungsanleitung

Toro

Toro Recycler 20339 Bedienungsanleitung

Toro

Toro 22176TE Bedienungsanleitung

Toro

Toro GrandStand 74534TE Bedienungsanleitung

Toro

Toro 74723 Bedienungsanleitung

Toro

Toro HDX SD 2000 Series Bedienungsanleitung

Toro

Toro Groundsmaster 200 Series Bedienungsanleitung

Toro

Toro 3675 Bedienungsanleitung

Toro

Toro 4356 Bedienungsanleitung

Toro

Toro 20786 Bedienungsanleitung

Toro

Toro Recycler 21442 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung