TP-Link CPE610 Bedienungsanleitung

CPE610

Outdoor CPE

Installation Guide

Contents

Overview

Package Contents

Hardware Overview

Hardware Connection

Site Consideration

Hardware Installation

Power Supply

Lightning & ESD Protection

Software Configuration

Logging in to the PharOS

Configuration for a Typical Application

Antenna Alignment

Specifications

FAQ

TP-Link's Pharos series outdoor CPEs are dedicated to outdoor

wireless network solutions. This guide is applicable to the product

CPE610.

Overview

Package Contents

Power Cord Passive PoE Adapter

Installation Guide

CPE610

Installation Guide

Outdoor CPE

Pharos CPE Center Reflector Panel Side Reflector Panels

(Qty.2)

Bolts with Nut and Lock

Washer Assemblies

(M6×110, Qty.2)

Bolts with Nut and Lock

Washer Assemblies

(M6×70)

Rear Cover Mounting Bracket

(For CPE)

Pole-mount Clamp

ST3×10 Self-tapping Screws

(Qty.2)

D3×28 Plastic Wall Anchors

(Qty.2)

Mounting Bracket

(For PoE Adapter)

Protective Cap

Bottom View

Hardware Overview

Reflector Assembly

Securing Arms

Bubble Level

Mounting Bracket

Pole-mount Clamp

Rear Cover

On: A device is connected to this port, but there

is no activity.

Flashing: A device is connected to this port, and

is active.

On: The CPE is powered on.

Panel Layout

On: The wireless function is enabled.

Passive PoE Adapter

Power LED

On: Power on.

Off: Power off.

Remote Reset

Press and hold for 5 seconds to reset the CPE

to its factory defaults.

RESET

Press and hold for 5 seconds to reset the CPE to

its factory defaults.

ETHERNET

The port is to connect to the POE port of the

provided PoE adapter for both data transmission

and power supply through Ethernet cabling.

Hardware Connection

Site Consideration

Ensure a clear line of sight between the wireless devices for

optimum performance. An elevated location is recommended as

obstacles like trees, buildings and large steel structures will

weaken the wireless signal. See 'Q2' in 'FAQ' for details about

how to calculate the minimum mounting height of the devices.

Mounting Height

Line of Sight

Side View

Orientation

Install the CPE devices so that they point towards the devices

that will receive the signal. You can orient the devices with the

help of Google Maps, GPS and some landmarks. The horizontal

bandwidth of CPE610 is 6.8°.

shenzhen

Line of Sight

Horizontal

Beamwidth

1. Attach the Side Reflector Panels to the Center Reflector Panel

as follows:

a. Insert the two mounting studs on the Center Reflector

Panel into the large opening of the slots on the Side

Reflector Panel.

b. Slide the Side Reflector Panel until the mounting studs are

positioned over the narrow opening of the slots, and the top

edges of the panels should be aligned when done.

Hardware Installation

c. Repeat step a and step b to attach the other Side Reflector

Panel.

d. (Optional) Attach the Side Reflector Panels to the Center

Reflector Panel more securely using four M2.5x8 bolts and

nuts (not provided). This is recommended if the CPE device

is exposed to extreme weather, such as strong winds.

2. Attach the Rear Cover to the reflector assembly as follows:

a. While holding the reflector assembly, align the raised edges

on the back with the Securing Arms of the Rear Cover, and

align the Snap Hooks on the Rear Cover with the slots on

the Center Reflector Panel.

b. Attach the Rear Cover to the reflector assembly. Press upon

the Rear Cover at the four positions marked in the diagram

below in sequence until it locks into place.

WARNING: To avoid damage, do not place the panels on a flat

surface or push down on it.

Andere Handbücher für CPE610

Inhaltsverzeichnis

Andere TP-Link Netzwerk-Hardware Handbücher

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link VIGI NVR2016H Bedienungsanleitung

TP-Link

TP-Link TL-WA860RE Bedienungsanleitung

TP-Link

TP-Link tapo P306 Bedienungsanleitung

TP-Link

TP-Link AC3200 Bedienungsanleitung

TP-Link

TP-Link Deco M5 Handbuch

TP-Link

TP-Link VIGI NVR11104H-4P Bedienungsanleitung

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link JetStream TX432 Bedienungsanleitung

TP-Link

TP-Link HC2220-G1u Bedienungsanleitung

TP-Link

TP-Link TL-PA8033P Bedienungsanleitung

TP-Link

TP-Link TL-WPA4220 TKIT Bedienungsanleitung

TP-Link

TP-Link VIGI Bedienungsanleitung

TP-Link

TP-Link TL-SF1005D Bedienungsanleitung

TP-Link

TP-Link Archer C59 Bedienungsanleitung

TP-Link

TP-Link BBA Mesh Bedienungsanleitung

TP-Link

TP-Link GPON OLT P1200-08 Bedienungsanleitung

TP-Link

TP-Link VIGI NVR1004H-4P Bedienungsanleitung

TP-Link

TP-Link deco X20V2 Bedienungsanleitung

TP-Link

TP-Link VIGI NVR2016H-16MP Bedienungsanleitung

TP-Link

TP-Link deco X60V2 Bedienungsanleitung

TP-Link

TP-Link TL-POE170S Bedienungsanleitung

TP-Link

TP-Link VIGI NVR1008 Bedienungsanleitung

TP-Link

TP-Link Archer AX21 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung