Toro Groundsmaster 7200 Series Bedienungsanleitung

Form No. 07150SL Rev D

Groundsmaster®7200/7210

(Models with Kubota Engine)

Original Instructions (EN)

THE TORO COMPANY 2020

This document and all information contained herein is the sole property of The Toro Company (and/or its affiliated companies). No

intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be

reproduced by a third party without the express written consent of The Toro Company (and/or the appropriate affiliated company).

Revision History

Revision

Date

Description

2007

Initial Issue.

2016

Updated Hydraulic and Electrical chapters.

03/2018

Added revision history.

03/2019

Updated Engine and Chassis chapters.

06/2020

Updated Foldout Diagrams.

Reader Comments

The Toro Company Technical Assistance Center maintains a continuous effort to improve the quality

and usefulness of its publications. To do this effectively, we encourage user feedback.

Please comment on the completeness, accuracy, organization, usability, and readability of this manual

by an e-mail to [email protected]

or Mail to:

Technical Publication Manager, Commercial

The Toro Company

8111 Lyndale Avenue South

Bloomington, MN 55420-1196

Phone: +1 952-887-8495

NOTES _

(Models with Kubota Engine)

PART NO. 07150SL (Rev. D)

Service Manual

Groundsmaster 7200/7210

Preface

The purpose of this publication is to provide the service

technician with information for troubleshooting, testing,

and repair of major systems and components on

Groundsmaster 7200 and 7210 machines that are

REFER TO THE OPERATOR’S MANUAL FOR OPER-

ATING, MAINTENANCE AND ADJUSTMENT

INSTRUCTIONS. Space is provided in Chapter 2 of this

book to insert the Operator’s Manual and Parts Catalog

for your machine. Replacement Operator’s Manuals

and Parts Catalogs are available on the internet at

www.Toro.com.

The Toro Company reserves the right to change product

specifications or this publication without notice.

This safety symbol means DANGER, WARNING

or CAUTION, PERSONAL SAFETY INSTRUC-

TION. When you see this symbol, carefully read

the instructions that follow. Failure to obey the

instructions may result in personal injury.

NOTE: ANOTE will give general information about the

correct operation, maintenance, service, testing or

repair of the machine.

IMPORTANT: The IMPORTANT notice will give im-

portant instructions which must be followed to pre-

vent damage to systems or components on the

machine.

EThe Toro Company -- 2007, 2016, 2018, 2019, 2020

Groundsmaster 7200/7210

This page is intentionally blank.

Groundsmaster 7200/7210

Table Of Contents

Chapter 1 -- Safety

General Safety Instructions 1 -- 1..................

Jacking Instructions 1 -- 4.........................

Chapter 2 -- Product Records and Maintenance

Product Records 2 -- 1...........................

Maintenance 2 -- 1...............................

Equivalents and Conversions 2 -- 2................

Torque Specifications 2 -- 3.......................

Chapter 3 -- Kubota Diesel Engine

Specifications 3 -- 2..............................

General Information 3 -- 4........................

Adjustments 3 -- 5...............................

Service and Repairs 3 -- 6........................

KUBOTA WORKSHOP MANUAL, DIESEL ENGINE,

05 SERIES

Chapter 4 -- Hydraulic System

Specifications 4 -- 2..............................

General Information 4 -- 3........................

Hydraulic Schematics 4 -- 9.......................

Hydraulic Flow Diagrams 4 -- 10...................

Special Tools 4 -- 18.............................

Troubleshooting 4 -- 20...........................

Test ing 4 -- 24...................................

Service and Repairs 4 -- 43.......................

PARKER TORQMOTORTM SERVICE PROCEDURE

(TC, TB, TE, TJ, TF, TG, TH AND TL SERIES)

Chapter 5 -- Electrical System

Electrical Schematics and Diagrams 5 -- 1..........

Special Tools 5 -- 2..............................

Troubleshooting 5 -- 4............................

Electrical System Quick Checks 5 -- 8..............

Component Testing 5 -- 10........................

Service and Repairs 5 -- 31.......................

Chapter 6 -- Chassis

Specifications 6 -- 2..............................

General Information 6 -- 3........................

Service and Repairs 6 -- 4........................

Chapter 7 -- Cutting Deck

General Information 7 -- 2........................

Factors That Can Affect Cutting Performance 7 -- 3..

Service and Repairs 7 -- 5........................

Chapter 8 -- Foldout Diagrams

Electrical Drawing Designations 8 -- 2..............

Hydraulic Schematics 8 -- 3.......................

Electrical Schematics 8 -- 9.......................

Electrical Circuit Diagrams 8 -- 13..................

Wire Harness Drawings 8 -- 17....................

SafetyProduct Records

and Maintenance

Kubota

Diesel Engine

Hydraulic

System

Electrical

System

ChassisCutting

Deck

Foldout

Diagrams

Groundsmaster 7200/7210

This page is intentionally blank.

Groundsmaster 7200/7210 Page 1 – 1 Safety

Chapter 1

Safety

Table of Contents

GENERAL SAFETY INSTRUCTIONS 1. . . . . . . . . . . .

Supervisor’s Responsibilities 1. . . . . . . . . . . . . . . . .

Before Operating 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

While Operating 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance and Service 3. . . . . . . . . . . . . . . . . . . .

JACKING INSTRUCTIONS 4. . . . . . . . . . . . . . . . . . . . .

General Safety Instructions

Groundsmaster 7200 and 7210 machines meet or ex-

ceed safety standard specifications as identified in the

Operator’s Manual. Although hazard control and acci-

dent prevention are dependent partially upon the design

and configuration of the machine, these factors are also

dependent upon the awareness, concern and proper

training of the personnel involved in the operation, trans-

port, maintenance and storage of the machine. Improp-

er use or maintenance by the operator or owner of the

machine can result in injury. To reduce the potential for

any injury, comply with the following safety instructions

as well as information found in the Operator’s Manual.

WARNING

To reduce the potential for injury or death,

comply with the following safety instructions.

Supervisor’s Responsibilities

1. Make sure operators are thoroughly trained and fa-

miliar with the Operator’s Manual, Operator Training

DVD and all of the operating and safety decals on the

machine.

2. Be sure to establish your own special procedures

and work rules for unusual operating conditions (e.g.

slopes too steep for machine operation). Survey mow-

ing site completely to determine which hills can be

operated on safely. When performing this site survey,

always use common sense and take into consideration

the turf condition and the rollover risk. To perform a site

survey, follow the procedure outlined in the Operator’s

Manual.

Safety

Rev. A Groundsmaster 7200/7210Page 1 - 2Safety

Before Operating

1. Review and understand the contents of the Opera-

tor’s Manual and Operator Training DVD before starting

and operating the machine. Become familiar with the

controls and know how to stop the machine and engine

quickly. A replacement Operator’s Manual is available

on the Internet at www.Toro.com.

2. Keep all shields, safety devices and decals in place.

If a shield, safety device or decal is defective, illegible or

damaged, repair or replace it before operating the ma-

chine.

3. Tighten any loose nuts, bolts or screws to ensure

machine is in safe operating condition.

4. Assure interlock switches are adjusted correctly so

engine cannot be started unless both drive handles are

in the neutral lock position, the PTO switch is OFF (dis-

engaged) and either the seat is occupied or the parking

brake is applied.

5. Since fuel is highly flammable, handle it carefully:

A. Store fuel in containers specifically designed for

this purpose.

B. Do not remove machine fuel tank cap while en-

gine is hot or running.

C. Do not smoke while handling fuel.

D. Fill fuel tank outdoors and only to within an inch of

the top of the tank, not the filler neck. Do not overfill.

E. Replace fuel tank and fuel container caps secure-

ly after refueling machine.

F. If fuel is spilled, do not attempt to start the engine

but move the machine away from the area of the spill-

age. Avoid creating any source of ignition until fuel

vapors have dissipated. Wipe up any spilled fuel.

While Operating

1. Sit on the seat when starting and operating the ma-

chine.

2. Before starting the engine:

A. Engage the parking brake.

B. Make sure both drive handles are in the neutral

lock position and the PTO switch is OFF (disen-

gaged).

C. After engine is started, release parking brake and

keep both drive handles in the neutral lock position.

Machine must not move. If movement is evident, the

traction linkage is adjusted incorrectly; therefore,

shut engine off and adjust traction linkage until ma-

chine does not move when both drive handles are in

the neutral lock position.

3. Do not run engine in a confined area without ade-

quate ventilation. Exhaust fumes are hazardous and

could possibly be deadly.

4. Do not touch engine, radiator or exhaust system

while engine is running or soon after it is stopped. These

areas could be hot enough to cause burns.

5. Before getting off the seat:

A. Ensure that both drive handles are in the neutral

lock position.

B. Lower and disengage cutting deck (or imple-

ment) and wait for all movement to stop.

C. Set parking brake.

D. Stop engine and remove key from ignition switch.

6. Anytime the machine is parked (short or long term),

the cutting deck (or implement) should be lowered to the

ground. This relieves pressure from the lift circuit and

eliminates the risk of the cutting deck (or implement) ac-

cidentally lowering to the ground.

7. Do not park on slopes unless wheels are chocked or

blocked.

Andere Handbücher für Groundsmaster 7200 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toro Rasenmäher Handbücher

Toro

Toro 73570 Bedienungsanleitung

Toro

Toro 30488 Bedienungsanleitung

Toro

Toro 04718 Bedienungsanleitung

Toro

Toro 29732 Bedienungsanleitung

Toro

Toro 03188 Bedienungsanleitung

Toro

Toro Groundsmaster 4700-D Bedienungsanleitung

Toro

Toro 21062 Bedienungsanleitung

Toro

Toro TITAN ZX6020 Bedienungsanleitung

Toro

Toro TITAN MX5480 Bedienungsanleitung

Toro

Toro 30403 Bedienungsanleitung

Toro

Toro Z580-D Z Master 74266 Bedienungsanleitung

Toro

Toro Tru Trak Sulky 30110 Bedienungsanleitung

Toro

Toro Z Master 74936 Bedienungsanleitung

Toro

Toro 73471 Handbuch

Toro

Toro 04472 Bedienungsanleitung

Toro

Toro 74162 Bedienungsanleitung

Toro

Toro STRIPE 21621 Bedienungsanleitung

Toro

Toro ProLine 30196 Bedienungsanleitung

Toro

Toro 20487 Bedienungsanleitung

Toro

Toro Greensmaster 3150 Bedienungsanleitung

Toro

Toro 58620 Bedienungsanleitung

Toro

Toro 74590 Bedienungsanleitung

Toro

Toro 3422 Bedienungsanleitung

Toro

Toro 20064 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 050 thru 062 Bedienungsanleitung