Toro ROPS Reelmaster 5210 Bedienungsanleitung

TABLE OF CONTENTS

INTRODUCTION –TO THE PURCHASER 4

PACKING LIST/PARTS PHOTOS 5

DECALS 6

MOUNTING INSTRUCTIONS 7

TO THE PURCHASER

All products are designed to give safe, dependable service if they are operated and

maintained according to instructions. Read and understand this manual before

operation.

This manual has been prepared to assist the owner and operators in the safe operation

and suitable maintenance of the canopy. The information is applicable to products at the

time of manufacture and does not include modifications made afterwards.

Read and understand this manual before attempting to put equipment into service.

Familiarize yourself with the operating instructions and all the safety

recommendations contained in this manual and those labeled on the equipment and on

the tractor. Follow the safety recommendations and make sure that those

with whom you work follow them.

Illustrations

The illustrations may not necessarily reproduce the full detail and the exact shape of the

parts or depict the actual models, but are intended for reference only.

Direction Reference

All references to right and left, forward or rearward, are from the operator’s seat,

facing the steering wheel.

Safety Precautions

All products are designed to give safe, dependable service if they are operated and

maintained according to instructions. Read and understand this manual before

operation. It is the owner’s responsibility to be certain anyone operating this product

reads this manual, and all other applicable manuals, to become familiar with this canopy

and all safety precautions. Failure to do so could result in serious personal injury or

canopy damage. If you have any questions, consult your dealer.

To assist your TORO distributor/dealer in handling your needs, please record hereafter

the model number and serial number of your canopy and tractor. It is also advisable to

supply them to your insurance company. It will be helpful in the event that the canopy or

tractor is lost or stolen.

TRACTOR CANOPY

MODEL:

_____________________________________________________________________

SERIAL NUMBER:

_____________________________________________________________________

DATE OF PURCHASE:

_____________________________________________________________________

DEALER NAME:

_____________________________________________________________________

PACKING LIST

Description Qty

Bolt, Carriage, M12x40x1.75, Gr. 8.8, YD 6

Nut, Flange, Nylon-Locking, M12x1.75, Gr. 8.8, YD 6

Bolt, Hex, 3/8" x 1 1/2", Gr. 8, YD 10

Nut, Hex, 3/8", Gr. 8, YD 10

Front Brackets L&R

Rear Mounting Bracket 1

Mesh Package Only

Nut, Flange, 5/16”, YD 8

Rear Clamshell Brackets for Door L&R

Bolt, Flange, 5/16" x 3/4", Gr. 5, YD 10

PARTS PHOTOS

Ruler for measuring nuts, bolts, and screws.

*NOTE –Parts photos are not to scale.

DECALS

1. Keep decals clean. Remove dirt with a wet clean cloth when necessary.

2. Replace safety decals if destroyed, missing, painted over or unreadable. If the tractor

safety decals are covered or obscured when the cab is mounted, purchase replacement

decals from the tractor manufacturer. Mount them in a readable location at, or near, their

original location before operating the tractor.

3. New cab decals and tractor decals are available from your Toro distributor/dealer.

CAUTION

The resulting noise levels when

using this product will exceed

OSHA standards for an 8 hour

workday and hearing protection

with a Noise Reduction Rating

(NRR) of 22 or higher is

required.

MOUNTING INSTRUCTIONS

Step 1. Take the front left under platform support bracket and position under the

platform. Fasten into place with two 3/8” x 1 ½” hex bolts and nuts into the side

of the operator platform.

_________________________________________________________

Step 2. Repeat for the right under platform bracket support bracket.

_________________________________________________________

Step 3. Lift the modular ROPS off of the shipping pallet with an over head hoist.

_________________________________________________________

Step 4.Slowly lower the ROPS onto the machine, and get the rear bracket over the 2-

post ROPS first.

_________________________________________________________

Step 5.Take the rear bracket and fasten to the modular ROPS in order to secure the

rear position first. Use the provided M12 fasteners.

_________________________________________________________

Step 6. Use the remaining 3/8” fasteners and bolt the front mount to the platform through

the support brackets installed earlier.

_________________________________________________________

Step 7. Torque all fasteners to recommended specifications.

_________________________________________________________

Torque Specifications:

M12 torque: 102 ft-lbs

3/8” torque: 48 ft-lbs

Dieses Handbuch passt für folgende Modelle

Andere Toro Rasenmäher Handbücher

Toro

Toro 20065 Bedienungsanleitung

Toro

Toro 04530 Bedienungsanleitung

Toro

Toro Recycler 20372 Bedienungsanleitung

Toro

Toro Z Master Professional 7500-DSeries Bedienungsanleitung

Toro

Toro 44529 Bedienungsanleitung

Toro

Toro 30643 Bedienungsanleitung

Toro

Toro Super Recycler 20384 Bedienungsanleitung

Toro

Toro 2000 Series Bedienungsanleitung

Toro

Toro ProCore 648 Bedienungsanleitung

Toro

Toro Titan 136-1654 Bedienungsanleitung

Toro

Toro 79110 Bedienungsanleitung

Toro

Toro Recycler 20958 Bedienungsanleitung

Toro

Toro 74570 Bedienungsanleitung

Toro

Toro 74686 Bedienungsanleitung

Toro

Toro Titan Z4800 Bedienungsanleitung

Toro

Toro Groundsmaster 4100-D Bedienungsanleitung

Toro

Toro GT2100 Bedienungsanleitung

Toro

Toro 30857 Bedienungsanleitung

Toro

Toro 74504TE Bedienungsanleitung

Toro

Toro GROUNDSMASTER 580-D 30581 Bedienungsanleitung

Toro

Toro Groundsmaster 3280-D Bedienungsanleitung

Toro

Toro 75304 Bedienungsanleitung

Toro

Toro 44409 Bedienungsanleitung

Toro

Toro Groundsmaster 4300-D Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 050 thru 062 Bedienungsanleitung