Toshiba Lite-Vision plus RBC-AMS51E-EN Bedienungsanleitung

Kurulum kılavuzu 141

Türkçe

Руководство по установке 113

Русский

Εγχειρίδιο εγκατάστασης 85

Ελληνικά

Instrukcja instalacyjna 57

Polski

Manuale di installazione 29

Italiano

Installation Manual 1

English

Lite-Vision plus Remote Controller

Model name:

RBC-AMS51E-EN

• Read this manual before using the RBC-

AMS51E-EN remote controller.

• Refer to the Installation Manual supplied with the

indoor unit for any installation instructions other

than operations of the remote controller.

Installation Manual

+01EN00COV.fm Page 1 Thursday, March 17, 2011 1:11 PM

–1–

Lite-Vision plus Remote Controller Installation Manual

Contents

Precautions for Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Accessory Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Requirements to install the remote controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Install the remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Wire the remote controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Requirements for wiring of group control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Requirements for installing two remote controllers. . . . . . . . . . . . . . . . . . . . . . . . 7

For first use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Monitor screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1. Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2. Name of room. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3. Screen contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4. Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5. Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6. Header/follower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

7. Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

8. Press & hold 4sec.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Field setting menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

1. Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2. Register service info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3. Alarm history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4. Monitor function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5. DN setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

+00EH97062301.book Page 1 Thursday, March 17, 2011 10:51 AM

–2–

Lite-Vision plus Remote Controller Installation Manual

Precautions for Safety

• Read these “Precautions for Safety” carefully before installation.

• The precautions described below include important items regarding safety. Observe them without fail.

Understand the following details (indications and symbols) before reading the body text, and follow the

instructions.

• Ask customer to keep this Manual at accessible place for future reference.

Indication Meaning of Indication

WARNING Text set off in this manner indicates that failure to adhere to the directions in the warning could result in

serious bodily harm (*1) or loss of life if the product is handled improperly.

CAUTION Text set off in this manner indicates that failure to adhere to the directions in the caution could result in

serious bodily injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other

injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long-

term treatment as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

Symbols Meaning of Symbols

“ " Indicates prohibited items.

Theactualcontentsof the prohibitionareindicatedbyapictureor text placed inside ornexttothegraphic

symbol.

“ " Indicates compulsory (mandatory) items.

The actual contents of the obligation indicated by a picture or text placed inside or next to the graphic

symbol.

WARNING

•Only a qualified installer or service person is allowed to do installation work.

Inappropriate installation may result in water leakage, electric shock or fire.

•Perform installation work properly according to the Installation Manual.

Inappropriate installation may result in water leakage, electric shock or fire.

•Electrical work must be performed by a qualified electrician in accordance with this

installation manual.

The work must satisfy all local, national and international regulations.

Inappropriate work may result in electric shock or fire.

•Use predefined wire and connect them certainly. Keep the connecting terminal free from

external force.

Improper wire connection or clamping may result in exothermic, fire or malfunction.

•The electrical work must satisfy all local, national and international regulations.

+00EH97062301.book Page 2 Thursday, March 17, 2011 10:51 AM

–3–

Lite-Vision plus Remote Controller Installation Manual

Accessory Parts

No. Part name Quantity

(1) Remote controller 1

(2) Screws (small)

M4 x 20 2

(3) Wood screws

M3.8 x 16 2

(4) Owner’s Manual 1

(5) Installation Manual

(This manual) 1

(6) CD-ROM 1

+00EH97062301.book Page 3 Thursday, March 17, 2011 10:51 AM

–4–

Lite-Vision plus Remote Controller Installation Manual

Installation

Requirements to install the remote controller

◆Installation place

• Install the remote controller at a height of 1 to 1.5 m from the floor so that the average temperature in the room

can be detected.

• Do not install the remote controller in a place exposed to direct sunlight or direct outside air, such as the side of

a window.

• Do not install the remote controller in a place behind something or to the rear side of an object, where air flow is

not sufficient.

• Do not install the remote controller in a freezing box or refrigerator, as the remote controller is not waterproof.

• Install the remote controller vertically to the wall.

◆Installation dimension

Room temperature sensor

4-Ø4.2×8 slotted hole

+00EH97062301.book Page 4 Thursday, March 17, 2011 10:51 AM

–5–

Lite-Vision plus Remote Controller Installation Manual

◆Remote control wiring and inter-unit wiring between remote controllers

Do not allow the wire for the remote controller (communication wire) and the wire for AC220-240 V to come into

contact or put them together in one electrical conduit; otherwise, the control system may have trouble due to noise.

* Varies depending on the type of remote controller used.

◆Installation of multiple remote controllers

To install two or more adjacent remote controllers, follow the instructions in the Fig. 1 and 2.

Wiring type VCTF: 0.5 mm2to 2.0 mm2x 2

Total length of remote control wiring

and inter-wiring between remote

controllers

(L+L1+L2+...Ln)

1 remote controller 2 remote controllers 2 remote controllers

includingawirelessremote

controller

Up to 500 m Up to 300 m Up to 400 m

Total length of inter-wiring between

remote controllers

(L1+L2+...Ln) Up to 200 m

Indoor

unit Indoor

unit

Indoor

unit

Remote control wiring

LL1 L2 Ln

(Up to 8 units)

Remote

controll

Remote controller inter-

units wires for group

control.

Wall

32.5 mm or more

(from a wall)

20 mm or more

(when adjacent remote

controllers are installed)

(Fig. 1)

32.5 mm or more

(from a wall)

20 mm or

50 mm or

86.5 mm or

50 mm or

Wall

(Fig. 2)

+00EH97062301.book Page 5 Thursday, March 17, 2011 10:51 AM

–6–

Lite-Vision plus Remote Controller Installation Manual

Install the remote controller

NOTE

• Wiring for the remote controller should not be bundled or installed in the same conduit with a power cable.; otherwise,

malfunction may result.

• Install the remote controller away from sources of electrical interference and electromagnetic fields.

1Insert a flat-blade screwdriver into the groove on the back side of the remote controller to remove

the rear case.

2Use the wood screws (2 pieces) supplied with the remote controller to attach the rear case of the

remote controller to the wall.

Do not use an electrical screwdriver. Do not over-tighten the screw (Tightening torque is up to 2

kg / f•cm.); otherwise, the rear case may be damaged.

3Connect the electrical wire from the indoor unit to the terminal block of remote controller.

(Refer to “Wire the remote controller”.)

Check the terminal number of electrical wire from the indoor unit to avoid miswiring.

(If AC 200-240 V is applied, the remote controller and indoor unit will break down.)

Rear case

Remote

controller

Wood screw x 2

+00EH97062301.book Page 6 Thursday, March 17, 2011 10:51 AM

–7–

Lite-Vision plus Remote Controller Installation Manual

Wire the remote controller

Wiring diagram

Terminal block for the remote control wiring on the indoor unit

Requirements for wiring of group control

• To make wiring of group control for indoor units of 4-way cassette type and other types, set the 4-way cassette

type as the header unit; otherwise, some settings such as the individual louver setting are not available.

• Tomakewiringof group control for the indoorunit with the automaticgrille-up/downfunctionandtheonewithout

the function, set the indoor unit with the automatic grille-up / down function as the header unit; otherwise, the

automatic grille-up / down function is not available.

Requirements for installing two remote controllers

Inthe dual remote controllersystem,oneor more units are operated from tworemotecontrollers.(Upto two remote

controllers can be installed.)

Set the follower remote controller

Set from “6. Header/follower” in “10. Initial setting” on the MENU screen.

For details, refer to the page 16.

Install the remote controllers

For the dual remote controller system, install the remote controllers as follows:

1Set one remote controller as the header remote controller.

(The remote controllers are set as “Header remote controller” as factory default.)

2When the dual remote controller system is installed by using this remote controller (RBC-

AMS51E-EN) with the other type of remote controller, set this remote controller as the header

remote controller.

Remote control wiring (procured locally)

Terminal block for

the remote control

wiring

Remote controller

* Terminals ofA andB

have no polarity.

* Use wire of 0.5 mm2to 2.0 mm2.

* A crimp-style terminal cannot be used.

+00EH97062301.book Page 7 Thursday, March 17, 2011 10:51 AM

–8–

Lite-Vision plus Remote Controller Installation Manual

Basic wiring diagram

NOTE

Terminals of A and B have no polarity.

To diverge from the indoor unit To diverge from the header remote controller

To operate a group control of multiple indoor units by two remote controllers

* The header or follower remote controller can be connected to any indoor unit.

Remote controlwiring

(Locally procured)

0.5 mm2to 2.0 mm2.

Remotecontroller

(header) Remotecontroller

(follower)

(Sold

separately)

Terminal block

for the remote

control wiring

Earth

Indoor unit

Remotecontrolwiring

(Locally procured)

0.5 mm2to 1.25 mm2.

Remotecontroller

(header) Remote controller

(follower)

(Sold

separately)

Terminal block

for the remote

control wiring

Earth

Indoor unit

Remote controller inter-unit wires for group

control (Locally procured)

Remotecontroller

(header) Remote controller

(follower)

(Sold

separately)

Terminal block for the

remote control wiring

Earth

Indoor unit

No.1

Earth Earth Earth

Indoor unit

No.2 Indoor unit

No.3 Indoor unit

No.8

+00EH97062301.book Page 8 Thursday, March 17, 2011 10:51 AM

–9–

Lite-Vision plus Remote Controller Installation Manual

For first use

It takes some time before the remote controller becomes operable when the remote controller is used for the first

time. This is not a malfunction.

It takes about 5 minutes before the remote controller becomes operable.

It takes about 1 minute before the remote controller becomes operable.

Note

For the operation of switching the room temperature sensor or the settings of the test operation, refer to the page

19.

Power on “ ” flashes “”

disappears Remote controllerbecomes

operable.

About 5

minutes

Power on “ ” flashes “”

disappears Remote controllerbecomes

operable.

About 1

minute

+00EH97062301.book Page 9 Thursday, March 17, 2011 10:51 AM

Inhaltsverzeichnis

Andere Toshiba Fernbedienung Handbücher

Toshiba

Toshiba RBC-AX31U(W)-UL Bedienungsanleitung

Toshiba

Toshiba RBC-AXU33UP-E Bedienungsanleitung

Toshiba

Toshiba RBC-AMT31-E Bedienungsanleitung

Toshiba

Toshiba RB-RWS21-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX31U-UL Bedienungsanleitung

Toshiba

Toshiba TCB-AX21E Bedienungsanleitung

Toshiba

Toshiba A3030D series Bedienungsanleitung

Toshiba

Toshiba RBC-AX32CE2 Bedienungsanleitung

Toshiba

Toshiba RBC-ASCU11-UL Bedienungsanleitung

Toshiba

Toshiba OIS40R Bedienungsanleitung

Toshiba

Toshiba RBC-AMS54E-UL Bedienungsanleitung

Toshiba

Toshiba Carrier TCB-AX21UL Bedienungsanleitung

Toshiba

Toshiba RB-RWS21-E Bedienungsanleitung

Toshiba

Toshiba RB-RWS20-E Bedienungsanleitung

Toshiba

Toshiba RBC-ASCU11-UL Bedienungsanleitung

Toshiba

Toshiba RBP-RC001-E Betriebsanleitung

Toshiba

Toshiba RBC-AXU33UPB-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX22CE Bedienungsanleitung

Toshiba

Toshiba TCB-SC643TLE Bedienungsanleitung

Toshiba

Toshiba Carrier RBC-AMS41UL Bedienungsanleitung

Toshiba

Toshiba TCB-AX21U-E Bedienungsanleitung

Toshiba

Toshiba XV55*D Series Bedienungsanleitung

Toshiba

Toshiba RBC-AX22CE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AMS54E Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung